Dynamite Friction 4302-54075 Disc Brake Kit - Rear
Rear Brake Kit for Ford F-150 and Lincoln Mark LT
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-54075, is a rear disc brake kit built for select Ford F-150 and Lincoln Mark LT applications. It combines coated rotors and low-dust ceramic pads for consistent stopping performance, quieter operation, and easier service.
Key Features
- Rear disc brake kit for select 2004-2011 Ford F-150 applications and 2006-2008 Lincoln Mark LT applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 3000 ceramic brake pads formulated for stable friction and low dust
- Post-cured and scorched pads for consistent initial bite and reduced break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- Dry, ready-to-install rotor coating that eliminates oil-cleaning prep
Product Details
The DFC GEOSPEC rotor and 3000 ceramic pad combination is engineered for drivers who want a direct-fit rear brake service solution with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and a protective coating that helps resist rust while simplifying installation. The ceramic pads are formulated for passenger vehicles and light-duty trucks, with stable friction across a wide temperature range and low dust output for cleaner wheel maintenance. This part number, 4302-54075, is a practical choice for rear brake service on Ford F-150 and Lincoln Mark LT models where dependable pedal feel and smooth stopping matter.
Used For
- Rear brake service on a Ford F-150 with 6-lug wheels
- Rear brake replacement on a Lincoln Mark LT with 6-lug wheels
- Reducing brake dust buildup on daily-driven trucks
- Addressing rotor rust and uneven braking feel
- Restoring quiet, smooth rear braking performance
Installation Notes
Fits 2004 Ford F-150, rear, New Body Style, 6 Lug Wheels. Fits 2005-2008 Ford F-150, rear, 6 Lug Wheels. Fits 2005-2011 Ford F-150, rear, 6 Lug Wheels, compatible with Drum Brake Hardware Kits; 2005-2008 applications note Bearing Retainer Nut 340-54503. Fits 2006-2008 Lincoln Mark LT, rear, 6 Lug Wheels, Base Payload Package; 2006-2008 applications note Bearing Retainer Nut 340-54503. Verify axle and brake configuration before service. The coated rotors are shipped dry and ready to install without additional cleaning.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors and final verification of critical dimensions. The rotors are covered by a 12-month warranty against defects in material and workmanship. DFC 3000 ceramic pads are post-cured and scorched to support stable friction performance from the first stop.
Rear Brake Kit for Ford F-150 and Lincoln Mark LT
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-54075, is a rear disc brake kit built for select Ford F-150 and Lincoln Mark LT applications. It combines coated rotors and low-dust ceramic pads for consistent stopping performance, quieter operation, and easier service.
Key Features
- Rear disc brake kit for select 2004-2011 Ford F-150 applications and 2006-2008 Lincoln Mark LT applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 3000 ceramic brake pads formulated for stable friction and low dust
- Post-cured and scorched pads for consistent initial bite and reduced break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- Dry, ready-to-install rotor coating that eliminates oil-cleaning prep
Product Details
The DFC GEOSPEC rotor and 3000 ceramic pad combination is engineered for drivers who want a direct-fit rear brake service solution with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and a protective coating that helps resist rust while simplifying installation. The ceramic pads are formulated for passenger vehicles and light-duty trucks, with stable friction across a wide temperature range and low dust output for cleaner wheel maintenance. This part number, 4302-54075, is a practical choice for rear brake service on Ford F-150 and Lincoln Mark LT models where dependable pedal feel and smooth stopping matter.
Used For
- Rear brake service on a Ford F-150 with 6-lug wheels
- Rear brake replacement on a Lincoln Mark LT with 6-lug wheels
- Reducing brake dust buildup on daily-driven trucks
- Addressing rotor rust and uneven braking feel
- Restoring quiet, smooth rear braking performance
Installation Notes
Fits 2004 Ford F-150, rear, New Body Style, 6 Lug Wheels. Fits 2005-2008 Ford F-150, rear, 6 Lug Wheels. Fits 2005-2011 Ford F-150, rear, 6 Lug Wheels, compatible with Drum Brake Hardware Kits; 2005-2008 applications note Bearing Retainer Nut 340-54503. Fits 2006-2008 Lincoln Mark LT, rear, 6 Lug Wheels, Base Payload Package; 2006-2008 applications note Bearing Retainer Nut 340-54503. Verify axle and brake configuration before service. The coated rotors are shipped dry and ready to install without additional cleaning.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors and final verification of critical dimensions. The rotors are covered by a 12-month warranty against defects in material and workmanship. DFC 3000 ceramic pads are post-cured and scorched to support stable friction performance from the first stop.
Description
Rear Brake Kit for Ford F-150 and Lincoln Mark LT
Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-54075, is a rear disc brake kit built for select Ford F-150 and Lincoln Mark LT applications. It combines coated rotors and low-dust ceramic pads for consistent stopping performance, quieter operation, and easier service.
Key Features
- Rear disc brake kit for select 2004-2011 Ford F-150 applications and 2006-2008 Lincoln Mark LT applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 3000 ceramic brake pads formulated for stable friction and low dust
- Post-cured and scorched pads for consistent initial bite and reduced break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- Dry, ready-to-install rotor coating that eliminates oil-cleaning prep
Product Details
The DFC GEOSPEC rotor and 3000 ceramic pad combination is engineered for drivers who want a direct-fit rear brake service solution with OE-style fit and finish. The rotors use G3000/G11H18 cast iron and a protective coating that helps resist rust while simplifying installation. The ceramic pads are formulated for passenger vehicles and light-duty trucks, with stable friction across a wide temperature range and low dust output for cleaner wheel maintenance. This part number, 4302-54075, is a practical choice for rear brake service on Ford F-150 and Lincoln Mark LT models where dependable pedal feel and smooth stopping matter.
Used For
- Rear brake service on a Ford F-150 with 6-lug wheels
- Rear brake replacement on a Lincoln Mark LT with 6-lug wheels
- Reducing brake dust buildup on daily-driven trucks
- Addressing rotor rust and uneven braking feel
- Restoring quiet, smooth rear braking performance
Installation Notes
Fits 2004 Ford F-150, rear, New Body Style, 6 Lug Wheels. Fits 2005-2008 Ford F-150, rear, 6 Lug Wheels. Fits 2005-2011 Ford F-150, rear, 6 Lug Wheels, compatible with Drum Brake Hardware Kits; 2005-2008 applications note Bearing Retainer Nut 340-54503. Fits 2006-2008 Lincoln Mark LT, rear, 6 Lug Wheels, Base Payload Package; 2006-2008 applications note Bearing Retainer Nut 340-54503. Verify axle and brake configuration before service. The coated rotors are shipped dry and ready to install without additional cleaning.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, including balance checks on vented rotors and final verification of critical dimensions. The rotors are covered by a 12-month warranty against defects in material and workmanship. DFC 3000 ceramic pads are post-cured and scorched to support stable friction performance from the first stop.
