Dynamite Friction 4000-0431-00 Disc Brake Pad Set - Front
DFC 4000 HybriDynamic Brake Pads for Mustang
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and responsive braking for daily driving. This front disc brake pad set is built with a hybrid friction material to balance stopping performance, low dust, and low noise on compatible Ford applications.
The DFC 4000 HybriDynamic Brake Pads line focuses on straightforward material selection, giving drivers a practical brake pad option without guesswork. Part number 4000-0431-00 is a front pad set for 1987-1993 Ford Mustang and 1987-1988 Ford Thunderbird applications listed below.
Key Features
- Hybrid friction material for balanced brake response
- Front disc brake pad set with 4 pads included
- Integrally molded friction material attachment
- Low dust and low noise characteristics for daily use
- Outer and inner pad dimensions: 107.4 mm wide, 59.9 mm high, 18.3 mm thick
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Detailed Description
DFC 4000 HybriDynamic Brake Pads are engineered for drivers who want predictable braking performance and a clean, quiet street setup. The hybrid friction compound is selected to provide steady pedal feel and strong brake response while keeping dust and noise levels controlled. Part number 4000-0431-00 is a direct-fit front disc brake pad set for 1987-1993 Ford Mustang and 1987-1988 Ford Thunderbird front brake applications.
This brake pad set uses an integrally molded friction material attachment and includes four pads for the axle set. The pad dimensions measure 107.4 mm in width, 59.9 mm in height, and 18.3 mm in overall thickness, helping confirm the correct replacement before installation. If you are searching for 1987-1993 Ford Mustang front brake pads or 1987-1988 Ford Thunderbird front disc brake pads, 4000-0431-00 is the matching part number to verify.
What It Helps Solve
- Squealing or noisy front brake operation
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Reduced braking response from worn front pads
- Need for a daily-driver brake pad replacement on Ford Mustang or Ford Thunderbird
Installation Notes and Tips
Confirm rotor condition, caliper operation, and pad dimensions before installation. This set does not include mounting hardware and is not prepared for a pad wear sensor. For 1987-1993 Ford Mustang front brake service and 1987-1988 Ford Thunderbird front brake service, compare the old pads to the listed measurements and verify the vehicle’s front brake configuration before assembly.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads line around consistent braking feel, dependable response, and everyday drivability. Part number 4000-0431-00 is built to meet the needs of front brake replacement on the listed Ford applications with a focus on low dust and low noise performance.
DFC 4000 HybriDynamic Brake Pads for Mustang
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and responsive braking for daily driving. This front disc brake pad set is built with a hybrid friction material to balance stopping performance, low dust, and low noise on compatible Ford applications.
The DFC 4000 HybriDynamic Brake Pads line focuses on straightforward material selection, giving drivers a practical brake pad option without guesswork. Part number 4000-0431-00 is a front pad set for 1987-1993 Ford Mustang and 1987-1988 Ford Thunderbird applications listed below.
Key Features
- Hybrid friction material for balanced brake response
- Front disc brake pad set with 4 pads included
- Integrally molded friction material attachment
- Low dust and low noise characteristics for daily use
- Outer and inner pad dimensions: 107.4 mm wide, 59.9 mm high, 18.3 mm thick
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Detailed Description
DFC 4000 HybriDynamic Brake Pads are engineered for drivers who want predictable braking performance and a clean, quiet street setup. The hybrid friction compound is selected to provide steady pedal feel and strong brake response while keeping dust and noise levels controlled. Part number 4000-0431-00 is a direct-fit front disc brake pad set for 1987-1993 Ford Mustang and 1987-1988 Ford Thunderbird front brake applications.
This brake pad set uses an integrally molded friction material attachment and includes four pads for the axle set. The pad dimensions measure 107.4 mm in width, 59.9 mm in height, and 18.3 mm in overall thickness, helping confirm the correct replacement before installation. If you are searching for 1987-1993 Ford Mustang front brake pads or 1987-1988 Ford Thunderbird front disc brake pads, 4000-0431-00 is the matching part number to verify.
What It Helps Solve
- Squealing or noisy front brake operation
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Reduced braking response from worn front pads
- Need for a daily-driver brake pad replacement on Ford Mustang or Ford Thunderbird
Installation Notes and Tips
Confirm rotor condition, caliper operation, and pad dimensions before installation. This set does not include mounting hardware and is not prepared for a pad wear sensor. For 1987-1993 Ford Mustang front brake service and 1987-1988 Ford Thunderbird front brake service, compare the old pads to the listed measurements and verify the vehicle’s front brake configuration before assembly.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads line around consistent braking feel, dependable response, and everyday drivability. Part number 4000-0431-00 is built to meet the needs of front brake replacement on the listed Ford applications with a focus on low dust and low noise performance.
Description
DFC 4000 HybriDynamic Brake Pads for Mustang
Dynamite Friction DFC 4000 HybriDynamic Brake Pads deliver consistent pedal feel and responsive braking for daily driving. This front disc brake pad set is built with a hybrid friction material to balance stopping performance, low dust, and low noise on compatible Ford applications.
The DFC 4000 HybriDynamic Brake Pads line focuses on straightforward material selection, giving drivers a practical brake pad option without guesswork. Part number 4000-0431-00 is a front pad set for 1987-1993 Ford Mustang and 1987-1988 Ford Thunderbird applications listed below.
Key Features
- Hybrid friction material for balanced brake response
- Front disc brake pad set with 4 pads included
- Integrally molded friction material attachment
- Low dust and low noise characteristics for daily use
- Outer and inner pad dimensions: 107.4 mm wide, 59.9 mm high, 18.3 mm thick
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Detailed Description
DFC 4000 HybriDynamic Brake Pads are engineered for drivers who want predictable braking performance and a clean, quiet street setup. The hybrid friction compound is selected to provide steady pedal feel and strong brake response while keeping dust and noise levels controlled. Part number 4000-0431-00 is a direct-fit front disc brake pad set for 1987-1993 Ford Mustang and 1987-1988 Ford Thunderbird front brake applications.
This brake pad set uses an integrally molded friction material attachment and includes four pads for the axle set. The pad dimensions measure 107.4 mm in width, 59.9 mm in height, and 18.3 mm in overall thickness, helping confirm the correct replacement before installation. If you are searching for 1987-1993 Ford Mustang front brake pads or 1987-1988 Ford Thunderbird front disc brake pads, 4000-0431-00 is the matching part number to verify.
What It Helps Solve
- Squealing or noisy front brake operation
- Excess brake dust buildup on wheels
- Uneven or inconsistent pedal feel
- Reduced braking response from worn front pads
- Need for a daily-driver brake pad replacement on Ford Mustang or Ford Thunderbird
Installation Notes and Tips
Confirm rotor condition, caliper operation, and pad dimensions before installation. This set does not include mounting hardware and is not prepared for a pad wear sensor. For 1987-1993 Ford Mustang front brake service and 1987-1988 Ford Thunderbird front brake service, compare the old pads to the listed measurements and verify the vehicle’s front brake configuration before assembly.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic Brake Pads line around consistent braking feel, dependable response, and everyday drivability. Part number 4000-0431-00 is built to meet the needs of front brake replacement on the listed Ford applications with a focus on low dust and low noise performance.
