Dynamite Friction 350-13117 Brake Hydraulic Hose - Rear Right
Rear Right Brake Hose for Subaru Forester
Dynamite Friction DFC Brake Hose 350-13117 is a DOT approved brake hydraulic hose for the rear right position on select Subaru Forester models. It is built with an EPDM outer sleeve and includes the required bracket and gasket or seal for the listed application.
For drivers searching for a rear right brake hose for 2019-2022 Subaru Forester, this DFC Brake Hose line part number 350-13117 provides the fitment and connection details needed for a direct replacement. The hose uses a female end with M10-1.00 thread on one side and a banjo fitting on the other, with a 10.0 mm banjo inside diameter.
Key Features
- DOT approved brake hydraulic hose
- EPDM outer sleeve material for brake system use
- Includes bracket and gasket or seal
- Rear right position fitment for Subaru Forester
- Female end with M10-1.00 thread
- Banjo fitting with 10.0 mm inside diameter
- DFC Brake Hose line from Dynamite Friction
- Part number 350-13117
Product Details
The DFC Brake Hose line focuses on brake hydraulic hose applications that require accurate end fittings, secure mounting, and vehicle-specific length. This 350-13117 hose measures 245 on one axis and 210 on the other, and it is listed for the rear right side on 2019-2022 Subaru Forester models. The hose construction and fitting layout support proper hydraulic routing in the brake system.
Compatible with 2019-2022 Subaru Forester, rear right. This part number 350-13117 is a direct-fit style brake hose for the listed application and is a practical choice when replacing a worn, leaking, or damaged rear brake line section. The DFC Brake Hose designation helps identify the specific product line within Dynamite Friction’s brake hydraulic components.
Common Replacement Reasons
- Brake fluid seepage at the hose or fitting
- Cracked, swollen, or aged rubber hose material
- Corrosion or damage at the mounting bracket area
- Soft or inconsistent brake pedal caused by hose deterioration
- Need for a rear right brake hose replacement on a Subaru Forester
Installation Notes
Verify rear right placement, fitting style, and thread size before installation. Confirm the banjo connection uses the included gasket or seal and that the bracket aligns with the original mounting point. After installation, bleed the brake system according to factory service procedures and inspect for leaks under pressure.
Quality Assurance
This brake hose is DOT approved and built with an EPDM outer sleeve for brake system service. Part number 350-13117 is listed for 2019-2022 Subaru Forester rear right applications and follows the DFC Brake Hose product line specifications.
Rear Right Brake Hose for Subaru Forester
Dynamite Friction DFC Brake Hose 350-13117 is a DOT approved brake hydraulic hose for the rear right position on select Subaru Forester models. It is built with an EPDM outer sleeve and includes the required bracket and gasket or seal for the listed application.
For drivers searching for a rear right brake hose for 2019-2022 Subaru Forester, this DFC Brake Hose line part number 350-13117 provides the fitment and connection details needed for a direct replacement. The hose uses a female end with M10-1.00 thread on one side and a banjo fitting on the other, with a 10.0 mm banjo inside diameter.
Key Features
- DOT approved brake hydraulic hose
- EPDM outer sleeve material for brake system use
- Includes bracket and gasket or seal
- Rear right position fitment for Subaru Forester
- Female end with M10-1.00 thread
- Banjo fitting with 10.0 mm inside diameter
- DFC Brake Hose line from Dynamite Friction
- Part number 350-13117
Product Details
The DFC Brake Hose line focuses on brake hydraulic hose applications that require accurate end fittings, secure mounting, and vehicle-specific length. This 350-13117 hose measures 245 on one axis and 210 on the other, and it is listed for the rear right side on 2019-2022 Subaru Forester models. The hose construction and fitting layout support proper hydraulic routing in the brake system.
Compatible with 2019-2022 Subaru Forester, rear right. This part number 350-13117 is a direct-fit style brake hose for the listed application and is a practical choice when replacing a worn, leaking, or damaged rear brake line section. The DFC Brake Hose designation helps identify the specific product line within Dynamite Friction’s brake hydraulic components.
Common Replacement Reasons
- Brake fluid seepage at the hose or fitting
- Cracked, swollen, or aged rubber hose material
- Corrosion or damage at the mounting bracket area
- Soft or inconsistent brake pedal caused by hose deterioration
- Need for a rear right brake hose replacement on a Subaru Forester
Installation Notes
Verify rear right placement, fitting style, and thread size before installation. Confirm the banjo connection uses the included gasket or seal and that the bracket aligns with the original mounting point. After installation, bleed the brake system according to factory service procedures and inspect for leaks under pressure.
Quality Assurance
This brake hose is DOT approved and built with an EPDM outer sleeve for brake system service. Part number 350-13117 is listed for 2019-2022 Subaru Forester rear right applications and follows the DFC Brake Hose product line specifications.
Original: $46.63
-65%$46.63
$16.32Description
Rear Right Brake Hose for Subaru Forester
Dynamite Friction DFC Brake Hose 350-13117 is a DOT approved brake hydraulic hose for the rear right position on select Subaru Forester models. It is built with an EPDM outer sleeve and includes the required bracket and gasket or seal for the listed application.
For drivers searching for a rear right brake hose for 2019-2022 Subaru Forester, this DFC Brake Hose line part number 350-13117 provides the fitment and connection details needed for a direct replacement. The hose uses a female end with M10-1.00 thread on one side and a banjo fitting on the other, with a 10.0 mm banjo inside diameter.
Key Features
- DOT approved brake hydraulic hose
- EPDM outer sleeve material for brake system use
- Includes bracket and gasket or seal
- Rear right position fitment for Subaru Forester
- Female end with M10-1.00 thread
- Banjo fitting with 10.0 mm inside diameter
- DFC Brake Hose line from Dynamite Friction
- Part number 350-13117
Product Details
The DFC Brake Hose line focuses on brake hydraulic hose applications that require accurate end fittings, secure mounting, and vehicle-specific length. This 350-13117 hose measures 245 on one axis and 210 on the other, and it is listed for the rear right side on 2019-2022 Subaru Forester models. The hose construction and fitting layout support proper hydraulic routing in the brake system.
Compatible with 2019-2022 Subaru Forester, rear right. This part number 350-13117 is a direct-fit style brake hose for the listed application and is a practical choice when replacing a worn, leaking, or damaged rear brake line section. The DFC Brake Hose designation helps identify the specific product line within Dynamite Friction’s brake hydraulic components.
Common Replacement Reasons
- Brake fluid seepage at the hose or fitting
- Cracked, swollen, or aged rubber hose material
- Corrosion or damage at the mounting bracket area
- Soft or inconsistent brake pedal caused by hose deterioration
- Need for a rear right brake hose replacement on a Subaru Forester
Installation Notes
Verify rear right placement, fitting style, and thread size before installation. Confirm the banjo connection uses the included gasket or seal and that the bracket aligns with the original mounting point. After installation, bleed the brake system according to factory service procedures and inspect for leaks under pressure.
Quality Assurance
This brake hose is DOT approved and built with an EPDM outer sleeve for brake system service. Part number 350-13117 is listed for 2019-2022 Subaru Forester rear right applications and follows the DFC Brake Hose product line specifications.
