Dynamite Friction 4302-47044 Disc Brake Kit - Front
Front Brake Kit for Select Chevrolet Models
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is a front disc brake service kit built for select Chevrolet passenger cars and light-duty applications. Part number 4302-47044 combines coated rotors with ceramic pads for a complete front brake refresh on vehicles such as the Chevrolet Bolt EV, Bolt EUV, Cruze, Sonic, and Volt.
Key Features
- Front disc brake kit with DFC GEOSPEC coated rotors and DFC 3000 ceramic brake pads
- Coated rotor surface helps resist rust and arrives dry, ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Ceramic pad formulation is tuned for low dust, stable friction, and fade resistance
- Post-cured and scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor construction with G3000/G11H18 cast iron specification
Product Line Details
DFC GEOSPEC rotors are coated for corrosion resistance and machined to tight tolerances for OE-style fit and finish. The 3000 Ceramic Brake Pads are aimed at passenger vehicles and light-duty trucks, with a low-copper formulation that meets California and Washington requirements for 2021/2025 regulations. Together, these components provide a practical front brake service solution for everyday driving.
Vehicle Fitment
- Fits 2022 Chevrolet Bolt EUV, front
- Fits 2022 Chevrolet Bolt EV, front
- Fits 2017-2021 Chevrolet Bolt EV, front
- Fits 2018-2020 Chevrolet Sonic, front
- Fits 2016-2019 Chevrolet Cruze, front; standard brakes with 276mm front rotors
- Fits 2016-2019 Chevrolet Volt, front
- Fits 2018 Chevrolet Cruze, front; Mexico build with upgraded front pads and spreader spring tabs
What This Kit Helps Address
- Front brake wear from normal stop-and-go driving
- Brake noise caused by worn pads or uneven rotor surfaces
- Excess brake dust from older friction material
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from heat-affected components
Installation Notes
Use this kit for front axle brake service only. Confirm rotor size, pad style, and vehicle configuration before ordering, especially on 2016-2019 Chevrolet Cruze applications and the 2018 Cruze Mexico build note. The rotors are shipped dry and ready for installation, which can reduce prep time during brake service. After installation, follow a proper pad and rotor bed-in procedure for consistent results.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and the finished rotor set is backed by a 12-month warranty against defects in material and workmanship. Part number 4302-47044 is built to OE-style specifications for dependable front brake service.
Front Brake Kit for Select Chevrolet Models
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is a front disc brake service kit built for select Chevrolet passenger cars and light-duty applications. Part number 4302-47044 combines coated rotors with ceramic pads for a complete front brake refresh on vehicles such as the Chevrolet Bolt EV, Bolt EUV, Cruze, Sonic, and Volt.
Key Features
- Front disc brake kit with DFC GEOSPEC coated rotors and DFC 3000 ceramic brake pads
- Coated rotor surface helps resist rust and arrives dry, ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Ceramic pad formulation is tuned for low dust, stable friction, and fade resistance
- Post-cured and scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor construction with G3000/G11H18 cast iron specification
Product Line Details
DFC GEOSPEC rotors are coated for corrosion resistance and machined to tight tolerances for OE-style fit and finish. The 3000 Ceramic Brake Pads are aimed at passenger vehicles and light-duty trucks, with a low-copper formulation that meets California and Washington requirements for 2021/2025 regulations. Together, these components provide a practical front brake service solution for everyday driving.
Vehicle Fitment
- Fits 2022 Chevrolet Bolt EUV, front
- Fits 2022 Chevrolet Bolt EV, front
- Fits 2017-2021 Chevrolet Bolt EV, front
- Fits 2018-2020 Chevrolet Sonic, front
- Fits 2016-2019 Chevrolet Cruze, front; standard brakes with 276mm front rotors
- Fits 2016-2019 Chevrolet Volt, front
- Fits 2018 Chevrolet Cruze, front; Mexico build with upgraded front pads and spreader spring tabs
What This Kit Helps Address
- Front brake wear from normal stop-and-go driving
- Brake noise caused by worn pads or uneven rotor surfaces
- Excess brake dust from older friction material
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from heat-affected components
Installation Notes
Use this kit for front axle brake service only. Confirm rotor size, pad style, and vehicle configuration before ordering, especially on 2016-2019 Chevrolet Cruze applications and the 2018 Cruze Mexico build note. The rotors are shipped dry and ready for installation, which can reduce prep time during brake service. After installation, follow a proper pad and rotor bed-in procedure for consistent results.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and the finished rotor set is backed by a 12-month warranty against defects in material and workmanship. Part number 4302-47044 is built to OE-style specifications for dependable front brake service.
Description
Front Brake Kit for Select Chevrolet Models
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is a front disc brake service kit built for select Chevrolet passenger cars and light-duty applications. Part number 4302-47044 combines coated rotors with ceramic pads for a complete front brake refresh on vehicles such as the Chevrolet Bolt EV, Bolt EUV, Cruze, Sonic, and Volt.
Key Features
- Front disc brake kit with DFC GEOSPEC coated rotors and DFC 3000 ceramic brake pads
- Coated rotor surface helps resist rust and arrives dry, ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Ceramic pad formulation is tuned for low dust, stable friction, and fade resistance
- Post-cured and scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style rotor construction with G3000/G11H18 cast iron specification
Product Line Details
DFC GEOSPEC rotors are coated for corrosion resistance and machined to tight tolerances for OE-style fit and finish. The 3000 Ceramic Brake Pads are aimed at passenger vehicles and light-duty trucks, with a low-copper formulation that meets California and Washington requirements for 2021/2025 regulations. Together, these components provide a practical front brake service solution for everyday driving.
Vehicle Fitment
- Fits 2022 Chevrolet Bolt EUV, front
- Fits 2022 Chevrolet Bolt EV, front
- Fits 2017-2021 Chevrolet Bolt EV, front
- Fits 2018-2020 Chevrolet Sonic, front
- Fits 2016-2019 Chevrolet Cruze, front; standard brakes with 276mm front rotors
- Fits 2016-2019 Chevrolet Volt, front
- Fits 2018 Chevrolet Cruze, front; Mexico build with upgraded front pads and spreader spring tabs
What This Kit Helps Address
- Front brake wear from normal stop-and-go driving
- Brake noise caused by worn pads or uneven rotor surfaces
- Excess brake dust from older friction material
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from heat-affected components
Installation Notes
Use this kit for front axle brake service only. Confirm rotor size, pad style, and vehicle configuration before ordering, especially on 2016-2019 Chevrolet Cruze applications and the 2018 Cruze Mexico build note. The rotors are shipped dry and ready for installation, which can reduce prep time during brake service. After installation, follow a proper pad and rotor bed-in procedure for consistent results.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and the finished rotor set is backed by a 12-month warranty against defects in material and workmanship. Part number 4302-47044 is built to OE-style specifications for dependable front brake service.
