Dynamite Friction 4000-1001-00 Disc Brake Pad Set - Front or Rear
HybriDynamic Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and predictable brake response for everyday use. Built as a front disc brake pad set, part number 4000-1001-00 is a practical choice for drivers who want low dust, low noise, and stable stopping performance.
Compatible With a wide range of performance and sport-oriented vehicles, including Honda Civic, Acura Integra, Subaru WRX, and Tesla Model S applications, these pads are built around a hybrid friction material for balanced street performance. The DFC 4000 HybriDynamic line focuses on dependable braking behavior without forcing you to choose between comfort and control.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Pad quantity: 4
- Front disc brake pad set
- Part number: 4000-1001-00
Detailed Product Overview
The DFC 4000 HybriDynamic Brake Pads are engineered to provide a consistent brake pedal feel and reliable response across a broad range of front brake applications. With an outer and inner pad height of 77.2 mm, pad width of 131.8 mm, and overall thickness of 15 mm, this set is built to match the specified brake systems listed in the fitment data. The hybrid compound is aimed at everyday street use where quiet operation and controlled dust output matter.
This part number, 4000-1001-00, appears across multiple fitments including 2017-2019 Honda Civic front, 2024-2025 Acura Integra front, and 2014-2020 Tesla Model S front applications. It also covers performance-oriented platforms such as Subaru BRZ, Subaru WRX STI, Chevrolet Camaro, and Cadillac CTS front brake setups.
What It Helps Address
- Brake noise during normal commuting and stop-and-go traffic
- Excessive brake dust buildup on wheels
- Inconsistent pedal feel from worn front pads
- Reduced braking response from aging disc brake pads
- Need for a street-focused replacement pad on performance vehicles
Installation Notes and Tips
- Confirm front axle fitment by year, make, model, and brake package before ordering.
- Some applications note required hardware or specific rotor configurations; verify the notes for your vehicle.
- Pad wear sensor is not included, but the pads are prepared for a mechanical wear sensor where equipped.
- Inspect rotors, calipers, and guide hardware during pad replacement for even wear and proper operation.
- Follow the vehicle manufacturer’s bedding procedure after installation for stable initial performance.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads as a value-focused street pad line built for consistent braking behavior, low dust, and reduced noise. The formulation is intended to simplify pad selection by offering a balanced hybrid compound for daily driving and select performance applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
HybriDynamic Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and predictable brake response for everyday use. Built as a front disc brake pad set, part number 4000-1001-00 is a practical choice for drivers who want low dust, low noise, and stable stopping performance.
Compatible With a wide range of performance and sport-oriented vehicles, including Honda Civic, Acura Integra, Subaru WRX, and Tesla Model S applications, these pads are built around a hybrid friction material for balanced street performance. The DFC 4000 HybriDynamic line focuses on dependable braking behavior without forcing you to choose between comfort and control.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Pad quantity: 4
- Front disc brake pad set
- Part number: 4000-1001-00
Detailed Product Overview
The DFC 4000 HybriDynamic Brake Pads are engineered to provide a consistent brake pedal feel and reliable response across a broad range of front brake applications. With an outer and inner pad height of 77.2 mm, pad width of 131.8 mm, and overall thickness of 15 mm, this set is built to match the specified brake systems listed in the fitment data. The hybrid compound is aimed at everyday street use where quiet operation and controlled dust output matter.
This part number, 4000-1001-00, appears across multiple fitments including 2017-2019 Honda Civic front, 2024-2025 Acura Integra front, and 2014-2020 Tesla Model S front applications. It also covers performance-oriented platforms such as Subaru BRZ, Subaru WRX STI, Chevrolet Camaro, and Cadillac CTS front brake setups.
What It Helps Address
- Brake noise during normal commuting and stop-and-go traffic
- Excessive brake dust buildup on wheels
- Inconsistent pedal feel from worn front pads
- Reduced braking response from aging disc brake pads
- Need for a street-focused replacement pad on performance vehicles
Installation Notes and Tips
- Confirm front axle fitment by year, make, model, and brake package before ordering.
- Some applications note required hardware or specific rotor configurations; verify the notes for your vehicle.
- Pad wear sensor is not included, but the pads are prepared for a mechanical wear sensor where equipped.
- Inspect rotors, calipers, and guide hardware during pad replacement for even wear and proper operation.
- Follow the vehicle manufacturer’s bedding procedure after installation for stable initial performance.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads as a value-focused street pad line built for consistent braking behavior, low dust, and reduced noise. The formulation is intended to simplify pad selection by offering a balanced hybrid compound for daily driving and select performance applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $44.93
-65%$44.93
$15.73Description
HybriDynamic Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and predictable brake response for everyday use. Built as a front disc brake pad set, part number 4000-1001-00 is a practical choice for drivers who want low dust, low noise, and stable stopping performance.
Compatible With a wide range of performance and sport-oriented vehicles, including Honda Civic, Acura Integra, Subaru WRX, and Tesla Model S applications, these pads are built around a hybrid friction material for balanced street performance. The DFC 4000 HybriDynamic line focuses on dependable braking behavior without forcing you to choose between comfort and control.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Pad quantity: 4
- Front disc brake pad set
- Part number: 4000-1001-00
Detailed Product Overview
The DFC 4000 HybriDynamic Brake Pads are engineered to provide a consistent brake pedal feel and reliable response across a broad range of front brake applications. With an outer and inner pad height of 77.2 mm, pad width of 131.8 mm, and overall thickness of 15 mm, this set is built to match the specified brake systems listed in the fitment data. The hybrid compound is aimed at everyday street use where quiet operation and controlled dust output matter.
This part number, 4000-1001-00, appears across multiple fitments including 2017-2019 Honda Civic front, 2024-2025 Acura Integra front, and 2014-2020 Tesla Model S front applications. It also covers performance-oriented platforms such as Subaru BRZ, Subaru WRX STI, Chevrolet Camaro, and Cadillac CTS front brake setups.
What It Helps Address
- Brake noise during normal commuting and stop-and-go traffic
- Excessive brake dust buildup on wheels
- Inconsistent pedal feel from worn front pads
- Reduced braking response from aging disc brake pads
- Need for a street-focused replacement pad on performance vehicles
Installation Notes and Tips
- Confirm front axle fitment by year, make, model, and brake package before ordering.
- Some applications note required hardware or specific rotor configurations; verify the notes for your vehicle.
- Pad wear sensor is not included, but the pads are prepared for a mechanical wear sensor where equipped.
- Inspect rotors, calipers, and guide hardware during pad replacement for even wear and proper operation.
- Follow the vehicle manufacturer’s bedding procedure after installation for stable initial performance.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads as a value-focused street pad line built for consistent braking behavior, low dust, and reduced noise. The formulation is intended to simplify pad selection by offering a balanced hybrid compound for daily driving and select performance applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
