Dynamite Friction 350-27038 Brake Hydraulic Hose - Rear
Rear Brake Hydraulic Hose for Volvo S70 and V70
Dynamite Friction DFC Brake Hose 350-27038 is a rear brake hydraulic hose for select 1999-2000 Volvo S70 and Volvo V70 applications. It is a direct-fit brake hose replacement for vehicles with the listed rear brake configurations, including ATE rear calipers and specific front disc setups noted below.
Key Features
- Brake Hydraulic Hose for rear brake service
- DFC Brake Hose product line from Dynamite Friction
- Fits select 1999-2000 Volvo S70 and Volvo V70 models
- Application-specific fitment for rear brake routing
- Part number 350-27038 for ordering and catalog lookup
Fitment Details
- Fits 1999-2000 Volvo S70, rear, from Ch#596596.
- Fits 1999-2000 Volvo V70, rear, ATE rear calipers.
- Fits 2000 Volvo V70, rear.
- Fits 1999 Volvo V70, rear, 302mm front disc; from Ch# 588640; from Ch# 587597.
- Fits 1999 Volvo V70, rear, 280mm front disc; from Ch# 588640.
Product Description
The Dynamite Friction DFC Brake Hose line focuses on replacement brake hydraulic hoses for specific vehicle applications. Part number 350-27038 is built for rear brake use on select Volvo S70 and Volvo V70 models, with fitment tied to chassis and brake configuration details. If you are replacing a worn or damaged rear brake hose on a 1999-2000 Volvo S70 or Volvo V70, this part number provides a cataloged match for the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part Can Address
- Cracked or aging rear brake hose rubber
- Brake fluid seepage at the hose assembly
- Soft or inconsistent brake pedal feel caused by hose wear
- Rear brake line damage from road debris or corrosion exposure
- Failed inspection due to visible brake hose deterioration
Installation Notes and Tips
Verify the vehicle’s chassis number, rear caliper type, and front disc configuration before ordering. This rear brake hose is listed for specific Volvo S70 and Volvo V70 applications, so matching the notes in the fitment table is important for correct installation. Inspect adjoining brake lines, fittings, and mounting points during replacement, and bleed the brake system after installation according to factory service procedures.
Quality Assurance
Dynamite Friction’s DFC Brake Hose line is cataloged as a vehicle-specific brake hydraulic hose replacement for the listed Volvo applications. Use the part number 350-27038 and the fitment notes to confirm the correct rear brake hose before installation.
Rear Brake Hydraulic Hose for Volvo S70 and V70
Dynamite Friction DFC Brake Hose 350-27038 is a rear brake hydraulic hose for select 1999-2000 Volvo S70 and Volvo V70 applications. It is a direct-fit brake hose replacement for vehicles with the listed rear brake configurations, including ATE rear calipers and specific front disc setups noted below.
Key Features
- Brake Hydraulic Hose for rear brake service
- DFC Brake Hose product line from Dynamite Friction
- Fits select 1999-2000 Volvo S70 and Volvo V70 models
- Application-specific fitment for rear brake routing
- Part number 350-27038 for ordering and catalog lookup
Fitment Details
- Fits 1999-2000 Volvo S70, rear, from Ch#596596.
- Fits 1999-2000 Volvo V70, rear, ATE rear calipers.
- Fits 2000 Volvo V70, rear.
- Fits 1999 Volvo V70, rear, 302mm front disc; from Ch# 588640; from Ch# 587597.
- Fits 1999 Volvo V70, rear, 280mm front disc; from Ch# 588640.
Product Description
The Dynamite Friction DFC Brake Hose line focuses on replacement brake hydraulic hoses for specific vehicle applications. Part number 350-27038 is built for rear brake use on select Volvo S70 and Volvo V70 models, with fitment tied to chassis and brake configuration details. If you are replacing a worn or damaged rear brake hose on a 1999-2000 Volvo S70 or Volvo V70, this part number provides a cataloged match for the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part Can Address
- Cracked or aging rear brake hose rubber
- Brake fluid seepage at the hose assembly
- Soft or inconsistent brake pedal feel caused by hose wear
- Rear brake line damage from road debris or corrosion exposure
- Failed inspection due to visible brake hose deterioration
Installation Notes and Tips
Verify the vehicle’s chassis number, rear caliper type, and front disc configuration before ordering. This rear brake hose is listed for specific Volvo S70 and Volvo V70 applications, so matching the notes in the fitment table is important for correct installation. Inspect adjoining brake lines, fittings, and mounting points during replacement, and bleed the brake system after installation according to factory service procedures.
Quality Assurance
Dynamite Friction’s DFC Brake Hose line is cataloged as a vehicle-specific brake hydraulic hose replacement for the listed Volvo applications. Use the part number 350-27038 and the fitment notes to confirm the correct rear brake hose before installation.
Description
Rear Brake Hydraulic Hose for Volvo S70 and V70
Dynamite Friction DFC Brake Hose 350-27038 is a rear brake hydraulic hose for select 1999-2000 Volvo S70 and Volvo V70 applications. It is a direct-fit brake hose replacement for vehicles with the listed rear brake configurations, including ATE rear calipers and specific front disc setups noted below.
Key Features
- Brake Hydraulic Hose for rear brake service
- DFC Brake Hose product line from Dynamite Friction
- Fits select 1999-2000 Volvo S70 and Volvo V70 models
- Application-specific fitment for rear brake routing
- Part number 350-27038 for ordering and catalog lookup
Fitment Details
- Fits 1999-2000 Volvo S70, rear, from Ch#596596.
- Fits 1999-2000 Volvo V70, rear, ATE rear calipers.
- Fits 2000 Volvo V70, rear.
- Fits 1999 Volvo V70, rear, 302mm front disc; from Ch# 588640; from Ch# 587597.
- Fits 1999 Volvo V70, rear, 280mm front disc; from Ch# 588640.
Product Description
The Dynamite Friction DFC Brake Hose line focuses on replacement brake hydraulic hoses for specific vehicle applications. Part number 350-27038 is built for rear brake use on select Volvo S70 and Volvo V70 models, with fitment tied to chassis and brake configuration details. If you are replacing a worn or damaged rear brake hose on a 1999-2000 Volvo S70 or Volvo V70, this part number provides a cataloged match for the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Part Can Address
- Cracked or aging rear brake hose rubber
- Brake fluid seepage at the hose assembly
- Soft or inconsistent brake pedal feel caused by hose wear
- Rear brake line damage from road debris or corrosion exposure
- Failed inspection due to visible brake hose deterioration
Installation Notes and Tips
Verify the vehicle’s chassis number, rear caliper type, and front disc configuration before ordering. This rear brake hose is listed for specific Volvo S70 and Volvo V70 applications, so matching the notes in the fitment table is important for correct installation. Inspect adjoining brake lines, fittings, and mounting points during replacement, and bleed the brake system after installation according to factory service procedures.
Quality Assurance
Dynamite Friction’s DFC Brake Hose line is cataloged as a vehicle-specific brake hydraulic hose replacement for the listed Volvo applications. Use the part number 350-27038 and the fitment notes to confirm the correct rear brake hose before installation.
