Dynamite Friction 4000-1066-10 Disc Brake Pad Set - Front
DFC 4000 HybriDynamic Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and low-noise operation in everyday use. This disc brake pad set uses a hybrid friction material and is shaped for a direct-service replacement on compatible applications.
For shoppers searching for brake pads for Honda Civic or Toyota Camry-style daily driving applications, the DFC 4000 HybriDynamic line focuses on balanced stopping performance and clean operation. Part number 4000-1066-10 is a four-pad set with integrally molded friction material and provisions for electronic pad wear sensing.
Key Features
- Brand: Dynamite Friction
- Brand line: DFC 4000 HybriDynamic Brake Pads
- Part number: 4000-1066-10
- Disc brake pad set with 4 pads
- Hybrid friction material for consistent brake response
- Low dust and low noise characteristics for daily driving
- Prepared for electronic pad wear sensor use
- Outer and inner pad dimensions: 64.8 mm height, 222 mm width, 20.3 mm thickness
- Integrally molded friction material attachment
About the DFC 4000 HybriDynamic Line
The DFC 4000 HybriDynamic brake pad line is positioned for drivers who want a straightforward brake pad choice without having to sort through multiple friction types. Its hybrid formulation is aimed at delivering stable pedal feel and dependable brake response while keeping dust and noise under control for routine commuting and stop-and-go traffic.
Detailed Description
Part number 4000-1066-10 is a front- or rear-service style disc brake pad set depending on the vehicle application. The pads measure 222 mm wide, 64.8 mm tall, and 20.3 mm thick, with matching inner and outer pad dimensions for consistent fitment on the correct caliper setup. This set is prepared for an electronic wear sensor, but no sensor is included, and mounting hardware is not included.
This brake pad set is a practical choice for drivers looking for replacement brake pads for Honda Civic, Toyota Camry, and similar passenger vehicles where quiet operation, controlled dust, and reliable everyday braking matter. If you are comparing DFC 4000 brake pads by part number, 4000-1066-10 is the reference to verify before ordering.
What This Brake Pad Set Helps Address
- Squealing or noisy braking during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel from worn pads
- Reduced braking response caused by pad wear
- Need for a direct replacement disc brake pad set with wear-sensor preparation
Installation Notes and Tips
Confirm vehicle fitment by matching the pad dimensions, caliper shape, and wear-sensor setup before installation. Part number 4000-1066-10 is prepared for an electronic pad wear sensor, so verify whether your vehicle uses that system and transfer or replace the sensor as required by the application. Inspect rotors, calipers, and slide hardware during service, and follow the vehicle manufacturer’s brake bedding procedure after installation.
Compatible With selected Honda Civic and Toyota Camry brake applications where the listed pad dimensions and sensor preparation match the original equipment setup. Use the part number 4000-1066-10 to confirm the correct brake pad set before purchase.
Quality Assurance
Dynamite Friction markets the DFC HybriDynamic formulation as a value-focused brake pad solution engineered for consistent response, low dust, and low noise in daily driving conditions. Verify all measurements and sensor requirements against the vehicle’s original brake configuration to ensure proper service replacement.
DFC 4000 HybriDynamic Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and low-noise operation in everyday use. This disc brake pad set uses a hybrid friction material and is shaped for a direct-service replacement on compatible applications.
For shoppers searching for brake pads for Honda Civic or Toyota Camry-style daily driving applications, the DFC 4000 HybriDynamic line focuses on balanced stopping performance and clean operation. Part number 4000-1066-10 is a four-pad set with integrally molded friction material and provisions for electronic pad wear sensing.
Key Features
- Brand: Dynamite Friction
- Brand line: DFC 4000 HybriDynamic Brake Pads
- Part number: 4000-1066-10
- Disc brake pad set with 4 pads
- Hybrid friction material for consistent brake response
- Low dust and low noise characteristics for daily driving
- Prepared for electronic pad wear sensor use
- Outer and inner pad dimensions: 64.8 mm height, 222 mm width, 20.3 mm thickness
- Integrally molded friction material attachment
About the DFC 4000 HybriDynamic Line
The DFC 4000 HybriDynamic brake pad line is positioned for drivers who want a straightforward brake pad choice without having to sort through multiple friction types. Its hybrid formulation is aimed at delivering stable pedal feel and dependable brake response while keeping dust and noise under control for routine commuting and stop-and-go traffic.
Detailed Description
Part number 4000-1066-10 is a front- or rear-service style disc brake pad set depending on the vehicle application. The pads measure 222 mm wide, 64.8 mm tall, and 20.3 mm thick, with matching inner and outer pad dimensions for consistent fitment on the correct caliper setup. This set is prepared for an electronic wear sensor, but no sensor is included, and mounting hardware is not included.
This brake pad set is a practical choice for drivers looking for replacement brake pads for Honda Civic, Toyota Camry, and similar passenger vehicles where quiet operation, controlled dust, and reliable everyday braking matter. If you are comparing DFC 4000 brake pads by part number, 4000-1066-10 is the reference to verify before ordering.
What This Brake Pad Set Helps Address
- Squealing or noisy braking during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel from worn pads
- Reduced braking response caused by pad wear
- Need for a direct replacement disc brake pad set with wear-sensor preparation
Installation Notes and Tips
Confirm vehicle fitment by matching the pad dimensions, caliper shape, and wear-sensor setup before installation. Part number 4000-1066-10 is prepared for an electronic pad wear sensor, so verify whether your vehicle uses that system and transfer or replace the sensor as required by the application. Inspect rotors, calipers, and slide hardware during service, and follow the vehicle manufacturer’s brake bedding procedure after installation.
Compatible With selected Honda Civic and Toyota Camry brake applications where the listed pad dimensions and sensor preparation match the original equipment setup. Use the part number 4000-1066-10 to confirm the correct brake pad set before purchase.
Quality Assurance
Dynamite Friction markets the DFC HybriDynamic formulation as a value-focused brake pad solution engineered for consistent response, low dust, and low noise in daily driving conditions. Verify all measurements and sensor requirements against the vehicle’s original brake configuration to ensure proper service replacement.
Original: $56.48
-65%$56.48
$19.77Description
DFC 4000 HybriDynamic Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and low-noise operation in everyday use. This disc brake pad set uses a hybrid friction material and is shaped for a direct-service replacement on compatible applications.
For shoppers searching for brake pads for Honda Civic or Toyota Camry-style daily driving applications, the DFC 4000 HybriDynamic line focuses on balanced stopping performance and clean operation. Part number 4000-1066-10 is a four-pad set with integrally molded friction material and provisions for electronic pad wear sensing.
Key Features
- Brand: Dynamite Friction
- Brand line: DFC 4000 HybriDynamic Brake Pads
- Part number: 4000-1066-10
- Disc brake pad set with 4 pads
- Hybrid friction material for consistent brake response
- Low dust and low noise characteristics for daily driving
- Prepared for electronic pad wear sensor use
- Outer and inner pad dimensions: 64.8 mm height, 222 mm width, 20.3 mm thickness
- Integrally molded friction material attachment
About the DFC 4000 HybriDynamic Line
The DFC 4000 HybriDynamic brake pad line is positioned for drivers who want a straightforward brake pad choice without having to sort through multiple friction types. Its hybrid formulation is aimed at delivering stable pedal feel and dependable brake response while keeping dust and noise under control for routine commuting and stop-and-go traffic.
Detailed Description
Part number 4000-1066-10 is a front- or rear-service style disc brake pad set depending on the vehicle application. The pads measure 222 mm wide, 64.8 mm tall, and 20.3 mm thick, with matching inner and outer pad dimensions for consistent fitment on the correct caliper setup. This set is prepared for an electronic wear sensor, but no sensor is included, and mounting hardware is not included.
This brake pad set is a practical choice for drivers looking for replacement brake pads for Honda Civic, Toyota Camry, and similar passenger vehicles where quiet operation, controlled dust, and reliable everyday braking matter. If you are comparing DFC 4000 brake pads by part number, 4000-1066-10 is the reference to verify before ordering.
What This Brake Pad Set Helps Address
- Squealing or noisy braking during normal street driving
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel from worn pads
- Reduced braking response caused by pad wear
- Need for a direct replacement disc brake pad set with wear-sensor preparation
Installation Notes and Tips
Confirm vehicle fitment by matching the pad dimensions, caliper shape, and wear-sensor setup before installation. Part number 4000-1066-10 is prepared for an electronic pad wear sensor, so verify whether your vehicle uses that system and transfer or replace the sensor as required by the application. Inspect rotors, calipers, and slide hardware during service, and follow the vehicle manufacturer’s brake bedding procedure after installation.
Compatible With selected Honda Civic and Toyota Camry brake applications where the listed pad dimensions and sensor preparation match the original equipment setup. Use the part number 4000-1066-10 to confirm the correct brake pad set before purchase.
Quality Assurance
Dynamite Friction markets the DFC HybriDynamic formulation as a value-focused brake pad solution engineered for consistent response, low dust, and low noise in daily driving conditions. Verify all measurements and sensor requirements against the vehicle’s original brake configuration to ensure proper service replacement.
