Dynamite Friction 4000-1093-00 Disc Brake Pad Set - Rear
Rear Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are a rear disc brake pad set built for consistent pedal feel, predictable brake response, and everyday stopping performance. This set is a practical choice for drivers who want low dust and low noise characteristics without overcomplicating brake pad selection.
Compatible With 2005-2009 Chevrolet Uplander rear, 2006-2009 Pontiac Montana rear, 2005-2007 Buick Terraza rear, and 2005-2007 Saturn Relay rear. Part number 4000-1093-00 is also a direct reference point when matching the correct rear pad set for these applications.
Key Features
- DFC 4000 HybriDynamic brake pad formulation
- Hybrid friction material composition
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Low dust and low noise characteristics for street use
- Pad dimensions: 125 mm width, 51.6 mm height, 14.1 mm thickness
Product Line Details
The DFC 4000 HybriDynamic Brake Pads line focuses on balanced everyday braking performance. It is aimed at drivers who want a consistent pedal feel and dependable brake response while keeping dust and noise under control. Part number 4000-1093-00 follows that approach with a hybrid friction blend suited to routine commuting and general road use.
Detailed Description
These Dynamite Friction rear brake pads are engineered for vehicles that use a rear disc brake setup and a mechanical wear sensor arrangement. The pad set is prepared for a wear sensor, but no sensor is included, and mounting hardware is not included. With matching inner and outer pad dimensions and an integrally molded friction layer, this set is built for straightforward brake service on the listed Chevrolet, Pontiac, Buick, and Saturn models.
Part number 4000-1093-00 is a fitment-specific rear pad set for 2005-2009 Chevrolet Uplander, 2006-2009 Pontiac Montana, 2005-2007 Buick Terraza, and 2005-2007 Saturn Relay. It is a practical option when replacing worn rear pads and restoring stable braking feel on daily-driven vehicles.
Common Issues This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise from pads near the end of service life
- Excess brake dust from older pad material
- Uneven or inconsistent pedal feel during normal braking
- Rear brake service needs on Chevrolet Uplander, Pontiac Montana, Buick Terraza, or Saturn Relay models
Installation Notes and Tips
Confirm rear fitment by year, make, model, and brake configuration before ordering. Inspect rotors, caliper condition, and sensor wiring during service, and replace worn components as needed. Since mounting hardware is not included, reuse only serviceable hardware or source the correct hardware separately if required by the vehicle.
For best results, clean the caliper bracket contact points, verify pad movement after installation, and follow the vehicle manufacturer’s brake bedding procedure. Part number 4000-1093-00 should be matched to the rear position only.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad option with consistent response, low dust, and low noise characteristics for everyday driving. This product is built to the listed dimensions and fitment applications for accurate brake service on the specified vehicles.
Rear Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are a rear disc brake pad set built for consistent pedal feel, predictable brake response, and everyday stopping performance. This set is a practical choice for drivers who want low dust and low noise characteristics without overcomplicating brake pad selection.
Compatible With 2005-2009 Chevrolet Uplander rear, 2006-2009 Pontiac Montana rear, 2005-2007 Buick Terraza rear, and 2005-2007 Saturn Relay rear. Part number 4000-1093-00 is also a direct reference point when matching the correct rear pad set for these applications.
Key Features
- DFC 4000 HybriDynamic brake pad formulation
- Hybrid friction material composition
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Low dust and low noise characteristics for street use
- Pad dimensions: 125 mm width, 51.6 mm height, 14.1 mm thickness
Product Line Details
The DFC 4000 HybriDynamic Brake Pads line focuses on balanced everyday braking performance. It is aimed at drivers who want a consistent pedal feel and dependable brake response while keeping dust and noise under control. Part number 4000-1093-00 follows that approach with a hybrid friction blend suited to routine commuting and general road use.
Detailed Description
These Dynamite Friction rear brake pads are engineered for vehicles that use a rear disc brake setup and a mechanical wear sensor arrangement. The pad set is prepared for a wear sensor, but no sensor is included, and mounting hardware is not included. With matching inner and outer pad dimensions and an integrally molded friction layer, this set is built for straightforward brake service on the listed Chevrolet, Pontiac, Buick, and Saturn models.
Part number 4000-1093-00 is a fitment-specific rear pad set for 2005-2009 Chevrolet Uplander, 2006-2009 Pontiac Montana, 2005-2007 Buick Terraza, and 2005-2007 Saturn Relay. It is a practical option when replacing worn rear pads and restoring stable braking feel on daily-driven vehicles.
Common Issues This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise from pads near the end of service life
- Excess brake dust from older pad material
- Uneven or inconsistent pedal feel during normal braking
- Rear brake service needs on Chevrolet Uplander, Pontiac Montana, Buick Terraza, or Saturn Relay models
Installation Notes and Tips
Confirm rear fitment by year, make, model, and brake configuration before ordering. Inspect rotors, caliper condition, and sensor wiring during service, and replace worn components as needed. Since mounting hardware is not included, reuse only serviceable hardware or source the correct hardware separately if required by the vehicle.
For best results, clean the caliper bracket contact points, verify pad movement after installation, and follow the vehicle manufacturer’s brake bedding procedure. Part number 4000-1093-00 should be matched to the rear position only.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad option with consistent response, low dust, and low noise characteristics for everyday driving. This product is built to the listed dimensions and fitment applications for accurate brake service on the specified vehicles.
Description
Rear Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are a rear disc brake pad set built for consistent pedal feel, predictable brake response, and everyday stopping performance. This set is a practical choice for drivers who want low dust and low noise characteristics without overcomplicating brake pad selection.
Compatible With 2005-2009 Chevrolet Uplander rear, 2006-2009 Pontiac Montana rear, 2005-2007 Buick Terraza rear, and 2005-2007 Saturn Relay rear. Part number 4000-1093-00 is also a direct reference point when matching the correct rear pad set for these applications.
Key Features
- DFC 4000 HybriDynamic brake pad formulation
- Hybrid friction material composition
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Low dust and low noise characteristics for street use
- Pad dimensions: 125 mm width, 51.6 mm height, 14.1 mm thickness
Product Line Details
The DFC 4000 HybriDynamic Brake Pads line focuses on balanced everyday braking performance. It is aimed at drivers who want a consistent pedal feel and dependable brake response while keeping dust and noise under control. Part number 4000-1093-00 follows that approach with a hybrid friction blend suited to routine commuting and general road use.
Detailed Description
These Dynamite Friction rear brake pads are engineered for vehicles that use a rear disc brake setup and a mechanical wear sensor arrangement. The pad set is prepared for a wear sensor, but no sensor is included, and mounting hardware is not included. With matching inner and outer pad dimensions and an integrally molded friction layer, this set is built for straightforward brake service on the listed Chevrolet, Pontiac, Buick, and Saturn models.
Part number 4000-1093-00 is a fitment-specific rear pad set for 2005-2009 Chevrolet Uplander, 2006-2009 Pontiac Montana, 2005-2007 Buick Terraza, and 2005-2007 Saturn Relay. It is a practical option when replacing worn rear pads and restoring stable braking feel on daily-driven vehicles.
Common Issues This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise from pads near the end of service life
- Excess brake dust from older pad material
- Uneven or inconsistent pedal feel during normal braking
- Rear brake service needs on Chevrolet Uplander, Pontiac Montana, Buick Terraza, or Saturn Relay models
Installation Notes and Tips
Confirm rear fitment by year, make, model, and brake configuration before ordering. Inspect rotors, caliper condition, and sensor wiring during service, and replace worn components as needed. Since mounting hardware is not included, reuse only serviceable hardware or source the correct hardware separately if required by the vehicle.
For best results, clean the caliper bracket contact points, verify pad movement after installation, and follow the vehicle manufacturer’s brake bedding procedure. Part number 4000-1093-00 should be matched to the rear position only.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad option with consistent response, low dust, and low noise characteristics for everyday driving. This product is built to the listed dimensions and fitment applications for accurate brake service on the specified vehicles.
