Dynamite Friction 4000-0008-00 Disc Brake Pad Set - Front or Rear
DFC 4000 HybriDynamic Brake Pads for Classic GM Fitment
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and low-noise operation in a daily-driven classic. This disc brake pad set uses a hybrid friction material to balance stopping performance with clean, quiet street use.
Compatible With 1963-1966 Chevrolet Corvette front disc brakes and 1967-1982 Chevrolet Corvette rear applications, as well as 1969 Chevrolet Camaro front brakes. Part number 4000-0008-00 is a direct-fit disc brake pad set for select Corvette and Camaro brake systems.
Key Features
- Hybrid friction material for balanced street braking
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Pad quantity: 4
- Outer and inner pad height: 75.9 mm (2.988 in)
- Outer and inner pad width: 157.7 mm (6.209 in)
- Outer and inner pad thickness: 12.9 mm (0.508 in)
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Product Details
The DFC HybriDynamic brake pad line focuses on simplifying brake pad selection by using a hybrid compound that delivers stable performance across everyday driving conditions. For classic Chevrolet applications, that means a pad set that supports controlled braking without adding unnecessary noise or dust buildup. The 4000-0008-00 part number is sized for the listed Corvette and Camaro fitments and is intended for disc brake systems only.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during normal street driving
- Excessive brake dust on wheels
- Inconsistent pedal feel from worn pads
- Reduced braking response from aged friction material
- Routine pad replacement on classic Corvette and Camaro disc brakes
Installation Notes
Verify rotor condition, caliper operation, and pad dimensions before installation. Because mounting hardware is not included, reuse or replace the required hardware separately as needed. Confirm the vehicle position and brake configuration match the listed fitment before ordering. Part number 4000-0008-00 is listed for 1963-1966 Chevrolet Corvette front disc brakes, 1967-1982 Chevrolet Corvette rear, and 1969 Chevrolet Camaro front.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad series with consistent braking behavior, low dust, and low noise characteristics for daily driving use.
DFC 4000 HybriDynamic Brake Pads for Classic GM Fitment
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and low-noise operation in a daily-driven classic. This disc brake pad set uses a hybrid friction material to balance stopping performance with clean, quiet street use.
Compatible With 1963-1966 Chevrolet Corvette front disc brakes and 1967-1982 Chevrolet Corvette rear applications, as well as 1969 Chevrolet Camaro front brakes. Part number 4000-0008-00 is a direct-fit disc brake pad set for select Corvette and Camaro brake systems.
Key Features
- Hybrid friction material for balanced street braking
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Pad quantity: 4
- Outer and inner pad height: 75.9 mm (2.988 in)
- Outer and inner pad width: 157.7 mm (6.209 in)
- Outer and inner pad thickness: 12.9 mm (0.508 in)
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Product Details
The DFC HybriDynamic brake pad line focuses on simplifying brake pad selection by using a hybrid compound that delivers stable performance across everyday driving conditions. For classic Chevrolet applications, that means a pad set that supports controlled braking without adding unnecessary noise or dust buildup. The 4000-0008-00 part number is sized for the listed Corvette and Camaro fitments and is intended for disc brake systems only.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during normal street driving
- Excessive brake dust on wheels
- Inconsistent pedal feel from worn pads
- Reduced braking response from aged friction material
- Routine pad replacement on classic Corvette and Camaro disc brakes
Installation Notes
Verify rotor condition, caliper operation, and pad dimensions before installation. Because mounting hardware is not included, reuse or replace the required hardware separately as needed. Confirm the vehicle position and brake configuration match the listed fitment before ordering. Part number 4000-0008-00 is listed for 1963-1966 Chevrolet Corvette front disc brakes, 1967-1982 Chevrolet Corvette rear, and 1969 Chevrolet Camaro front.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad series with consistent braking behavior, low dust, and low noise characteristics for daily driving use.
Description
DFC 4000 HybriDynamic Brake Pads for Classic GM Fitment
The Dynamite Friction DFC 4000 HybriDynamic Brake Pads are built for drivers who want steady pedal feel, predictable brake response, and low-noise operation in a daily-driven classic. This disc brake pad set uses a hybrid friction material to balance stopping performance with clean, quiet street use.
Compatible With 1963-1966 Chevrolet Corvette front disc brakes and 1967-1982 Chevrolet Corvette rear applications, as well as 1969 Chevrolet Camaro front brakes. Part number 4000-0008-00 is a direct-fit disc brake pad set for select Corvette and Camaro brake systems.
Key Features
- Hybrid friction material for balanced street braking
- Consistent pedal feel and brake response
- Low dust and low noise characteristics
- Integrally molded friction material attachment
- Pad quantity: 4
- Outer and inner pad height: 75.9 mm (2.988 in)
- Outer and inner pad width: 157.7 mm (6.209 in)
- Outer and inner pad thickness: 12.9 mm (0.508 in)
- Prepared for pad wear sensor: No
- Mounting hardware included: No
Product Details
The DFC HybriDynamic brake pad line focuses on simplifying brake pad selection by using a hybrid compound that delivers stable performance across everyday driving conditions. For classic Chevrolet applications, that means a pad set that supports controlled braking without adding unnecessary noise or dust buildup. The 4000-0008-00 part number is sized for the listed Corvette and Camaro fitments and is intended for disc brake systems only.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during normal street driving
- Excessive brake dust on wheels
- Inconsistent pedal feel from worn pads
- Reduced braking response from aged friction material
- Routine pad replacement on classic Corvette and Camaro disc brakes
Installation Notes
Verify rotor condition, caliper operation, and pad dimensions before installation. Because mounting hardware is not included, reuse or replace the required hardware separately as needed. Confirm the vehicle position and brake configuration match the listed fitment before ordering. Part number 4000-0008-00 is listed for 1963-1966 Chevrolet Corvette front disc brakes, 1967-1982 Chevrolet Corvette rear, and 1969 Chevrolet Camaro front.
Quality Assurance
Dynamite Friction positions the DFC 4000 HybriDynamic line as a value-focused brake pad series with consistent braking behavior, low dust, and low noise characteristics for daily driving use.
