Dynamite Friction 4000-0724-00 Disc Brake Pad Set - Rear
DFC 4000 HybriDynamic Rear Brake Pads
Dynamite Friction DFC 4000 HybriDynamic brake pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation for everyday use. This rear disc brake pad set is a direct fit for select Mitsubishi Diamante models and uses a hybrid friction material for balanced street performance.
Key Features
- Hybrid friction material for consistent brake response
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Low dust and low noise characteristics for daily driving
- Outer and inner pad height: 55.1 mm (2.169 in.)
- Outer and inner pad width: 114 mm (4.488 in.)
- Outer and inner pad thickness: 14 mm (0.551 in.)
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Product Details
The DFC 4000 HybriDynamic Brake Pads line focuses on a practical balance of braking feel, durability, and everyday drivability. Part number 4000-0724-00 is engineered as a rear disc brake pad set for 1997-2004 Mitsubishi Diamante applications, giving owners a straightforward replacement option when servicing rear brakes. The hybrid compound helps deliver predictable pedal response while keeping dust and noise levels controlled for regular commuting and stop-and-go driving. This part number, 4000-0724-00, is a solid match for Mitsubishi Diamante rear brake service where consistent street performance matters.
Compatible With 1997-2004 Mitsubishi Diamante, rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise from pads that have reached service limits
- Excess brake dust from older pad material
- Uneven or inconsistent pedal feel during normal driving
- Rear brake service needs on a 1997-2004 Mitsubishi Diamante
Installation Notes
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and pad contact points, then inspect the rear braking system for uneven wear or seized hardware. Because mounting hardware is not included, reuse only serviceable components or replace them as needed during brake service. Confirm the vehicle is a 1997-2004 Mitsubishi Diamante, rear application before ordering or installing part number 4000-0724-00.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad option with consistent pedal feel, strong brake response, and low-dust, low-noise street performance. Part number 4000-0724-00 is built to meet the needs of routine rear brake replacement on the Mitsubishi Diamante.
DFC 4000 HybriDynamic Rear Brake Pads
Dynamite Friction DFC 4000 HybriDynamic brake pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation for everyday use. This rear disc brake pad set is a direct fit for select Mitsubishi Diamante models and uses a hybrid friction material for balanced street performance.
Key Features
- Hybrid friction material for consistent brake response
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Low dust and low noise characteristics for daily driving
- Outer and inner pad height: 55.1 mm (2.169 in.)
- Outer and inner pad width: 114 mm (4.488 in.)
- Outer and inner pad thickness: 14 mm (0.551 in.)
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Product Details
The DFC 4000 HybriDynamic Brake Pads line focuses on a practical balance of braking feel, durability, and everyday drivability. Part number 4000-0724-00 is engineered as a rear disc brake pad set for 1997-2004 Mitsubishi Diamante applications, giving owners a straightforward replacement option when servicing rear brakes. The hybrid compound helps deliver predictable pedal response while keeping dust and noise levels controlled for regular commuting and stop-and-go driving. This part number, 4000-0724-00, is a solid match for Mitsubishi Diamante rear brake service where consistent street performance matters.
Compatible With 1997-2004 Mitsubishi Diamante, rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise from pads that have reached service limits
- Excess brake dust from older pad material
- Uneven or inconsistent pedal feel during normal driving
- Rear brake service needs on a 1997-2004 Mitsubishi Diamante
Installation Notes
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and pad contact points, then inspect the rear braking system for uneven wear or seized hardware. Because mounting hardware is not included, reuse only serviceable components or replace them as needed during brake service. Confirm the vehicle is a 1997-2004 Mitsubishi Diamante, rear application before ordering or installing part number 4000-0724-00.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad option with consistent pedal feel, strong brake response, and low-dust, low-noise street performance. Part number 4000-0724-00 is built to meet the needs of routine rear brake replacement on the Mitsubishi Diamante.
Original: $36.22
-65%$36.22
$12.68Description
DFC 4000 HybriDynamic Rear Brake Pads
Dynamite Friction DFC 4000 HybriDynamic brake pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation for everyday use. This rear disc brake pad set is a direct fit for select Mitsubishi Diamante models and uses a hybrid friction material for balanced street performance.
Key Features
- Hybrid friction material for consistent brake response
- Rear disc brake pad set with 4 pads
- Integrally molded friction material attachment
- Low dust and low noise characteristics for daily driving
- Outer and inner pad height: 55.1 mm (2.169 in.)
- Outer and inner pad width: 114 mm (4.488 in.)
- Outer and inner pad thickness: 14 mm (0.551 in.)
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Product Details
The DFC 4000 HybriDynamic Brake Pads line focuses on a practical balance of braking feel, durability, and everyday drivability. Part number 4000-0724-00 is engineered as a rear disc brake pad set for 1997-2004 Mitsubishi Diamante applications, giving owners a straightforward replacement option when servicing rear brakes. The hybrid compound helps deliver predictable pedal response while keeping dust and noise levels controlled for regular commuting and stop-and-go driving. This part number, 4000-0724-00, is a solid match for Mitsubishi Diamante rear brake service where consistent street performance matters.
Compatible With 1997-2004 Mitsubishi Diamante, rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Part Can Address
- Worn rear brake pads causing reduced stopping performance
- Brake noise from pads that have reached service limits
- Excess brake dust from older pad material
- Uneven or inconsistent pedal feel during normal driving
- Rear brake service needs on a 1997-2004 Mitsubishi Diamante
Installation Notes
Verify rotor condition, caliper operation, and pad fitment before installation. Clean the caliper bracket and pad contact points, then inspect the rear braking system for uneven wear or seized hardware. Because mounting hardware is not included, reuse only serviceable components or replace them as needed during brake service. Confirm the vehicle is a 1997-2004 Mitsubishi Diamante, rear application before ordering or installing part number 4000-0724-00.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad option with consistent pedal feel, strong brake response, and low-dust, low-noise street performance. Part number 4000-0724-00 is built to meet the needs of routine rear brake replacement on the Mitsubishi Diamante.
