Dynamite Friction 4000-1658-00 Disc Brake Pad Set - Front
DFC 4000 HybriDynamic Brake Pads for Mitsubishi i-MiEV
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for front brake service on select Mitsubishi i-MiEV models. This disc brake pad set focuses on consistent pedal feel, predictable brake response, low dust, and reduced noise for everyday driving.
Compatible with 2012, 2014, and 2016-2017 Mitsubishi i-MiEV front brake applications, part number 4000-1658-00 is a direct-fit disc brake pad set for drivers looking for a balanced hybrid friction material.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for daily use
- Integrally molded friction material attachment
- Pad quantity: 4
- Prepared for pad wear sensor use
- Front disc brake pad set for Mitsubishi i-MiEV applications
- Part number 4000-1658-00
DFC HybriDynamic Brake Pad Line
The DFC 4000 HybriDynamic Brake Pad line is positioned as a value-focused brake pad family that simplifies material selection by using a hybrid formulation. For Mitsubishi i-MiEV owners, this means a front pad set that aims to deliver steady pedal response and dependable stopping performance without adding unnecessary brake dust or noise.
Detailed Description
These Dynamite Friction brake pads measure 108.5 mm wide, 42.9 mm high, and 14.7 mm thick for both inner and outer pads. The set is prepared for a mechanical pad wear sensor, while the sensor itself is not included. Mounting hardware is not included. If you are replacing the front brake pads on a 2012, 2014, or 2016-2017 Mitsubishi i-MiEV, part number 4000-1658-00 provides the correct fitment listed for those vehicles.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part Can Address
- Worn front brake pads on a Mitsubishi i-MiEV
- Brake noise during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel from aged pads
- Reduced braking response caused by pad wear
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Because the pads are prepared for a mechanical wear sensor, confirm whether your vehicle uses that setup before reassembly. Replace pads in axle pairs and inspect the braking system for wear, contamination, or uneven contact surfaces during service.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a consistent, value-oriented brake pad solution for everyday driving. Part number 4000-1658-00 is specified for front brake applications on the listed Mitsubishi i-MiEV model years.
DFC 4000 HybriDynamic Brake Pads for Mitsubishi i-MiEV
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for front brake service on select Mitsubishi i-MiEV models. This disc brake pad set focuses on consistent pedal feel, predictable brake response, low dust, and reduced noise for everyday driving.
Compatible with 2012, 2014, and 2016-2017 Mitsubishi i-MiEV front brake applications, part number 4000-1658-00 is a direct-fit disc brake pad set for drivers looking for a balanced hybrid friction material.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for daily use
- Integrally molded friction material attachment
- Pad quantity: 4
- Prepared for pad wear sensor use
- Front disc brake pad set for Mitsubishi i-MiEV applications
- Part number 4000-1658-00
DFC HybriDynamic Brake Pad Line
The DFC 4000 HybriDynamic Brake Pad line is positioned as a value-focused brake pad family that simplifies material selection by using a hybrid formulation. For Mitsubishi i-MiEV owners, this means a front pad set that aims to deliver steady pedal response and dependable stopping performance without adding unnecessary brake dust or noise.
Detailed Description
These Dynamite Friction brake pads measure 108.5 mm wide, 42.9 mm high, and 14.7 mm thick for both inner and outer pads. The set is prepared for a mechanical pad wear sensor, while the sensor itself is not included. Mounting hardware is not included. If you are replacing the front brake pads on a 2012, 2014, or 2016-2017 Mitsubishi i-MiEV, part number 4000-1658-00 provides the correct fitment listed for those vehicles.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part Can Address
- Worn front brake pads on a Mitsubishi i-MiEV
- Brake noise during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel from aged pads
- Reduced braking response caused by pad wear
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Because the pads are prepared for a mechanical wear sensor, confirm whether your vehicle uses that setup before reassembly. Replace pads in axle pairs and inspect the braking system for wear, contamination, or uneven contact surfaces during service.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a consistent, value-oriented brake pad solution for everyday driving. Part number 4000-1658-00 is specified for front brake applications on the listed Mitsubishi i-MiEV model years.
Original: $35.76
-65%$35.76
$12.52Description
DFC 4000 HybriDynamic Brake Pads for Mitsubishi i-MiEV
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for front brake service on select Mitsubishi i-MiEV models. This disc brake pad set focuses on consistent pedal feel, predictable brake response, low dust, and reduced noise for everyday driving.
Compatible with 2012, 2014, and 2016-2017 Mitsubishi i-MiEV front brake applications, part number 4000-1658-00 is a direct-fit disc brake pad set for drivers looking for a balanced hybrid friction material.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for daily use
- Integrally molded friction material attachment
- Pad quantity: 4
- Prepared for pad wear sensor use
- Front disc brake pad set for Mitsubishi i-MiEV applications
- Part number 4000-1658-00
DFC HybriDynamic Brake Pad Line
The DFC 4000 HybriDynamic Brake Pad line is positioned as a value-focused brake pad family that simplifies material selection by using a hybrid formulation. For Mitsubishi i-MiEV owners, this means a front pad set that aims to deliver steady pedal response and dependable stopping performance without adding unnecessary brake dust or noise.
Detailed Description
These Dynamite Friction brake pads measure 108.5 mm wide, 42.9 mm high, and 14.7 mm thick for both inner and outer pads. The set is prepared for a mechanical pad wear sensor, while the sensor itself is not included. Mounting hardware is not included. If you are replacing the front brake pads on a 2012, 2014, or 2016-2017 Mitsubishi i-MiEV, part number 4000-1658-00 provides the correct fitment listed for those vehicles.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part Can Address
- Worn front brake pads on a Mitsubishi i-MiEV
- Brake noise during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel from aged pads
- Reduced braking response caused by pad wear
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Because the pads are prepared for a mechanical wear sensor, confirm whether your vehicle uses that setup before reassembly. Replace pads in axle pairs and inspect the braking system for wear, contamination, or uneven contact surfaces during service.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a consistent, value-oriented brake pad solution for everyday driving. Part number 4000-1658-00 is specified for front brake applications on the listed Mitsubishi i-MiEV model years.
