Dynamite Friction 4000-0903-00 Disc Brake Pad Set - Front
DFC 4000 HybriDynamic Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This front disc brake pad set is a practical choice for 2001-2005 Hyundai Santa Fe and 2002-2003 Kia Sedona applications, including the 276mm front disc setup noted for select Santa Fe models.
Part number 4000-0903-00 is part of the DFC 4000 HybriDynamic Brake Pads line, a hybrid friction-material range focused on balanced stopping performance and consistent feel without adding unnecessary complexity to pad selection.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer and inner pad dimensions: 149.1 mm wide, 58.2 mm high, 16.4 mm thick
Detailed Product Overview
DFC 4000 HybriDynamic Brake Pads are engineered to deliver a consistent pedal feel and dependable brake response for routine commuting and stop-and-go traffic. The hybrid friction compound helps provide predictable braking behavior while keeping dust and noise levels controlled, which makes this front brake pad set well suited to drivers who want a clean, quiet service replacement. Part number 4000-0903-00 is a direct fitment option for select Hyundai Santa Fe and Kia Sedona front brake applications.
Compatible With 2003-2005 Hyundai Santa Fe, front; 2002-2003 Kia Sedona, front; and 2002 Hyundai Santa Fe, front. Also fits 2001 Hyundai Santa Fe, front, for rear disc-equipped vehicles as listed in the fitment data.
Common Problems This Part Can Address
- Worn front brake pads causing reduced stopping performance
- Brake noise from aged or uneven pad material
- Excess brake dust buildup on wheels
- Inconsistent pedal feel during everyday driving
- Service replacement needs for front disc brake maintenance
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. This set is prepared for a mechanical wear sensor, but the sensor itself is not included. Mounting hardware is not included, so reuse or replace hardware as needed during brake service. Confirm the vehicle’s front brake configuration before ordering, especially on 2001-2005 Hyundai Santa Fe models and 2002-2003 Kia Sedona applications.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line around consistent braking feel, strong response, and controlled dust and noise for everyday use. Part number 4000-0903-00 is specified for the listed front applications to support accurate replacement selection.
DFC 4000 HybriDynamic Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This front disc brake pad set is a practical choice for 2001-2005 Hyundai Santa Fe and 2002-2003 Kia Sedona applications, including the 276mm front disc setup noted for select Santa Fe models.
Part number 4000-0903-00 is part of the DFC 4000 HybriDynamic Brake Pads line, a hybrid friction-material range focused on balanced stopping performance and consistent feel without adding unnecessary complexity to pad selection.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer and inner pad dimensions: 149.1 mm wide, 58.2 mm high, 16.4 mm thick
Detailed Product Overview
DFC 4000 HybriDynamic Brake Pads are engineered to deliver a consistent pedal feel and dependable brake response for routine commuting and stop-and-go traffic. The hybrid friction compound helps provide predictable braking behavior while keeping dust and noise levels controlled, which makes this front brake pad set well suited to drivers who want a clean, quiet service replacement. Part number 4000-0903-00 is a direct fitment option for select Hyundai Santa Fe and Kia Sedona front brake applications.
Compatible With 2003-2005 Hyundai Santa Fe, front; 2002-2003 Kia Sedona, front; and 2002 Hyundai Santa Fe, front. Also fits 2001 Hyundai Santa Fe, front, for rear disc-equipped vehicles as listed in the fitment data.
Common Problems This Part Can Address
- Worn front brake pads causing reduced stopping performance
- Brake noise from aged or uneven pad material
- Excess brake dust buildup on wheels
- Inconsistent pedal feel during everyday driving
- Service replacement needs for front disc brake maintenance
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. This set is prepared for a mechanical wear sensor, but the sensor itself is not included. Mounting hardware is not included, so reuse or replace hardware as needed during brake service. Confirm the vehicle’s front brake configuration before ordering, especially on 2001-2005 Hyundai Santa Fe models and 2002-2003 Kia Sedona applications.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line around consistent braking feel, strong response, and controlled dust and noise for everyday use. Part number 4000-0903-00 is specified for the listed front applications to support accurate replacement selection.
Original: $41.11
-65%$41.11
$14.39Description
DFC 4000 HybriDynamic Brake Pads for Daily Driving
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This front disc brake pad set is a practical choice for 2001-2005 Hyundai Santa Fe and 2002-2003 Kia Sedona applications, including the 276mm front disc setup noted for select Santa Fe models.
Part number 4000-0903-00 is part of the DFC 4000 HybriDynamic Brake Pads line, a hybrid friction-material range focused on balanced stopping performance and consistent feel without adding unnecessary complexity to pad selection.
Key Features
- Hybrid friction material for balanced braking response
- Low dust and low noise characteristics for daily driving
- Integrally molded friction material attachment
- 4-pad set for front disc brake service
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer and inner pad dimensions: 149.1 mm wide, 58.2 mm high, 16.4 mm thick
Detailed Product Overview
DFC 4000 HybriDynamic Brake Pads are engineered to deliver a consistent pedal feel and dependable brake response for routine commuting and stop-and-go traffic. The hybrid friction compound helps provide predictable braking behavior while keeping dust and noise levels controlled, which makes this front brake pad set well suited to drivers who want a clean, quiet service replacement. Part number 4000-0903-00 is a direct fitment option for select Hyundai Santa Fe and Kia Sedona front brake applications.
Compatible With 2003-2005 Hyundai Santa Fe, front; 2002-2003 Kia Sedona, front; and 2002 Hyundai Santa Fe, front. Also fits 2001 Hyundai Santa Fe, front, for rear disc-equipped vehicles as listed in the fitment data.
Common Problems This Part Can Address
- Worn front brake pads causing reduced stopping performance
- Brake noise from aged or uneven pad material
- Excess brake dust buildup on wheels
- Inconsistent pedal feel during everyday driving
- Service replacement needs for front disc brake maintenance
Installation Notes and Tips
Verify rotor condition, caliper operation, and pad fitment before installation. This set is prepared for a mechanical wear sensor, but the sensor itself is not included. Mounting hardware is not included, so reuse or replace hardware as needed during brake service. Confirm the vehicle’s front brake configuration before ordering, especially on 2001-2005 Hyundai Santa Fe models and 2002-2003 Kia Sedona applications.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line around consistent braking feel, strong response, and controlled dust and noise for everyday use. Part number 4000-0903-00 is specified for the listed front applications to support accurate replacement selection.
