Dynamite Friction 4000-1649-01 Disc Brake Pad Set - Front
Front Brake Pads for Nissan and INFINITI
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads and Hardware Kit, part number 4000-1649-01, is a front disc brake pad set built for consistent pedal feel and predictable brake response. It is a practical choice for daily driving on the Nissan Murano, Nissan Pathfinder, INFINITI QX60, and INFINITI JX35.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for everyday use
- Integrally molded friction material attachment
- Four-pad set for the front axle
- Mounting hardware included
- Prepared for a mechanical pad wear sensor
- Outer and inner pad dimensions: 165.4 mm wide, 59.9 mm high, 15.8 mm thick
DFC 4000 HybriDynamic Line
The DFC 4000 HybriDynamic brake pad line focuses on a consistent brake pedal feel and steady response without requiring a complicated material choice. For drivers who want a front brake pad set that balances stopping performance, noise control, and dust management, the 4000 series is positioned as a straightforward replacement option.
Detailed Description
Part number 4000-1649-01 uses a hybrid friction material composition and integrally molded attachment for stable pad construction. The pad set includes four pads and mounting hardware, and it is prepared for a mechanical wear sensor setup while not including a pad wear sensor. This front disc brake pad set is compatible with 2015-2024 Nissan Murano, front; 2013-2021 Nissan Pathfinder, front; 2014-2020 INFINITI QX60, front; and 2013 INFINITI JX35, front. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Worn front brake pads on listed Nissan and INFINITI models
- Front brake service needs on vehicles with mechanical wear sensor preparation
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Replace pads in axle pairs and confirm the vehicle’s wear sensor arrangement matches the prepared-for-sensor design. Clean the caliper bracket and contact points, then install the included hardware during service. After installation, follow the vehicle manufacturer’s bedding procedure for new brake pads.
Quality Assurance
Dynamite Friction’s HybriDynamic formulation is engineered for steady braking response, low dust output, and reduced noise in daily driving conditions. The part number 4000-1649-01 is built as a front brake pad replacement for the listed Nissan and INFINITI applications.
Front Brake Pads for Nissan and INFINITI
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads and Hardware Kit, part number 4000-1649-01, is a front disc brake pad set built for consistent pedal feel and predictable brake response. It is a practical choice for daily driving on the Nissan Murano, Nissan Pathfinder, INFINITI QX60, and INFINITI JX35.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for everyday use
- Integrally molded friction material attachment
- Four-pad set for the front axle
- Mounting hardware included
- Prepared for a mechanical pad wear sensor
- Outer and inner pad dimensions: 165.4 mm wide, 59.9 mm high, 15.8 mm thick
DFC 4000 HybriDynamic Line
The DFC 4000 HybriDynamic brake pad line focuses on a consistent brake pedal feel and steady response without requiring a complicated material choice. For drivers who want a front brake pad set that balances stopping performance, noise control, and dust management, the 4000 series is positioned as a straightforward replacement option.
Detailed Description
Part number 4000-1649-01 uses a hybrid friction material composition and integrally molded attachment for stable pad construction. The pad set includes four pads and mounting hardware, and it is prepared for a mechanical wear sensor setup while not including a pad wear sensor. This front disc brake pad set is compatible with 2015-2024 Nissan Murano, front; 2013-2021 Nissan Pathfinder, front; 2014-2020 INFINITI QX60, front; and 2013 INFINITI JX35, front. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Worn front brake pads on listed Nissan and INFINITI models
- Front brake service needs on vehicles with mechanical wear sensor preparation
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Replace pads in axle pairs and confirm the vehicle’s wear sensor arrangement matches the prepared-for-sensor design. Clean the caliper bracket and contact points, then install the included hardware during service. After installation, follow the vehicle manufacturer’s bedding procedure for new brake pads.
Quality Assurance
Dynamite Friction’s HybriDynamic formulation is engineered for steady braking response, low dust output, and reduced noise in daily driving conditions. The part number 4000-1649-01 is built as a front brake pad replacement for the listed Nissan and INFINITI applications.
Original: $56.83
-65%$56.83
$19.89Description
Front Brake Pads for Nissan and INFINITI
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads and Hardware Kit, part number 4000-1649-01, is a front disc brake pad set built for consistent pedal feel and predictable brake response. It is a practical choice for daily driving on the Nissan Murano, Nissan Pathfinder, INFINITI QX60, and INFINITI JX35.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for everyday use
- Integrally molded friction material attachment
- Four-pad set for the front axle
- Mounting hardware included
- Prepared for a mechanical pad wear sensor
- Outer and inner pad dimensions: 165.4 mm wide, 59.9 mm high, 15.8 mm thick
DFC 4000 HybriDynamic Line
The DFC 4000 HybriDynamic brake pad line focuses on a consistent brake pedal feel and steady response without requiring a complicated material choice. For drivers who want a front brake pad set that balances stopping performance, noise control, and dust management, the 4000 series is positioned as a straightforward replacement option.
Detailed Description
Part number 4000-1649-01 uses a hybrid friction material composition and integrally molded attachment for stable pad construction. The pad set includes four pads and mounting hardware, and it is prepared for a mechanical wear sensor setup while not including a pad wear sensor. This front disc brake pad set is compatible with 2015-2024 Nissan Murano, front; 2013-2021 Nissan Pathfinder, front; 2014-2020 INFINITI QX60, front; and 2013 INFINITI JX35, front. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Worn front brake pads on listed Nissan and INFINITI models
- Front brake service needs on vehicles with mechanical wear sensor preparation
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. Replace pads in axle pairs and confirm the vehicle’s wear sensor arrangement matches the prepared-for-sensor design. Clean the caliper bracket and contact points, then install the included hardware during service. After installation, follow the vehicle manufacturer’s bedding procedure for new brake pads.
Quality Assurance
Dynamite Friction’s HybriDynamic formulation is engineered for steady braking response, low dust output, and reduced noise in daily driving conditions. The part number 4000-1649-01 is built as a front brake pad replacement for the listed Nissan and INFINITI applications.
