Dynamite Friction 4000-0770-00 Disc Brake Pad Set - Rear
DFC 4000 HybriDynamic Rear Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This rear disc brake pad set is a practical choice for Subaru Legacy, Outback, Forester, Baja, and Impreza models with rear disc brakes.
The DFC 4000 HybriDynamic line focuses on balanced braking performance and value. For Subaru rear brake service, the hybrid friction material helps deliver consistent response while keeping dust and noise levels controlled for daily driving.
- Hybrid friction material for balanced brake response
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Low dust and low noise characteristics for street use
- Outer and inner pad dimensions: 108.2 mm wide, 41.7 mm high, 13.8 mm thick
Fitment Details
- Fits 2000-2009 Subaru Legacy, rear.
- Fits 2003-2006 Subaru Baja, rear.
- Fits 2000-2004 Subaru Outback, rear.
- Fits 1998-2003 Subaru Forester, rear. Rear disc brakes.
- Fits 2003 Subaru Impreza, rear. From 10/02 to 12/02.
- Fits 2002 Subaru Impreza, rear. To 5/02.
- Fits 1999-2001 Subaru Impreza, rear.
- Fits 1998 Subaru Impreza, rear. From 7/98.
What This Brake Pad Set Helps Address
- Brake noise during normal stop-and-go driving
- Excessive brake dust buildup on rear wheels
- Uneven or inconsistent rear brake pedal feel
- Worn rear disc brake pads on Subaru Legacy, Outback, Forester, Baja, or Impreza models
- Reduced braking response from aged friction material
Installation Notes
Confirm rear disc brake application before ordering. This set is prepared for a mechanical pad wear sensor, but a wear sensor is not included. Mounting hardware is not included. Verify pad dimensions and sensor provisions against the existing brake assembly before installation. Part number 4000-0770-00 is commonly searched for Subaru rear brake pad replacement, and 4000-0770-00 should be matched to the vehicle’s rear brake configuration.
Quality Assurance
Dynamite Friction’s DFC 4000 HybriDynamic brake pad formulation is engineered to provide consistent braking feel, dependable response, and controlled dust and noise for daily driving. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
DFC 4000 HybriDynamic Rear Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This rear disc brake pad set is a practical choice for Subaru Legacy, Outback, Forester, Baja, and Impreza models with rear disc brakes.
The DFC 4000 HybriDynamic line focuses on balanced braking performance and value. For Subaru rear brake service, the hybrid friction material helps deliver consistent response while keeping dust and noise levels controlled for daily driving.
- Hybrid friction material for balanced brake response
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Low dust and low noise characteristics for street use
- Outer and inner pad dimensions: 108.2 mm wide, 41.7 mm high, 13.8 mm thick
Fitment Details
- Fits 2000-2009 Subaru Legacy, rear.
- Fits 2003-2006 Subaru Baja, rear.
- Fits 2000-2004 Subaru Outback, rear.
- Fits 1998-2003 Subaru Forester, rear. Rear disc brakes.
- Fits 2003 Subaru Impreza, rear. From 10/02 to 12/02.
- Fits 2002 Subaru Impreza, rear. To 5/02.
- Fits 1999-2001 Subaru Impreza, rear.
- Fits 1998 Subaru Impreza, rear. From 7/98.
What This Brake Pad Set Helps Address
- Brake noise during normal stop-and-go driving
- Excessive brake dust buildup on rear wheels
- Uneven or inconsistent rear brake pedal feel
- Worn rear disc brake pads on Subaru Legacy, Outback, Forester, Baja, or Impreza models
- Reduced braking response from aged friction material
Installation Notes
Confirm rear disc brake application before ordering. This set is prepared for a mechanical pad wear sensor, but a wear sensor is not included. Mounting hardware is not included. Verify pad dimensions and sensor provisions against the existing brake assembly before installation. Part number 4000-0770-00 is commonly searched for Subaru rear brake pad replacement, and 4000-0770-00 should be matched to the vehicle’s rear brake configuration.
Quality Assurance
Dynamite Friction’s DFC 4000 HybriDynamic brake pad formulation is engineered to provide consistent braking feel, dependable response, and controlled dust and noise for daily driving. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $32.89
-65%$32.89
$11.51Description
DFC 4000 HybriDynamic Rear Brake Pads
Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This rear disc brake pad set is a practical choice for Subaru Legacy, Outback, Forester, Baja, and Impreza models with rear disc brakes.
The DFC 4000 HybriDynamic line focuses on balanced braking performance and value. For Subaru rear brake service, the hybrid friction material helps deliver consistent response while keeping dust and noise levels controlled for daily driving.
- Hybrid friction material for balanced brake response
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Prepared for a mechanical pad wear sensor
- Low dust and low noise characteristics for street use
- Outer and inner pad dimensions: 108.2 mm wide, 41.7 mm high, 13.8 mm thick
Fitment Details
- Fits 2000-2009 Subaru Legacy, rear.
- Fits 2003-2006 Subaru Baja, rear.
- Fits 2000-2004 Subaru Outback, rear.
- Fits 1998-2003 Subaru Forester, rear. Rear disc brakes.
- Fits 2003 Subaru Impreza, rear. From 10/02 to 12/02.
- Fits 2002 Subaru Impreza, rear. To 5/02.
- Fits 1999-2001 Subaru Impreza, rear.
- Fits 1998 Subaru Impreza, rear. From 7/98.
What This Brake Pad Set Helps Address
- Brake noise during normal stop-and-go driving
- Excessive brake dust buildup on rear wheels
- Uneven or inconsistent rear brake pedal feel
- Worn rear disc brake pads on Subaru Legacy, Outback, Forester, Baja, or Impreza models
- Reduced braking response from aged friction material
Installation Notes
Confirm rear disc brake application before ordering. This set is prepared for a mechanical pad wear sensor, but a wear sensor is not included. Mounting hardware is not included. Verify pad dimensions and sensor provisions against the existing brake assembly before installation. Part number 4000-0770-00 is commonly searched for Subaru rear brake pad replacement, and 4000-0770-00 should be matched to the vehicle’s rear brake configuration.
Quality Assurance
Dynamite Friction’s DFC 4000 HybriDynamic brake pad formulation is engineered to provide consistent braking feel, dependable response, and controlled dust and noise for daily driving. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
