Dynamite Friction 4302-59008 Disc Brake Kit - Front
Front Brake Kit for Honda Accord and Acura CL
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads is a front disc brake kit built for select 1990-1997 Honda Accord applications and 1997 Acura CL applications. Part number 4302-59008 combines coated rotors and ceramic pads in one service kit for a direct brake refresh on the front axle.
Key Features
- Front disc brake kit with rotors and ceramic pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for even pad bed-in and smoother braking
- 3000 Ceramic pads with low dust and stable friction across a wide temperature range
- Post-cured and scorched pads for consistent initial performance
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Built for passenger vehicles and light-duty trucks
Product Details
The DFC GEOSPEC rotor and 3000 Ceramic pad combination is engineered for drivers who want a complete front brake service with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact. The coated surface helps resist rust better than conventional painted or zinc-coated rotors, while the dry packaging saves prep time during installation. On the pad side, the 3000 Ceramic formulation is designed for reliable stopping performance, fade resistance, and low dust, making this kit a practical choice for Honda Accord front brake service and Acura CL front brake replacement. Part number 4302-59008 is also a useful reference when searching for a front brake kit for 1990-1997 Honda Accord or 1997 Acura CL applications.
Common Issues This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pad material or poor shim performance
- Excess brake dust from older friction compounds
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from heat-worn brake components
Installation Notes and Tips
Compatible With 1990-1997 Honda Accord, front; 1997 Acura CL, front. Verify caliper casting notes before ordering for 1997 Honda Accord applications, including Nissin rear calipers (casting # 9CLP-14S), Ambrake rear calipers (casting # 3402), and 1990-1993 Honda Accord Akebono front calipers (casting # AD57). Clean the hub mounting surface before installing the new rotors, and follow proper bedding procedures after installation to help establish even pad transfer. Part number 4302-59008 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and all vented rotors are electronically mill-balanced when required. The rotors are processed to OE specifications, and the kit is backed by a 12-month warranty against defects in material and workmanship on the rotor components.
Front Brake Kit for Honda Accord and Acura CL
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads is a front disc brake kit built for select 1990-1997 Honda Accord applications and 1997 Acura CL applications. Part number 4302-59008 combines coated rotors and ceramic pads in one service kit for a direct brake refresh on the front axle.
Key Features
- Front disc brake kit with rotors and ceramic pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for even pad bed-in and smoother braking
- 3000 Ceramic pads with low dust and stable friction across a wide temperature range
- Post-cured and scorched pads for consistent initial performance
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Built for passenger vehicles and light-duty trucks
Product Details
The DFC GEOSPEC rotor and 3000 Ceramic pad combination is engineered for drivers who want a complete front brake service with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact. The coated surface helps resist rust better than conventional painted or zinc-coated rotors, while the dry packaging saves prep time during installation. On the pad side, the 3000 Ceramic formulation is designed for reliable stopping performance, fade resistance, and low dust, making this kit a practical choice for Honda Accord front brake service and Acura CL front brake replacement. Part number 4302-59008 is also a useful reference when searching for a front brake kit for 1990-1997 Honda Accord or 1997 Acura CL applications.
Common Issues This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pad material or poor shim performance
- Excess brake dust from older friction compounds
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from heat-worn brake components
Installation Notes and Tips
Compatible With 1990-1997 Honda Accord, front; 1997 Acura CL, front. Verify caliper casting notes before ordering for 1997 Honda Accord applications, including Nissin rear calipers (casting # 9CLP-14S), Ambrake rear calipers (casting # 3402), and 1990-1993 Honda Accord Akebono front calipers (casting # AD57). Clean the hub mounting surface before installing the new rotors, and follow proper bedding procedures after installation to help establish even pad transfer. Part number 4302-59008 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and all vented rotors are electronically mill-balanced when required. The rotors are processed to OE specifications, and the kit is backed by a 12-month warranty against defects in material and workmanship on the rotor components.
Description
Front Brake Kit for Honda Accord and Acura CL
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads is a front disc brake kit built for select 1990-1997 Honda Accord applications and 1997 Acura CL applications. Part number 4302-59008 combines coated rotors and ceramic pads in one service kit for a direct brake refresh on the front axle.
Key Features
- Front disc brake kit with rotors and ceramic pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-shipped rotors ready for installation without oil removal
- Non-directional rotor finish for even pad bed-in and smoother braking
- 3000 Ceramic pads with low dust and stable friction across a wide temperature range
- Post-cured and scorched pads for consistent initial performance
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Built for passenger vehicles and light-duty trucks
Product Details
The DFC GEOSPEC rotor and 3000 Ceramic pad combination is engineered for drivers who want a complete front brake service with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact. The coated surface helps resist rust better than conventional painted or zinc-coated rotors, while the dry packaging saves prep time during installation. On the pad side, the 3000 Ceramic formulation is designed for reliable stopping performance, fade resistance, and low dust, making this kit a practical choice for Honda Accord front brake service and Acura CL front brake replacement. Part number 4302-59008 is also a useful reference when searching for a front brake kit for 1990-1997 Honda Accord or 1997 Acura CL applications.
Common Issues This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pad material or poor shim performance
- Excess brake dust from older friction compounds
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from heat-worn brake components
Installation Notes and Tips
Compatible With 1990-1997 Honda Accord, front; 1997 Acura CL, front. Verify caliper casting notes before ordering for 1997 Honda Accord applications, including Nissin rear calipers (casting # 9CLP-14S), Ambrake rear calipers (casting # 3402), and 1990-1993 Honda Accord Akebono front calipers (casting # AD57). Clean the hub mounting surface before installing the new rotors, and follow proper bedding procedures after installation to help establish even pad transfer. Part number 4302-59008 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and all vented rotors are electronically mill-balanced when required. The rotors are processed to OE specifications, and the kit is backed by a 12-month warranty against defects in material and workmanship on the rotor components.
