Dynamite Friction 4000-1609-00 Disc Brake Pad Set - Front
DFC 4000 Front Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel, responsive braking, and everyday drivability for a wide range of BMW front brake applications. The hybrid friction material is built for balanced stopping performance with low dust and low noise characteristics, making this DFC 4000 HybriDynamic Brake Pads set a practical choice for daily use.
Key Features
- Hybrid friction material for balanced brake response
- Consistent pedal feel for predictable braking
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for an electronic pad wear sensor
- Pad size: 112.8 mm wide, 91.7 mm high, 16.9 mm thick
Product Details
The DFC 4000 HybriDynamic Brake Pads line is focused on straightforward material selection and dependable street performance. Part number 4000-1609-00 uses a hybrid friction compound to deliver stable brake response without adding unnecessary noise or dust. For BMW drivers, that means a front brake pad set that supports everyday commuting, highway driving, and routine stop-and-go traffic with a consistent feel at the pedal. This part number, 4000-1609-00, is built as a direct front disc brake pad set for the listed BMW applications.
Compatible With BMW 230i, 230i xDrive, M240i, M240i xDrive, 430i, 430i Gran Coupe, 430i xDrive, 430i xDrive Gran Coupe, 440i, 440i Gran Coupe, 440i xDrive, 440i xDrive Gran Coupe, M4, 340i GT xDrive, 120i, 320i, 328d xDrive, 330i, 330i xDrive, 340i, 340i xDrive, M140i, M2, M3, 228i, 228i xDrive, 328i, 328i xDrive, 335i GT xDrive, 428i, 428i Gran Coupe, 428i xDrive, 428i xDrive Gran Coupe, 435i, 435i Gran Coupe, 435i xDrive, 435i xDrive Gran Coupe, M135i, M235i, M235i xDrive, 118i, 335i, 335i xDrive, and ActiveHybrid 3 front brake service.
Common Problems It Can Address
- Brake noise during normal street driving
- Excessive brake dust on front wheels
- Uneven or inconsistent pedal feel
- Worn front pads requiring replacement
- Electronic wear sensor service on supported BMW applications
Installation Notes
Install on the front axle only and verify rotor condition, caliper operation, and pad fitment before assembly. This set is prepared for an electronic wear sensor, and the required sensor for many listed BMW applications is 341-31069 (1). Mounting hardware is not included. Always confirm the vehicle’s brake configuration against the fitment list before ordering.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad family with consistent response and everyday refinement. Part number 4000-1609-00 is engineered for front brake service on the listed BMW models with attention to pedal feel, noise control, and dust management.
DFC 4000 Front Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel, responsive braking, and everyday drivability for a wide range of BMW front brake applications. The hybrid friction material is built for balanced stopping performance with low dust and low noise characteristics, making this DFC 4000 HybriDynamic Brake Pads set a practical choice for daily use.
Key Features
- Hybrid friction material for balanced brake response
- Consistent pedal feel for predictable braking
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for an electronic pad wear sensor
- Pad size: 112.8 mm wide, 91.7 mm high, 16.9 mm thick
Product Details
The DFC 4000 HybriDynamic Brake Pads line is focused on straightforward material selection and dependable street performance. Part number 4000-1609-00 uses a hybrid friction compound to deliver stable brake response without adding unnecessary noise or dust. For BMW drivers, that means a front brake pad set that supports everyday commuting, highway driving, and routine stop-and-go traffic with a consistent feel at the pedal. This part number, 4000-1609-00, is built as a direct front disc brake pad set for the listed BMW applications.
Compatible With BMW 230i, 230i xDrive, M240i, M240i xDrive, 430i, 430i Gran Coupe, 430i xDrive, 430i xDrive Gran Coupe, 440i, 440i Gran Coupe, 440i xDrive, 440i xDrive Gran Coupe, M4, 340i GT xDrive, 120i, 320i, 328d xDrive, 330i, 330i xDrive, 340i, 340i xDrive, M140i, M2, M3, 228i, 228i xDrive, 328i, 328i xDrive, 335i GT xDrive, 428i, 428i Gran Coupe, 428i xDrive, 428i xDrive Gran Coupe, 435i, 435i Gran Coupe, 435i xDrive, 435i xDrive Gran Coupe, M135i, M235i, M235i xDrive, 118i, 335i, 335i xDrive, and ActiveHybrid 3 front brake service.
Common Problems It Can Address
- Brake noise during normal street driving
- Excessive brake dust on front wheels
- Uneven or inconsistent pedal feel
- Worn front pads requiring replacement
- Electronic wear sensor service on supported BMW applications
Installation Notes
Install on the front axle only and verify rotor condition, caliper operation, and pad fitment before assembly. This set is prepared for an electronic wear sensor, and the required sensor for many listed BMW applications is 341-31069 (1). Mounting hardware is not included. Always confirm the vehicle’s brake configuration against the fitment list before ordering.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad family with consistent response and everyday refinement. Part number 4000-1609-00 is engineered for front brake service on the listed BMW models with attention to pedal feel, noise control, and dust management.
Original: $60.77
-65%$60.77
$21.27Description
DFC 4000 Front Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel, responsive braking, and everyday drivability for a wide range of BMW front brake applications. The hybrid friction material is built for balanced stopping performance with low dust and low noise characteristics, making this DFC 4000 HybriDynamic Brake Pads set a practical choice for daily use.
Key Features
- Hybrid friction material for balanced brake response
- Consistent pedal feel for predictable braking
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for an electronic pad wear sensor
- Pad size: 112.8 mm wide, 91.7 mm high, 16.9 mm thick
Product Details
The DFC 4000 HybriDynamic Brake Pads line is focused on straightforward material selection and dependable street performance. Part number 4000-1609-00 uses a hybrid friction compound to deliver stable brake response without adding unnecessary noise or dust. For BMW drivers, that means a front brake pad set that supports everyday commuting, highway driving, and routine stop-and-go traffic with a consistent feel at the pedal. This part number, 4000-1609-00, is built as a direct front disc brake pad set for the listed BMW applications.
Compatible With BMW 230i, 230i xDrive, M240i, M240i xDrive, 430i, 430i Gran Coupe, 430i xDrive, 430i xDrive Gran Coupe, 440i, 440i Gran Coupe, 440i xDrive, 440i xDrive Gran Coupe, M4, 340i GT xDrive, 120i, 320i, 328d xDrive, 330i, 330i xDrive, 340i, 340i xDrive, M140i, M2, M3, 228i, 228i xDrive, 328i, 328i xDrive, 335i GT xDrive, 428i, 428i Gran Coupe, 428i xDrive, 428i xDrive Gran Coupe, 435i, 435i Gran Coupe, 435i xDrive, 435i xDrive Gran Coupe, M135i, M235i, M235i xDrive, 118i, 335i, 335i xDrive, and ActiveHybrid 3 front brake service.
Common Problems It Can Address
- Brake noise during normal street driving
- Excessive brake dust on front wheels
- Uneven or inconsistent pedal feel
- Worn front pads requiring replacement
- Electronic wear sensor service on supported BMW applications
Installation Notes
Install on the front axle only and verify rotor condition, caliper operation, and pad fitment before assembly. This set is prepared for an electronic wear sensor, and the required sensor for many listed BMW applications is 341-31069 (1). Mounting hardware is not included. Always confirm the vehicle’s brake configuration against the fitment list before ordering.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad family with consistent response and everyday refinement. Part number 4000-1609-00 is engineered for front brake service on the listed BMW models with attention to pedal feel, noise control, and dust management.
