Dynamite Friction 4302-40023 Disc Brake Kit - Front
Brake Kit for Dodge Dakota and Durango
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is built for front brake service on select 2000-2002 Dodge Dakota and 2000-2002 Dodge Durango applications. This disc brake kit combines coated rotors and ceramic pads to support consistent stopping performance, low dust, and quieter operation.
Key Features
- Front disc brake kit for select Dodge Dakota and Dodge Durango models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 3000 ceramic pads are post-cured and scorched for stable friction from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Low-copper pad formulation meets California and Washington requirements referenced by the manufacturer
Product Details
DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-40023, pairs OE-style rotor construction with ceramic friction material for everyday driving and light-duty truck use. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. For shoppers searching for a front brake kit for 2000-2002 Dodge Dakota with rear drums or a front brake kit for 2000-2002 Dodge Durango, this package provides the core components needed for a complete front brake refresh. Part number 4302-40023 is also a practical reference when comparing DFC brake kit listings for these vehicles.
The DFC 3000 ceramic pads are formulated for reliable stopping, fade resistance, and low dust output across a wide temperature range. The rotor coating helps resist rust during storage and service, while the dry-ready finish reduces prep time during installation. This kit is designed for drivers who want a direct replacement brake service solution with consistent pedal feel and reduced brake noise.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven front rotors
- Excessive brake dust from older pad material
- Noise during braking from worn pads or degraded shims
- Reduced stopping performance from heat-affected friction surfaces
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify front axle fitment before ordering. This kit is listed for Fits 2000-2002 Dodge Dakota, front and Fits 2000-2002 Dodge Durango, front. For Dakota applications, notes include rear disc brake rotor designed for 11 inch rear drums or 9 inch rear drums, so rear brake configuration should be confirmed during service planning. Clean the hub mounting surface before installation, follow proper torque procedures, and perform a controlled pad bed-in after installation to help establish even transfer on the rotor face.
Quality Assurance
Each rotor is 100% inspected for critical attributes, and vented rotors are balance-checked and corrected when needed. DFC states that every rotor in this line is covered by a 12-month warranty against defects in material and workmanship.
Brake Kit for Dodge Dakota and Durango
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is built for front brake service on select 2000-2002 Dodge Dakota and 2000-2002 Dodge Durango applications. This disc brake kit combines coated rotors and ceramic pads to support consistent stopping performance, low dust, and quieter operation.
Key Features
- Front disc brake kit for select Dodge Dakota and Dodge Durango models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 3000 ceramic pads are post-cured and scorched for stable friction from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Low-copper pad formulation meets California and Washington requirements referenced by the manufacturer
Product Details
DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-40023, pairs OE-style rotor construction with ceramic friction material for everyday driving and light-duty truck use. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. For shoppers searching for a front brake kit for 2000-2002 Dodge Dakota with rear drums or a front brake kit for 2000-2002 Dodge Durango, this package provides the core components needed for a complete front brake refresh. Part number 4302-40023 is also a practical reference when comparing DFC brake kit listings for these vehicles.
The DFC 3000 ceramic pads are formulated for reliable stopping, fade resistance, and low dust output across a wide temperature range. The rotor coating helps resist rust during storage and service, while the dry-ready finish reduces prep time during installation. This kit is designed for drivers who want a direct replacement brake service solution with consistent pedal feel and reduced brake noise.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven front rotors
- Excessive brake dust from older pad material
- Noise during braking from worn pads or degraded shims
- Reduced stopping performance from heat-affected friction surfaces
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify front axle fitment before ordering. This kit is listed for Fits 2000-2002 Dodge Dakota, front and Fits 2000-2002 Dodge Durango, front. For Dakota applications, notes include rear disc brake rotor designed for 11 inch rear drums or 9 inch rear drums, so rear brake configuration should be confirmed during service planning. Clean the hub mounting surface before installation, follow proper torque procedures, and perform a controlled pad bed-in after installation to help establish even transfer on the rotor face.
Quality Assurance
Each rotor is 100% inspected for critical attributes, and vented rotors are balance-checked and corrected when needed. DFC states that every rotor in this line is covered by a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Dodge Dakota and Durango
The Dynamite Friction DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads kit is built for front brake service on select 2000-2002 Dodge Dakota and 2000-2002 Dodge Durango applications. This disc brake kit combines coated rotors and ceramic pads to support consistent stopping performance, low dust, and quieter operation.
Key Features
- Front disc brake kit for select Dodge Dakota and Dodge Durango models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 3000 ceramic pads are post-cured and scorched for stable friction from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Low-copper pad formulation meets California and Washington requirements referenced by the manufacturer
Product Details
DFC GEOSPEC Rotors with 3000 Ceramic Brake Pads, part number 4302-40023, pairs OE-style rotor construction with ceramic friction material for everyday driving and light-duty truck use. The rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. For shoppers searching for a front brake kit for 2000-2002 Dodge Dakota with rear drums or a front brake kit for 2000-2002 Dodge Durango, this package provides the core components needed for a complete front brake refresh. Part number 4302-40023 is also a practical reference when comparing DFC brake kit listings for these vehicles.
The DFC 3000 ceramic pads are formulated for reliable stopping, fade resistance, and low dust output across a wide temperature range. The rotor coating helps resist rust during storage and service, while the dry-ready finish reduces prep time during installation. This kit is designed for drivers who want a direct replacement brake service solution with consistent pedal feel and reduced brake noise.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven front rotors
- Excessive brake dust from older pad material
- Noise during braking from worn pads or degraded shims
- Reduced stopping performance from heat-affected friction surfaces
- Rust buildup on exposed rotor surfaces
Installation Notes
Verify front axle fitment before ordering. This kit is listed for Fits 2000-2002 Dodge Dakota, front and Fits 2000-2002 Dodge Durango, front. For Dakota applications, notes include rear disc brake rotor designed for 11 inch rear drums or 9 inch rear drums, so rear brake configuration should be confirmed during service planning. Clean the hub mounting surface before installation, follow proper torque procedures, and perform a controlled pad bed-in after installation to help establish even transfer on the rotor face.
Quality Assurance
Each rotor is 100% inspected for critical attributes, and vented rotors are balance-checked and corrected when needed. DFC states that every rotor in this line is covered by a 12-month warranty against defects in material and workmanship.
