Dynamite Friction 4302-42018 Disc Brake Kit - Front
DFC GEOSPEC Front Brake Kit for Wrangler
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is a front disc brake service kit for Jeep Wrangler applications with standard brakes. It combines coated GEOSPEC rotors with low-dust ceramic pads to support consistent stopping performance, quieter operation, and cleaner wheel maintenance on daily-driven Wrangler models.
Key Features
- Front disc brake kit for 2007-2018 Jeep Wrangler and 2018 Jeep Wrangler JK applications with standard brakes
- DFC GEOSPEC coated rotors help resist rust and arrive dry, ready for installation
- 3000 Ceramic Brake Pads are formulated for stable friction, low dust, and fade resistance
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Post-cured and scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Line Details
The DFC GEOSPEC rotor line uses a corrosion-resistant silver-gray coating and OE-style G3000/G11H18 cast iron construction. The 3000 Ceramic Brake Pads line is tuned for passenger vehicles and light-duty trucks, with low copper content for California and Washington requirements and a formulation aimed at reliable street use.
Detailed Description
Part number 4302-42018 is built for front brake service on Jeep Wrangler models listed in the fitment data, including 2007-2011 Wrangler, 2012-2017 Wrangler, and 2018 Wrangler and Wrangler JK with standard brakes. This kit pairs DFC GEOSPEC rotors with 3000 Ceramic Brake Pads to deliver a complete front brake refresh for Wrangler owners looking for OE-style rotor construction, corrosion protection, and predictable pedal response. The rotors are machined to tight tolerances and finished for balanced, quieter operation, while the pads are designed to maintain stable friction across a wide temperature range.
What It Helps Address
- Brake noise during everyday driving
- Excessive brake dust on wheels
- Rust buildup on exposed rotor surfaces
- Uneven or inconsistent braking feel
- Reduced stopping performance from worn front brake components
Installation Notes and Tips
Compatible With front brake service only. Verify rotor diameter and brake configuration before ordering; this listing references standard brakes with 302mm front rotors where noted. Clean the rotor friction surfaces before installation if needed, and follow a proper pad bed-in procedure after service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched to support stable friction performance from the first stop.
DFC GEOSPEC Front Brake Kit for Wrangler
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is a front disc brake service kit for Jeep Wrangler applications with standard brakes. It combines coated GEOSPEC rotors with low-dust ceramic pads to support consistent stopping performance, quieter operation, and cleaner wheel maintenance on daily-driven Wrangler models.
Key Features
- Front disc brake kit for 2007-2018 Jeep Wrangler and 2018 Jeep Wrangler JK applications with standard brakes
- DFC GEOSPEC coated rotors help resist rust and arrive dry, ready for installation
- 3000 Ceramic Brake Pads are formulated for stable friction, low dust, and fade resistance
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Post-cured and scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Line Details
The DFC GEOSPEC rotor line uses a corrosion-resistant silver-gray coating and OE-style G3000/G11H18 cast iron construction. The 3000 Ceramic Brake Pads line is tuned for passenger vehicles and light-duty trucks, with low copper content for California and Washington requirements and a formulation aimed at reliable street use.
Detailed Description
Part number 4302-42018 is built for front brake service on Jeep Wrangler models listed in the fitment data, including 2007-2011 Wrangler, 2012-2017 Wrangler, and 2018 Wrangler and Wrangler JK with standard brakes. This kit pairs DFC GEOSPEC rotors with 3000 Ceramic Brake Pads to deliver a complete front brake refresh for Wrangler owners looking for OE-style rotor construction, corrosion protection, and predictable pedal response. The rotors are machined to tight tolerances and finished for balanced, quieter operation, while the pads are designed to maintain stable friction across a wide temperature range.
What It Helps Address
- Brake noise during everyday driving
- Excessive brake dust on wheels
- Rust buildup on exposed rotor surfaces
- Uneven or inconsistent braking feel
- Reduced stopping performance from worn front brake components
Installation Notes and Tips
Compatible With front brake service only. Verify rotor diameter and brake configuration before ordering; this listing references standard brakes with 302mm front rotors where noted. Clean the rotor friction surfaces before installation if needed, and follow a proper pad bed-in procedure after service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched to support stable friction performance from the first stop.
Description
DFC GEOSPEC Front Brake Kit for Wrangler
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is a front disc brake service kit for Jeep Wrangler applications with standard brakes. It combines coated GEOSPEC rotors with low-dust ceramic pads to support consistent stopping performance, quieter operation, and cleaner wheel maintenance on daily-driven Wrangler models.
Key Features
- Front disc brake kit for 2007-2018 Jeep Wrangler and 2018 Jeep Wrangler JK applications with standard brakes
- DFC GEOSPEC coated rotors help resist rust and arrive dry, ready for installation
- 3000 Ceramic Brake Pads are formulated for stable friction, low dust, and fade resistance
- Non-directional rotor finish supports even pad bed-in and smoother braking
- Post-cured and scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Line Details
The DFC GEOSPEC rotor line uses a corrosion-resistant silver-gray coating and OE-style G3000/G11H18 cast iron construction. The 3000 Ceramic Brake Pads line is tuned for passenger vehicles and light-duty trucks, with low copper content for California and Washington requirements and a formulation aimed at reliable street use.
Detailed Description
Part number 4302-42018 is built for front brake service on Jeep Wrangler models listed in the fitment data, including 2007-2011 Wrangler, 2012-2017 Wrangler, and 2018 Wrangler and Wrangler JK with standard brakes. This kit pairs DFC GEOSPEC rotors with 3000 Ceramic Brake Pads to deliver a complete front brake refresh for Wrangler owners looking for OE-style rotor construction, corrosion protection, and predictable pedal response. The rotors are machined to tight tolerances and finished for balanced, quieter operation, while the pads are designed to maintain stable friction across a wide temperature range.
What It Helps Address
- Brake noise during everyday driving
- Excessive brake dust on wheels
- Rust buildup on exposed rotor surfaces
- Uneven or inconsistent braking feel
- Reduced stopping performance from worn front brake components
Installation Notes and Tips
Compatible With front brake service only. Verify rotor diameter and brake configuration before ordering; this listing references standard brakes with 302mm front rotors where noted. Clean the rotor friction surfaces before installation if needed, and follow a proper pad bed-in procedure after service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched to support stable friction performance from the first stop.
