Dynamite Friction 4302-72021 Disc Brake Kit - Front
Brake Kit for Mitsubishi Lancer Front
Upgrade the front brakes on your 2002-2007 Mitsubishi Lancer with the Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit, part number 4302-72021. This disc brake kit combines coated rotors and low-dust ceramic pads for a direct-service replacement focused on consistent stopping performance and cleaner operation.
Key Features
- Fits 2002-2007 Mitsubishi Lancer, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- DFC 3000 ceramic brake pads for stable friction and low dust
- Non-directional rotor finish for even pad bed-in and smoother braking
- Dry-processed rotors arrive ready to install
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Part number 4302-72021 for front brake service on Mitsubishi Lancer applications
Product Details
The DFC GEOSPEC rotor and 3000 ceramic pad combination is built for passenger vehicles and light-duty trucks that need dependable front brake service. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support quicker pad bed-in and quieter stops. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 3000 ceramic pads are post-cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. This part number 4302-72021 is a practical front brake solution for Mitsubishi Lancer owners looking for a complete rotor-and-pad service kit.
What It Helps Address
- Front brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake dust buildup on wheels
- Noise and vibration during braking
- Rust on exposed rotor surfaces
Installation Notes
Fits 2002-2007 Mitsubishi Lancer, front. Verify rotor size, caliper condition, and pad shape before installation. Clean the hub mounting surface and follow standard brake service procedures for torque, bedding, and inspection. The rotors are shipped dry and ready to install, so no oil removal step is required. Part number 4302-72021 may be referenced during ordering or service lookup for the Mitsubishi Lancer front axle.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the electronic mill-balance process. Each rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. The 3000 ceramic pads are post-cured, scorched, and assembled with premium shims to support stable friction and improved NVH characteristics.
Brake Kit for Mitsubishi Lancer Front
Upgrade the front brakes on your 2002-2007 Mitsubishi Lancer with the Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit, part number 4302-72021. This disc brake kit combines coated rotors and low-dust ceramic pads for a direct-service replacement focused on consistent stopping performance and cleaner operation.
Key Features
- Fits 2002-2007 Mitsubishi Lancer, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- DFC 3000 ceramic brake pads for stable friction and low dust
- Non-directional rotor finish for even pad bed-in and smoother braking
- Dry-processed rotors arrive ready to install
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Part number 4302-72021 for front brake service on Mitsubishi Lancer applications
Product Details
The DFC GEOSPEC rotor and 3000 ceramic pad combination is built for passenger vehicles and light-duty trucks that need dependable front brake service. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support quicker pad bed-in and quieter stops. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 3000 ceramic pads are post-cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. This part number 4302-72021 is a practical front brake solution for Mitsubishi Lancer owners looking for a complete rotor-and-pad service kit.
What It Helps Address
- Front brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake dust buildup on wheels
- Noise and vibration during braking
- Rust on exposed rotor surfaces
Installation Notes
Fits 2002-2007 Mitsubishi Lancer, front. Verify rotor size, caliper condition, and pad shape before installation. Clean the hub mounting surface and follow standard brake service procedures for torque, bedding, and inspection. The rotors are shipped dry and ready to install, so no oil removal step is required. Part number 4302-72021 may be referenced during ordering or service lookup for the Mitsubishi Lancer front axle.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the electronic mill-balance process. Each rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. The 3000 ceramic pads are post-cured, scorched, and assembled with premium shims to support stable friction and improved NVH characteristics.
Original: $126.97
-65%$126.97
$44.44Description
Brake Kit for Mitsubishi Lancer Front
Upgrade the front brakes on your 2002-2007 Mitsubishi Lancer with the Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit, part number 4302-72021. This disc brake kit combines coated rotors and low-dust ceramic pads for a direct-service replacement focused on consistent stopping performance and cleaner operation.
Key Features
- Fits 2002-2007 Mitsubishi Lancer, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- DFC 3000 ceramic brake pads for stable friction and low dust
- Non-directional rotor finish for even pad bed-in and smoother braking
- Dry-processed rotors arrive ready to install
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Part number 4302-72021 for front brake service on Mitsubishi Lancer applications
Product Details
The DFC GEOSPEC rotor and 3000 ceramic pad combination is built for passenger vehicles and light-duty trucks that need dependable front brake service. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support quicker pad bed-in and quieter stops. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 3000 ceramic pads are post-cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. This part number 4302-72021 is a practical front brake solution for Mitsubishi Lancer owners looking for a complete rotor-and-pad service kit.
What It Helps Address
- Front brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake dust buildup on wheels
- Noise and vibration during braking
- Rust on exposed rotor surfaces
Installation Notes
Fits 2002-2007 Mitsubishi Lancer, front. Verify rotor size, caliper condition, and pad shape before installation. Clean the hub mounting surface and follow standard brake service procedures for torque, bedding, and inspection. The rotors are shipped dry and ready to install, so no oil removal step is required. Part number 4302-72021 may be referenced during ordering or service lookup for the Mitsubishi Lancer front axle.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the electronic mill-balance process. Each rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. The 3000 ceramic pads are post-cured, scorched, and assembled with premium shims to support stable friction and improved NVH characteristics.
