Dynamite Friction 4302-55002 Disc Brake Kit - Rear
Rear Brake Kit for Lincoln Town Car
This rear disc brake kit combines DFC GEOSPEC coated rotors with DFC 3000 ceramic brake pads for 2003-2011 Lincoln Town Car rear service. Part number 4302-55002 is built for drivers who want OE-style fitment, stable braking performance, and reduced brake dust in a single service kit.
Compatible With 2003-2011 Lincoln Town Car rear brake service, this kit is aimed at routine rotor and pad replacement on passenger vehicles that need consistent stopping performance and corrosion-resistant rotor surfaces.
- Rear disc brake kit for 2003-2011 Lincoln Town Car
- DFC GEOSPEC coated rotors with dry-to-install finish
- DFC 3000 ceramic pads for low dust and stable friction
- Non-directional rotor finish for smoother pad bed-in
- OE-style rotor metallurgy and machining tolerances
- Part number 4302-55002
DFC GEOSPEC Rotors and 3000 Ceramic Pads
The DFC GEOSPEC rotor design uses a corrosion-resistant silver-gray coating that helps protect non-friction surfaces from rust while remaining ready to install without oil removal or extra prep. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions to support quiet, even braking on the Lincoln Town Car rear axle.
The included DFC 3000 ceramic brake pads are formulated for passenger cars and light-duty trucks, with emphasis on reliable stopping, fade resistance, low dust, and stable friction across a wide temperature range. They are post-cured, scorched to reduce initial break-in, and fitted with premium rubber-steel-rubber shims to improve noise, vibration, and harshness control. Part number 4302-55002 is a direct service solution for rear brake refresh work.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or glazed friction material
- Excess brake dust from older pad compounds
- Rust buildup on rotor hats and non-friction surfaces
- Reduced stopping consistency during everyday driving
Installation Notes
Use this kit for rear brake service on the 2003-2011 Lincoln Town Car. The rotors are shipped dry and ready to install, which can reduce prep time during brake work. Before installation, inspect calipers, slides, and brake hoses, and follow the vehicle service procedure for pad bedding after assembly. Part number 4302-55002 should be matched to the rear position only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo machining and inspection checks for balance and critical dimensions. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 3000 ceramic pads are post-cured and scorched for stable friction performance and consistent initial operation.
Rear Brake Kit for Lincoln Town Car
This rear disc brake kit combines DFC GEOSPEC coated rotors with DFC 3000 ceramic brake pads for 2003-2011 Lincoln Town Car rear service. Part number 4302-55002 is built for drivers who want OE-style fitment, stable braking performance, and reduced brake dust in a single service kit.
Compatible With 2003-2011 Lincoln Town Car rear brake service, this kit is aimed at routine rotor and pad replacement on passenger vehicles that need consistent stopping performance and corrosion-resistant rotor surfaces.
- Rear disc brake kit for 2003-2011 Lincoln Town Car
- DFC GEOSPEC coated rotors with dry-to-install finish
- DFC 3000 ceramic pads for low dust and stable friction
- Non-directional rotor finish for smoother pad bed-in
- OE-style rotor metallurgy and machining tolerances
- Part number 4302-55002
DFC GEOSPEC Rotors and 3000 Ceramic Pads
The DFC GEOSPEC rotor design uses a corrosion-resistant silver-gray coating that helps protect non-friction surfaces from rust while remaining ready to install without oil removal or extra prep. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions to support quiet, even braking on the Lincoln Town Car rear axle.
The included DFC 3000 ceramic brake pads are formulated for passenger cars and light-duty trucks, with emphasis on reliable stopping, fade resistance, low dust, and stable friction across a wide temperature range. They are post-cured, scorched to reduce initial break-in, and fitted with premium rubber-steel-rubber shims to improve noise, vibration, and harshness control. Part number 4302-55002 is a direct service solution for rear brake refresh work.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or glazed friction material
- Excess brake dust from older pad compounds
- Rust buildup on rotor hats and non-friction surfaces
- Reduced stopping consistency during everyday driving
Installation Notes
Use this kit for rear brake service on the 2003-2011 Lincoln Town Car. The rotors are shipped dry and ready to install, which can reduce prep time during brake work. Before installation, inspect calipers, slides, and brake hoses, and follow the vehicle service procedure for pad bedding after assembly. Part number 4302-55002 should be matched to the rear position only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo machining and inspection checks for balance and critical dimensions. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 3000 ceramic pads are post-cured and scorched for stable friction performance and consistent initial operation.
Description
Rear Brake Kit for Lincoln Town Car
This rear disc brake kit combines DFC GEOSPEC coated rotors with DFC 3000 ceramic brake pads for 2003-2011 Lincoln Town Car rear service. Part number 4302-55002 is built for drivers who want OE-style fitment, stable braking performance, and reduced brake dust in a single service kit.
Compatible With 2003-2011 Lincoln Town Car rear brake service, this kit is aimed at routine rotor and pad replacement on passenger vehicles that need consistent stopping performance and corrosion-resistant rotor surfaces.
- Rear disc brake kit for 2003-2011 Lincoln Town Car
- DFC GEOSPEC coated rotors with dry-to-install finish
- DFC 3000 ceramic pads for low dust and stable friction
- Non-directional rotor finish for smoother pad bed-in
- OE-style rotor metallurgy and machining tolerances
- Part number 4302-55002
DFC GEOSPEC Rotors and 3000 Ceramic Pads
The DFC GEOSPEC rotor design uses a corrosion-resistant silver-gray coating that helps protect non-friction surfaces from rust while remaining ready to install without oil removal or extra prep. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions to support quiet, even braking on the Lincoln Town Car rear axle.
The included DFC 3000 ceramic brake pads are formulated for passenger cars and light-duty trucks, with emphasis on reliable stopping, fade resistance, low dust, and stable friction across a wide temperature range. They are post-cured, scorched to reduce initial break-in, and fitted with premium rubber-steel-rubber shims to improve noise, vibration, and harshness control. Part number 4302-55002 is a direct service solution for rear brake refresh work.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or glazed friction material
- Excess brake dust from older pad compounds
- Rust buildup on rotor hats and non-friction surfaces
- Reduced stopping consistency during everyday driving
Installation Notes
Use this kit for rear brake service on the 2003-2011 Lincoln Town Car. The rotors are shipped dry and ready to install, which can reduce prep time during brake work. Before installation, inspect calipers, slides, and brake hoses, and follow the vehicle service procedure for pad bedding after assembly. Part number 4302-55002 should be matched to the rear position only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo machining and inspection checks for balance and critical dimensions. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 3000 ceramic pads are post-cured and scorched for stable friction performance and consistent initial operation.
