Dynamite Friction 4004-91002 Disc Brake Kit - Front and Rear
Brake Service Kit for Scion xA and xB
The Dynamite Friction DFC Geospec Rotors includes DFC Drums brake service kit is built for front and rear brake service on select Scion models with rear drums and shoe kit. Part number 4004-91002 covers the rotor-and-drum combination needed for a complete brake refresh on 2004-2006 Scion xA and 2004-2006 Scion xB applications.
Key Features
- Disc brake kit for front and rear service
- Fits 2004-2006 Scion xA, front and rear, with rear drums and shoe kit
- Fits 2004-2006 Scion xB, front and rear, with rear drums and shoe kit
- DFC Geospec Rotors includes DFC Drums product line
- Part number 4004-91002 for application matching
Product Details
DFC Geospec Rotors includes DFC Drums is a Dynamite Friction product line focused on matching the brake components required for vehicles that use disc brakes at one end and drums at the other. For the Scion xA and Scion xB, this kit supports a full brake service setup where the rear axle uses drums and shoe kit components. If you are searching for a 2004-2006 Scion xA front and rear brake kit or a 2004-2006 Scion xB front and rear brake kit, part number 4004-91002 is the direct fitment reference.
Common Brake Issues This Kit Addresses
- Worn brake rotors and drum surfaces
- Pulsation or vibration during braking
- Reduced stopping performance from worn friction surfaces
- Brake noise caused by uneven rotor or drum wear
- Service needs on Scion xA and Scion xB models with rear drums
Installation Notes
Verify that the vehicle has rear drums and shoe kit before ordering. Confirm year, make, model, and brake configuration against the fitment data for 2004-2006 Scion xA and 2004-2006 Scion xB. Part number 4004-91002 should be matched to the exact brake setup listed for the vehicle.
Quality Assurance
Dynamite Friction identifies this kit as part of its DFC Geospec Rotors includes DFC Drums line, which groups the rotor and drum components needed for the listed applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Brake Service Kit for Scion xA and xB
The Dynamite Friction DFC Geospec Rotors includes DFC Drums brake service kit is built for front and rear brake service on select Scion models with rear drums and shoe kit. Part number 4004-91002 covers the rotor-and-drum combination needed for a complete brake refresh on 2004-2006 Scion xA and 2004-2006 Scion xB applications.
Key Features
- Disc brake kit for front and rear service
- Fits 2004-2006 Scion xA, front and rear, with rear drums and shoe kit
- Fits 2004-2006 Scion xB, front and rear, with rear drums and shoe kit
- DFC Geospec Rotors includes DFC Drums product line
- Part number 4004-91002 for application matching
Product Details
DFC Geospec Rotors includes DFC Drums is a Dynamite Friction product line focused on matching the brake components required for vehicles that use disc brakes at one end and drums at the other. For the Scion xA and Scion xB, this kit supports a full brake service setup where the rear axle uses drums and shoe kit components. If you are searching for a 2004-2006 Scion xA front and rear brake kit or a 2004-2006 Scion xB front and rear brake kit, part number 4004-91002 is the direct fitment reference.
Common Brake Issues This Kit Addresses
- Worn brake rotors and drum surfaces
- Pulsation or vibration during braking
- Reduced stopping performance from worn friction surfaces
- Brake noise caused by uneven rotor or drum wear
- Service needs on Scion xA and Scion xB models with rear drums
Installation Notes
Verify that the vehicle has rear drums and shoe kit before ordering. Confirm year, make, model, and brake configuration against the fitment data for 2004-2006 Scion xA and 2004-2006 Scion xB. Part number 4004-91002 should be matched to the exact brake setup listed for the vehicle.
Quality Assurance
Dynamite Friction identifies this kit as part of its DFC Geospec Rotors includes DFC Drums line, which groups the rotor and drum components needed for the listed applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $205.53
-65%$205.53
$71.94Description
Brake Service Kit for Scion xA and xB
The Dynamite Friction DFC Geospec Rotors includes DFC Drums brake service kit is built for front and rear brake service on select Scion models with rear drums and shoe kit. Part number 4004-91002 covers the rotor-and-drum combination needed for a complete brake refresh on 2004-2006 Scion xA and 2004-2006 Scion xB applications.
Key Features
- Disc brake kit for front and rear service
- Fits 2004-2006 Scion xA, front and rear, with rear drums and shoe kit
- Fits 2004-2006 Scion xB, front and rear, with rear drums and shoe kit
- DFC Geospec Rotors includes DFC Drums product line
- Part number 4004-91002 for application matching
Product Details
DFC Geospec Rotors includes DFC Drums is a Dynamite Friction product line focused on matching the brake components required for vehicles that use disc brakes at one end and drums at the other. For the Scion xA and Scion xB, this kit supports a full brake service setup where the rear axle uses drums and shoe kit components. If you are searching for a 2004-2006 Scion xA front and rear brake kit or a 2004-2006 Scion xB front and rear brake kit, part number 4004-91002 is the direct fitment reference.
Common Brake Issues This Kit Addresses
- Worn brake rotors and drum surfaces
- Pulsation or vibration during braking
- Reduced stopping performance from worn friction surfaces
- Brake noise caused by uneven rotor or drum wear
- Service needs on Scion xA and Scion xB models with rear drums
Installation Notes
Verify that the vehicle has rear drums and shoe kit before ordering. Confirm year, make, model, and brake configuration against the fitment data for 2004-2006 Scion xA and 2004-2006 Scion xB. Part number 4004-91002 should be matched to the exact brake setup listed for the vehicle.
Quality Assurance
Dynamite Friction identifies this kit as part of its DFC Geospec Rotors includes DFC Drums line, which groups the rotor and drum components needed for the listed applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
