Dynamite Friction 4000-1633-00 Disc Brake Pad Set - Front
DFC 4000 HybriDynamic Front Brake Pads
The Dynamite Friction DFC 4000 HybriDynamic Brake Pad Set is built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This front disc brake pad set uses a hybrid friction material and is shaped for select Audi Q3, Audi S3, Volkswagen GTI, Volkswagen Golf R, Volkswagen Jetta GLI, Volkswagen Tiguan, and Volkswagen CC applications.
The DFC 4000 HybriDynamic Brake Pads, part number 4000-1633-00, are a practical OE-style replacement for front brake service where consistent stopping performance and clean operation matter. The pad design is integrally molded, prepared for an electronic pad wear sensor, and sized at 175.3 mm wide, 70.4 mm high, and 18.8 mm thick.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Front disc brake pad set with 4 pads included
- Prepared for electronic pad wear sensor applications
- Integrally molded friction material attachment
- Pad dimensions: 175.3 mm width, 70.4 mm height, 18.8 mm thickness
- Part number 4000-1633-00 for easy identification
Product Details
Dynamite Friction’s DFC 4000 HybriDynamic line focuses on predictable pedal feel and dependable brake response without forcing you to guess at pad material selection. This front brake pad set is engineered for everyday street use, with a hybrid compound that balances stopping performance, noise control, and dust management. It is a direct-fit option for vehicles such as the 2020-2025 Audi Q3 front, 2019-2020 Audi S3 front, 2019-2021 Volkswagen GTI front, 2015-2019 Volkswagen Golf R front, and 2018-2024 Volkswagen Tiguan front. The part number 4000-1633-00 is also listed for 2019-2020 Volkswagen Jetta GLI front and 2014 Volkswagen CC front applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Worn front brake pads that reduce stopping performance
- Brake noise during normal street driving
- Excessive brake dust buildup on wheels
- Inconsistent pedal feel from aging pad material
- Need for a front pad replacement on select Audi and Volkswagen models
Installation Notes and Tips
Confirm front axle fitment before ordering, since this pad set is specific to front applications only. Some vehicles require additional hardware, such as the listed requirement for the 2020-2025 Audi Q3 front application, so verify the brake system configuration before installation. Inspect rotors, calipers, and wear sensors during service, and replace any damaged components as needed. The pads are prepared for an electronic wear sensor, but a sensor is not included.
Quality Assurance
The DFC 4000 HybriDynamic brake pad formulation is built to deliver consistent braking behavior, low dust, and low noise for daily driving. Part number 4000-1633-00 is manufactured for the specified front fitments and sized to match the listed applications for proper brake service.
DFC 4000 HybriDynamic Front Brake Pads
The Dynamite Friction DFC 4000 HybriDynamic Brake Pad Set is built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This front disc brake pad set uses a hybrid friction material and is shaped for select Audi Q3, Audi S3, Volkswagen GTI, Volkswagen Golf R, Volkswagen Jetta GLI, Volkswagen Tiguan, and Volkswagen CC applications.
The DFC 4000 HybriDynamic Brake Pads, part number 4000-1633-00, are a practical OE-style replacement for front brake service where consistent stopping performance and clean operation matter. The pad design is integrally molded, prepared for an electronic pad wear sensor, and sized at 175.3 mm wide, 70.4 mm high, and 18.8 mm thick.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Front disc brake pad set with 4 pads included
- Prepared for electronic pad wear sensor applications
- Integrally molded friction material attachment
- Pad dimensions: 175.3 mm width, 70.4 mm height, 18.8 mm thickness
- Part number 4000-1633-00 for easy identification
Product Details
Dynamite Friction’s DFC 4000 HybriDynamic line focuses on predictable pedal feel and dependable brake response without forcing you to guess at pad material selection. This front brake pad set is engineered for everyday street use, with a hybrid compound that balances stopping performance, noise control, and dust management. It is a direct-fit option for vehicles such as the 2020-2025 Audi Q3 front, 2019-2020 Audi S3 front, 2019-2021 Volkswagen GTI front, 2015-2019 Volkswagen Golf R front, and 2018-2024 Volkswagen Tiguan front. The part number 4000-1633-00 is also listed for 2019-2020 Volkswagen Jetta GLI front and 2014 Volkswagen CC front applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Worn front brake pads that reduce stopping performance
- Brake noise during normal street driving
- Excessive brake dust buildup on wheels
- Inconsistent pedal feel from aging pad material
- Need for a front pad replacement on select Audi and Volkswagen models
Installation Notes and Tips
Confirm front axle fitment before ordering, since this pad set is specific to front applications only. Some vehicles require additional hardware, such as the listed requirement for the 2020-2025 Audi Q3 front application, so verify the brake system configuration before installation. Inspect rotors, calipers, and wear sensors during service, and replace any damaged components as needed. The pads are prepared for an electronic wear sensor, but a sensor is not included.
Quality Assurance
The DFC 4000 HybriDynamic brake pad formulation is built to deliver consistent braking behavior, low dust, and low noise for daily driving. Part number 4000-1633-00 is manufactured for the specified front fitments and sized to match the listed applications for proper brake service.
Original: $55.39
-65%$55.39
$19.39Description
DFC 4000 HybriDynamic Front Brake Pads
The Dynamite Friction DFC 4000 HybriDynamic Brake Pad Set is built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This front disc brake pad set uses a hybrid friction material and is shaped for select Audi Q3, Audi S3, Volkswagen GTI, Volkswagen Golf R, Volkswagen Jetta GLI, Volkswagen Tiguan, and Volkswagen CC applications.
The DFC 4000 HybriDynamic Brake Pads, part number 4000-1633-00, are a practical OE-style replacement for front brake service where consistent stopping performance and clean operation matter. The pad design is integrally molded, prepared for an electronic pad wear sensor, and sized at 175.3 mm wide, 70.4 mm high, and 18.8 mm thick.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Front disc brake pad set with 4 pads included
- Prepared for electronic pad wear sensor applications
- Integrally molded friction material attachment
- Pad dimensions: 175.3 mm width, 70.4 mm height, 18.8 mm thickness
- Part number 4000-1633-00 for easy identification
Product Details
Dynamite Friction’s DFC 4000 HybriDynamic line focuses on predictable pedal feel and dependable brake response without forcing you to guess at pad material selection. This front brake pad set is engineered for everyday street use, with a hybrid compound that balances stopping performance, noise control, and dust management. It is a direct-fit option for vehicles such as the 2020-2025 Audi Q3 front, 2019-2020 Audi S3 front, 2019-2021 Volkswagen GTI front, 2015-2019 Volkswagen Golf R front, and 2018-2024 Volkswagen Tiguan front. The part number 4000-1633-00 is also listed for 2019-2020 Volkswagen Jetta GLI front and 2014 Volkswagen CC front applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Worn front brake pads that reduce stopping performance
- Brake noise during normal street driving
- Excessive brake dust buildup on wheels
- Inconsistent pedal feel from aging pad material
- Need for a front pad replacement on select Audi and Volkswagen models
Installation Notes and Tips
Confirm front axle fitment before ordering, since this pad set is specific to front applications only. Some vehicles require additional hardware, such as the listed requirement for the 2020-2025 Audi Q3 front application, so verify the brake system configuration before installation. Inspect rotors, calipers, and wear sensors during service, and replace any damaged components as needed. The pads are prepared for an electronic wear sensor, but a sensor is not included.
Quality Assurance
The DFC 4000 HybriDynamic brake pad formulation is built to deliver consistent braking behavior, low dust, and low noise for daily driving. Part number 4000-1633-00 is manufactured for the specified front fitments and sized to match the listed applications for proper brake service.
