Dynamite Friction 4000-1274-01 Disc Brake Pad Set - Rear
Rear Brake Pads for Jeep Wrangler and Liberty
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads and Hardware Kit delivers consistent pedal feel, responsive braking, and low-dust, low-noise operation for everyday driving. This rear disc brake pad set is built for drivers who want dependable stopping performance without sacrificing comfort.
Part number 4000-1274-01 is a rear brake pad solution for select Jeep Wrangler, Jeep Wrangler JK, Jeep Liberty, and Dodge Nitro applications. It combines a hybrid friction material with integrally molded pad construction for steady brake response and predictable wear characteristics.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for daily use
- Rear disc brake pad set with 4 pads
- Mounting hardware included
- Prepared for a mechanical pad wear sensor
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 45.5 mm height, 116.6 mm width, 16 mm thickness
Product Details
The DFC 4000 HybriDynamic Brake Pad and Hardware Kit is engineered to provide a consistent pedal feel and reliable brake response across a range of rear brake applications. The hybrid friction compound is selected to balance stopping performance with quieter operation and reduced brake dust, making it a practical choice for drivers who want a clean, controlled feel in normal street use. Part number 4000-1274-01 is listed for rear fitment on 2007-2017 Jeep Wrangler, 2008-2012 Jeep Liberty, and 2007-2011 Dodge Nitro, plus 2018 Jeep Wrangler and 2018 Jeep Wrangler JK rear applications with the noted front disc configurations.
For shoppers searching for rear brake pads for 2007-2017 Jeep Wrangler, rear brake pads for 2008-2012 Jeep Liberty, or rear brake pads for 2007-2011 Dodge Nitro, this DFC 4000 HybriDynamic set provides a direct-fit option with hardware included. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Brake noise during everyday driving
- Excessive brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Reduced rear brake response from worn pads
- Need for a rear pad and hardware refresh during brake service
Installation Notes and Tips
Confirm rear axle application and verify the listed vehicle notes before installation, especially on 2018 Jeep Wrangler and 2018 Jeep Wrangler JK models with specific front disc configurations. Inspect rotors, calipers, and pad contact surfaces before fitting the new pads. Replace worn hardware only after confirming caliper condition and sensor preparation requirements. Follow factory torque specifications and bedding procedures after installation.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad family built for consistent response, low dust, and low noise in daily driving conditions. Part number 4000-1274-01 is manufactured as a rear disc brake pad set with hardware included and specifications listed for direct application matching.
Rear Brake Pads for Jeep Wrangler and Liberty
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads and Hardware Kit delivers consistent pedal feel, responsive braking, and low-dust, low-noise operation for everyday driving. This rear disc brake pad set is built for drivers who want dependable stopping performance without sacrificing comfort.
Part number 4000-1274-01 is a rear brake pad solution for select Jeep Wrangler, Jeep Wrangler JK, Jeep Liberty, and Dodge Nitro applications. It combines a hybrid friction material with integrally molded pad construction for steady brake response and predictable wear characteristics.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for daily use
- Rear disc brake pad set with 4 pads
- Mounting hardware included
- Prepared for a mechanical pad wear sensor
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 45.5 mm height, 116.6 mm width, 16 mm thickness
Product Details
The DFC 4000 HybriDynamic Brake Pad and Hardware Kit is engineered to provide a consistent pedal feel and reliable brake response across a range of rear brake applications. The hybrid friction compound is selected to balance stopping performance with quieter operation and reduced brake dust, making it a practical choice for drivers who want a clean, controlled feel in normal street use. Part number 4000-1274-01 is listed for rear fitment on 2007-2017 Jeep Wrangler, 2008-2012 Jeep Liberty, and 2007-2011 Dodge Nitro, plus 2018 Jeep Wrangler and 2018 Jeep Wrangler JK rear applications with the noted front disc configurations.
For shoppers searching for rear brake pads for 2007-2017 Jeep Wrangler, rear brake pads for 2008-2012 Jeep Liberty, or rear brake pads for 2007-2011 Dodge Nitro, this DFC 4000 HybriDynamic set provides a direct-fit option with hardware included. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Brake noise during everyday driving
- Excessive brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Reduced rear brake response from worn pads
- Need for a rear pad and hardware refresh during brake service
Installation Notes and Tips
Confirm rear axle application and verify the listed vehicle notes before installation, especially on 2018 Jeep Wrangler and 2018 Jeep Wrangler JK models with specific front disc configurations. Inspect rotors, calipers, and pad contact surfaces before fitting the new pads. Replace worn hardware only after confirming caliper condition and sensor preparation requirements. Follow factory torque specifications and bedding procedures after installation.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad family built for consistent response, low dust, and low noise in daily driving conditions. Part number 4000-1274-01 is manufactured as a rear disc brake pad set with hardware included and specifications listed for direct application matching.
Original: $40.12
-65%$40.12
$14.04Description
Rear Brake Pads for Jeep Wrangler and Liberty
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads and Hardware Kit delivers consistent pedal feel, responsive braking, and low-dust, low-noise operation for everyday driving. This rear disc brake pad set is built for drivers who want dependable stopping performance without sacrificing comfort.
Part number 4000-1274-01 is a rear brake pad solution for select Jeep Wrangler, Jeep Wrangler JK, Jeep Liberty, and Dodge Nitro applications. It combines a hybrid friction material with integrally molded pad construction for steady brake response and predictable wear characteristics.
Key Features
- Hybrid friction material for balanced braking performance
- Low dust and low noise characteristics for daily use
- Rear disc brake pad set with 4 pads
- Mounting hardware included
- Prepared for a mechanical pad wear sensor
- Integrally molded friction material attachment
- Outer and inner pad dimensions: 45.5 mm height, 116.6 mm width, 16 mm thickness
Product Details
The DFC 4000 HybriDynamic Brake Pad and Hardware Kit is engineered to provide a consistent pedal feel and reliable brake response across a range of rear brake applications. The hybrid friction compound is selected to balance stopping performance with quieter operation and reduced brake dust, making it a practical choice for drivers who want a clean, controlled feel in normal street use. Part number 4000-1274-01 is listed for rear fitment on 2007-2017 Jeep Wrangler, 2008-2012 Jeep Liberty, and 2007-2011 Dodge Nitro, plus 2018 Jeep Wrangler and 2018 Jeep Wrangler JK rear applications with the noted front disc configurations.
For shoppers searching for rear brake pads for 2007-2017 Jeep Wrangler, rear brake pads for 2008-2012 Jeep Liberty, or rear brake pads for 2007-2011 Dodge Nitro, this DFC 4000 HybriDynamic set provides a direct-fit option with hardware included. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Brake noise during everyday driving
- Excessive brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Reduced rear brake response from worn pads
- Need for a rear pad and hardware refresh during brake service
Installation Notes and Tips
Confirm rear axle application and verify the listed vehicle notes before installation, especially on 2018 Jeep Wrangler and 2018 Jeep Wrangler JK models with specific front disc configurations. Inspect rotors, calipers, and pad contact surfaces before fitting the new pads. Replace worn hardware only after confirming caliper condition and sensor preparation requirements. Follow factory torque specifications and bedding procedures after installation.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad family built for consistent response, low dust, and low noise in daily driving conditions. Part number 4000-1274-01 is manufactured as a rear disc brake pad set with hardware included and specifications listed for direct application matching.
