Dynamite Friction 4000-0461-10 Disc Brake Pad Set - Rear
Rear Brake Pads for Subaru Impreza
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and everyday stopping performance. This rear disc brake pad set is a direct fit for 2006-2007 Subaru Impreza models and is tuned for low dust and low noise operation.
Part number 4000-0461-10 is part of the DFC 4000 HybriDynamic Brake Pads line, a hybrid friction platform that simplifies pad selection by balancing response, comfort, and value for daily driving. If you are searching for rear brake pads for a 2006 Subaru Impreza or 2007 Subaru Impreza, 4000-0461-10 is a focused replacement option.
Key Features
- Fits 2006-2007 Subaru Impreza, rear
- Disc brake pad set with 4 pads
- Hybrid friction material composition
- Integrally molded friction material attachment
- Low dust and low noise characteristics
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer and inner pad dimensions: 54.6 mm height, 73.2 mm width, 15.8 mm thickness
Detailed Description
The DFC 4000 HybriDynamic Brake Pads line is engineered to deliver consistent pedal feel and responsive braking for routine street use. This rear pad set uses a hybrid friction formulation to help maintain stable brake behavior while keeping dust and noise levels controlled for a cleaner, quieter driving experience. Part number 4000-0461-10 is a practical choice for Subaru Impreza rear brake service when you want a balanced replacement pad rather than a track-focused compound.
Compatible With 2006-2007 Subaru Impreza rear brake applications, this set is sized for the rear axle and includes four pads. The pad design is prepared for a mechanical wear sensor, which helps match the original brake system layout where applicable. For shoppers comparing rear brake pads for Subaru Impreza 2006-2007, 4000-0461-10 offers a straightforward fitment-specific solution.
What It Helps Address
- Squealing or noisy rear brake operation
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Worn rear disc brake pads
- Reduced braking response during daily driving
Installation Notes and Tips
Verify rear fitment before installation and confirm the pad shape matches your caliper setup on the 2006-2007 Subaru Impreza. Inspect rotors, caliper hardware, and sensor provisions during service, and replace worn components as needed. Since mounting hardware is not included, reuse only serviceable hardware or source the correct replacement parts separately. Proper bedding-in after installation helps establish stable pad-to-rotor contact.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line around consistent braking behavior, controlled dust output, and reduced noise for daily use. Part number 4000-0461-10 is built as a rear disc brake pad set for the specified Subaru Impreza applications and follows the listed pad dimensions and sensor preparation details for accurate service selection.
Rear Brake Pads for Subaru Impreza
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and everyday stopping performance. This rear disc brake pad set is a direct fit for 2006-2007 Subaru Impreza models and is tuned for low dust and low noise operation.
Part number 4000-0461-10 is part of the DFC 4000 HybriDynamic Brake Pads line, a hybrid friction platform that simplifies pad selection by balancing response, comfort, and value for daily driving. If you are searching for rear brake pads for a 2006 Subaru Impreza or 2007 Subaru Impreza, 4000-0461-10 is a focused replacement option.
Key Features
- Fits 2006-2007 Subaru Impreza, rear
- Disc brake pad set with 4 pads
- Hybrid friction material composition
- Integrally molded friction material attachment
- Low dust and low noise characteristics
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer and inner pad dimensions: 54.6 mm height, 73.2 mm width, 15.8 mm thickness
Detailed Description
The DFC 4000 HybriDynamic Brake Pads line is engineered to deliver consistent pedal feel and responsive braking for routine street use. This rear pad set uses a hybrid friction formulation to help maintain stable brake behavior while keeping dust and noise levels controlled for a cleaner, quieter driving experience. Part number 4000-0461-10 is a practical choice for Subaru Impreza rear brake service when you want a balanced replacement pad rather than a track-focused compound.
Compatible With 2006-2007 Subaru Impreza rear brake applications, this set is sized for the rear axle and includes four pads. The pad design is prepared for a mechanical wear sensor, which helps match the original brake system layout where applicable. For shoppers comparing rear brake pads for Subaru Impreza 2006-2007, 4000-0461-10 offers a straightforward fitment-specific solution.
What It Helps Address
- Squealing or noisy rear brake operation
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Worn rear disc brake pads
- Reduced braking response during daily driving
Installation Notes and Tips
Verify rear fitment before installation and confirm the pad shape matches your caliper setup on the 2006-2007 Subaru Impreza. Inspect rotors, caliper hardware, and sensor provisions during service, and replace worn components as needed. Since mounting hardware is not included, reuse only serviceable hardware or source the correct replacement parts separately. Proper bedding-in after installation helps establish stable pad-to-rotor contact.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line around consistent braking behavior, controlled dust output, and reduced noise for daily use. Part number 4000-0461-10 is built as a rear disc brake pad set for the specified Subaru Impreza applications and follows the listed pad dimensions and sensor preparation details for accurate service selection.
Description
Rear Brake Pads for Subaru Impreza
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and everyday stopping performance. This rear disc brake pad set is a direct fit for 2006-2007 Subaru Impreza models and is tuned for low dust and low noise operation.
Part number 4000-0461-10 is part of the DFC 4000 HybriDynamic Brake Pads line, a hybrid friction platform that simplifies pad selection by balancing response, comfort, and value for daily driving. If you are searching for rear brake pads for a 2006 Subaru Impreza or 2007 Subaru Impreza, 4000-0461-10 is a focused replacement option.
Key Features
- Fits 2006-2007 Subaru Impreza, rear
- Disc brake pad set with 4 pads
- Hybrid friction material composition
- Integrally molded friction material attachment
- Low dust and low noise characteristics
- Prepared for a mechanical pad wear sensor
- Pad wear sensor not included
- Mounting hardware not included
- Outer and inner pad dimensions: 54.6 mm height, 73.2 mm width, 15.8 mm thickness
Detailed Description
The DFC 4000 HybriDynamic Brake Pads line is engineered to deliver consistent pedal feel and responsive braking for routine street use. This rear pad set uses a hybrid friction formulation to help maintain stable brake behavior while keeping dust and noise levels controlled for a cleaner, quieter driving experience. Part number 4000-0461-10 is a practical choice for Subaru Impreza rear brake service when you want a balanced replacement pad rather than a track-focused compound.
Compatible With 2006-2007 Subaru Impreza rear brake applications, this set is sized for the rear axle and includes four pads. The pad design is prepared for a mechanical wear sensor, which helps match the original brake system layout where applicable. For shoppers comparing rear brake pads for Subaru Impreza 2006-2007, 4000-0461-10 offers a straightforward fitment-specific solution.
What It Helps Address
- Squealing or noisy rear brake operation
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Worn rear disc brake pads
- Reduced braking response during daily driving
Installation Notes and Tips
Verify rear fitment before installation and confirm the pad shape matches your caliper setup on the 2006-2007 Subaru Impreza. Inspect rotors, caliper hardware, and sensor provisions during service, and replace worn components as needed. Since mounting hardware is not included, reuse only serviceable hardware or source the correct replacement parts separately. Proper bedding-in after installation helps establish stable pad-to-rotor contact.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line around consistent braking behavior, controlled dust output, and reduced noise for daily use. Part number 4000-0461-10 is built as a rear disc brake pad set for the specified Subaru Impreza applications and follows the listed pad dimensions and sensor preparation details for accurate service selection.
