Dynamite Friction 4000-1634-00 Disc Brake Pad Set - Front
DFC 4000 HybriDynamic Brake Pads for Mercedes-Benz
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and responsive braking for daily driving. This front disc brake pad set is built for select Mercedes-Benz models and balances low dust, low noise, and dependable stopping performance.
The DFC 4000 HybriDynamic Brake Pads line focuses on straightforward OE-style replacement value with a hybrid friction material that helps simplify pad selection. Part number 4000-1634-00 is a front brake pad set for Mercedes-Benz CLS550, CL550, E550, S550, SLK55 AMG, and SLC43 AMG applications listed below.
Key Features
- Hybrid friction material for balanced braking response
- Consistent pedal feel for everyday street use
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for electronic pad wear sensor use
- Pad wear sensor not included
- Mounting hardware not included
Detailed Product Overview
DFC 4000 HybriDynamic Brake Pads, part number 4000-1634-00, are engineered as a front disc brake pad set with a hybrid friction compound. The pad dimensions measure 153.9 mm wide, 93 mm high, and 17 mm thick, with the same sizing for inner and outer pads. This helps support proper fitment on the listed Mercedes-Benz front brake applications while maintaining a consistent brake feel during normal driving.
Compatible With 2017-2020 Mercedes-Benz SLC43 AMG, front; 2012-2018 Mercedes-Benz CLS550, front; 2012-2016 Mercedes-Benz SLK55 AMG, front; 2010-2014 Mercedes-Benz CL550, front; 2012-2014 Mercedes-Benz E550, front; and 2012-2013 Mercedes-Benz S550, front. Required sensor: 341-63004 (1).
What This Brake Pad Set Helps Address
- Brake noise during routine street driving
- Excessive brake dust buildup on wheels
- Uneven or inconsistent pedal response
- Front brake pad wear on Mercedes-Benz performance and luxury models
- Need for a direct front pad replacement with sensor preparation
Installation Notes and Tips
Verify front axle fitment before installation and confirm the required wear sensor part number 341-63004 if your vehicle uses electronic pad wear monitoring. Inspect rotors, calipers, and pad contact surfaces before installing new pads, and replace worn components as needed to support even bedding and braking performance. Because mounting hardware is not included, reuse only serviceable hardware or source the correct hardware separately if required by your repair procedure.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad solution with consistent response, low dust, and low noise characteristics for daily driving. Part number 4000-1634-00 is built for the listed Mercedes-Benz front applications and follows the specified pad dimensions and sensor preparation requirements.
DFC 4000 HybriDynamic Brake Pads for Mercedes-Benz
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and responsive braking for daily driving. This front disc brake pad set is built for select Mercedes-Benz models and balances low dust, low noise, and dependable stopping performance.
The DFC 4000 HybriDynamic Brake Pads line focuses on straightforward OE-style replacement value with a hybrid friction material that helps simplify pad selection. Part number 4000-1634-00 is a front brake pad set for Mercedes-Benz CLS550, CL550, E550, S550, SLK55 AMG, and SLC43 AMG applications listed below.
Key Features
- Hybrid friction material for balanced braking response
- Consistent pedal feel for everyday street use
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for electronic pad wear sensor use
- Pad wear sensor not included
- Mounting hardware not included
Detailed Product Overview
DFC 4000 HybriDynamic Brake Pads, part number 4000-1634-00, are engineered as a front disc brake pad set with a hybrid friction compound. The pad dimensions measure 153.9 mm wide, 93 mm high, and 17 mm thick, with the same sizing for inner and outer pads. This helps support proper fitment on the listed Mercedes-Benz front brake applications while maintaining a consistent brake feel during normal driving.
Compatible With 2017-2020 Mercedes-Benz SLC43 AMG, front; 2012-2018 Mercedes-Benz CLS550, front; 2012-2016 Mercedes-Benz SLK55 AMG, front; 2010-2014 Mercedes-Benz CL550, front; 2012-2014 Mercedes-Benz E550, front; and 2012-2013 Mercedes-Benz S550, front. Required sensor: 341-63004 (1).
What This Brake Pad Set Helps Address
- Brake noise during routine street driving
- Excessive brake dust buildup on wheels
- Uneven or inconsistent pedal response
- Front brake pad wear on Mercedes-Benz performance and luxury models
- Need for a direct front pad replacement with sensor preparation
Installation Notes and Tips
Verify front axle fitment before installation and confirm the required wear sensor part number 341-63004 if your vehicle uses electronic pad wear monitoring. Inspect rotors, calipers, and pad contact surfaces before installing new pads, and replace worn components as needed to support even bedding and braking performance. Because mounting hardware is not included, reuse only serviceable hardware or source the correct hardware separately if required by your repair procedure.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad solution with consistent response, low dust, and low noise characteristics for daily driving. Part number 4000-1634-00 is built for the listed Mercedes-Benz front applications and follows the specified pad dimensions and sensor preparation requirements.
Original: $59.55
-65%$59.55
$20.84Description
DFC 4000 HybriDynamic Brake Pads for Mercedes-Benz
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and responsive braking for daily driving. This front disc brake pad set is built for select Mercedes-Benz models and balances low dust, low noise, and dependable stopping performance.
The DFC 4000 HybriDynamic Brake Pads line focuses on straightforward OE-style replacement value with a hybrid friction material that helps simplify pad selection. Part number 4000-1634-00 is a front brake pad set for Mercedes-Benz CLS550, CL550, E550, S550, SLK55 AMG, and SLC43 AMG applications listed below.
Key Features
- Hybrid friction material for balanced braking response
- Consistent pedal feel for everyday street use
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for electronic pad wear sensor use
- Pad wear sensor not included
- Mounting hardware not included
Detailed Product Overview
DFC 4000 HybriDynamic Brake Pads, part number 4000-1634-00, are engineered as a front disc brake pad set with a hybrid friction compound. The pad dimensions measure 153.9 mm wide, 93 mm high, and 17 mm thick, with the same sizing for inner and outer pads. This helps support proper fitment on the listed Mercedes-Benz front brake applications while maintaining a consistent brake feel during normal driving.
Compatible With 2017-2020 Mercedes-Benz SLC43 AMG, front; 2012-2018 Mercedes-Benz CLS550, front; 2012-2016 Mercedes-Benz SLK55 AMG, front; 2010-2014 Mercedes-Benz CL550, front; 2012-2014 Mercedes-Benz E550, front; and 2012-2013 Mercedes-Benz S550, front. Required sensor: 341-63004 (1).
What This Brake Pad Set Helps Address
- Brake noise during routine street driving
- Excessive brake dust buildup on wheels
- Uneven or inconsistent pedal response
- Front brake pad wear on Mercedes-Benz performance and luxury models
- Need for a direct front pad replacement with sensor preparation
Installation Notes and Tips
Verify front axle fitment before installation and confirm the required wear sensor part number 341-63004 if your vehicle uses electronic pad wear monitoring. Inspect rotors, calipers, and pad contact surfaces before installing new pads, and replace worn components as needed to support even bedding and braking performance. Because mounting hardware is not included, reuse only serviceable hardware or source the correct hardware separately if required by your repair procedure.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad solution with consistent response, low dust, and low noise characteristics for daily driving. Part number 4000-1634-00 is built for the listed Mercedes-Benz front applications and follows the specified pad dimensions and sensor preparation requirements.
