Dynamite Friction 4000-0378-00 Disc Brake Pad Set - Front or Rear
DFC 4000 HybriDynamic Brake Pads for Pontiac
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This disc brake pad set uses a hybrid friction material to balance stopping performance with clean, quiet street driving.
Part number 4000-0378-00 is a front or rear disc brake pad set, depending on application, and is prepared for a mechanical pad wear sensor where equipped. It is a practical choice for Pontiac LeMans, Pontiac 6000, and Pontiac Fiero brake service.
Key Features
- Hybrid friction material for balanced street braking
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Pad quantity: 4
- Prepared for pad wear sensor; mechanical sensor type
- Outer and inner pad height: 59.2 mm (2.331 in)
- Outer and inner pad width: 100.1 mm (3.941 in)
- Outer and inner pad thickness: 14.1 mm (0.555 in)
Product Details
The DFC 4000 HybriDynamic Brake Pads line focuses on dependable daily-driving performance with a friction blend that helps reduce the guesswork when selecting replacement pads. For Pontiac brake repair, part number 4000-0378-00 delivers a straightforward OE-style disc pad replacement with dimensions and sensor preparation suited to the listed applications. This makes it a solid option for drivers servicing a Pontiac LeMans, Pontiac 6000, or Pontiac Fiero and looking for controlled braking behavior with less brake dust buildup.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Part Helps Address
- Squealing or noisy brake operation
- Excessive brake dust on wheels
- Uneven or inconsistent pedal feel
- Reduced braking response from worn pads
- Brake service needs on front or rear disc setups
Installation Notes and Tips
- Verify caliper, rotor, and pad dimensions before installation.
- Inspect the brake hardware and replace worn components as needed; mounting hardware is not included.
- Confirm whether the vehicle uses a mechanical pad wear sensor before installation.
- Clean the caliper bracket and rotor surfaces during brake service.
- Bed in the pads according to standard brake-in procedures after installation.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad solution with consistent braking feel, low dust, and low noise characteristics for daily driving. Part number 4000-0378-00 is built to match the listed fitment and dimensional requirements for the specified Pontiac applications.
Compatible With 1988 Pontiac Fiero, front; 1988-1993 Pontiac LeMans, front; and 1989-1990 Pontiac 6000, rear disc.
DFC 4000 HybriDynamic Brake Pads for Pontiac
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This disc brake pad set uses a hybrid friction material to balance stopping performance with clean, quiet street driving.
Part number 4000-0378-00 is a front or rear disc brake pad set, depending on application, and is prepared for a mechanical pad wear sensor where equipped. It is a practical choice for Pontiac LeMans, Pontiac 6000, and Pontiac Fiero brake service.
Key Features
- Hybrid friction material for balanced street braking
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Pad quantity: 4
- Prepared for pad wear sensor; mechanical sensor type
- Outer and inner pad height: 59.2 mm (2.331 in)
- Outer and inner pad width: 100.1 mm (3.941 in)
- Outer and inner pad thickness: 14.1 mm (0.555 in)
Product Details
The DFC 4000 HybriDynamic Brake Pads line focuses on dependable daily-driving performance with a friction blend that helps reduce the guesswork when selecting replacement pads. For Pontiac brake repair, part number 4000-0378-00 delivers a straightforward OE-style disc pad replacement with dimensions and sensor preparation suited to the listed applications. This makes it a solid option for drivers servicing a Pontiac LeMans, Pontiac 6000, or Pontiac Fiero and looking for controlled braking behavior with less brake dust buildup.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Part Helps Address
- Squealing or noisy brake operation
- Excessive brake dust on wheels
- Uneven or inconsistent pedal feel
- Reduced braking response from worn pads
- Brake service needs on front or rear disc setups
Installation Notes and Tips
- Verify caliper, rotor, and pad dimensions before installation.
- Inspect the brake hardware and replace worn components as needed; mounting hardware is not included.
- Confirm whether the vehicle uses a mechanical pad wear sensor before installation.
- Clean the caliper bracket and rotor surfaces during brake service.
- Bed in the pads according to standard brake-in procedures after installation.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad solution with consistent braking feel, low dust, and low noise characteristics for daily driving. Part number 4000-0378-00 is built to match the listed fitment and dimensional requirements for the specified Pontiac applications.
Compatible With 1988 Pontiac Fiero, front; 1988-1993 Pontiac LeMans, front; and 1989-1990 Pontiac 6000, rear disc.
Original: $37.05
-65%$37.05
$12.97Description
DFC 4000 HybriDynamic Brake Pads for Pontiac
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, responsive braking, and low-noise operation in everyday use. This disc brake pad set uses a hybrid friction material to balance stopping performance with clean, quiet street driving.
Part number 4000-0378-00 is a front or rear disc brake pad set, depending on application, and is prepared for a mechanical pad wear sensor where equipped. It is a practical choice for Pontiac LeMans, Pontiac 6000, and Pontiac Fiero brake service.
Key Features
- Hybrid friction material for balanced street braking
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Pad quantity: 4
- Prepared for pad wear sensor; mechanical sensor type
- Outer and inner pad height: 59.2 mm (2.331 in)
- Outer and inner pad width: 100.1 mm (3.941 in)
- Outer and inner pad thickness: 14.1 mm (0.555 in)
Product Details
The DFC 4000 HybriDynamic Brake Pads line focuses on dependable daily-driving performance with a friction blend that helps reduce the guesswork when selecting replacement pads. For Pontiac brake repair, part number 4000-0378-00 delivers a straightforward OE-style disc pad replacement with dimensions and sensor preparation suited to the listed applications. This makes it a solid option for drivers servicing a Pontiac LeMans, Pontiac 6000, or Pontiac Fiero and looking for controlled braking behavior with less brake dust buildup.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Part Helps Address
- Squealing or noisy brake operation
- Excessive brake dust on wheels
- Uneven or inconsistent pedal feel
- Reduced braking response from worn pads
- Brake service needs on front or rear disc setups
Installation Notes and Tips
- Verify caliper, rotor, and pad dimensions before installation.
- Inspect the brake hardware and replace worn components as needed; mounting hardware is not included.
- Confirm whether the vehicle uses a mechanical pad wear sensor before installation.
- Clean the caliper bracket and rotor surfaces during brake service.
- Bed in the pads according to standard brake-in procedures after installation.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad solution with consistent braking feel, low dust, and low noise characteristics for daily driving. Part number 4000-0378-00 is built to match the listed fitment and dimensional requirements for the specified Pontiac applications.
Compatible With 1988 Pontiac Fiero, front; 1988-1993 Pontiac LeMans, front; and 1989-1990 Pontiac 6000, rear disc.
