Dynamite Friction 1600-2184-01 Disc Brake Pad Set - Front
DFC EURO 5000 Ceramic Front Brake Pads
The Dynamite Friction DFC EURO 5000 Ceramic Brake Pads and Hardware Kit, part number 1600-2184-01, is a front disc brake pad set built for select Land Rover applications. It uses ceramic friction material with integrally molded attachment and includes mounting hardware for a complete front brake service.
Compatible with Land Rover Defender 110, Defender 130, Defender 90, Discovery, Range Rover Sport, and Range Rover front brake applications listed below, this pad set is prepared for electronic pad wear sensor use where equipped. The 1600-2184-01 pad set is sized at 96 mm height, 152.8 mm width, and 16 mm overall thickness for both inner and outer pads.
Key Features
- Ceramic friction material for front disc brake service
- Mounting hardware included
- Prepared for electronic pad wear sensor use
- 4-pad set for one front axle service
- Inner and outer pads measure 96 mm high, 152.8 mm wide, and 16 mm thick
- Integrally molded friction material attachment
Product Line Details
The DFC EURO 5000 line is focused on European vehicle brake applications and uses ceramic pad construction for consistent front braking performance. This part number, 1600-2184-01, is cataloged for Land Rover models with specific front caliper and rotor configurations, including 4-piston front calipers and 363 mm front discs on certain 2026 Defender applications.
Vehicle Fitment
- Fits 2026 Land Rover Defender 110, front; 4 piston front calipers, 363 mm front disc.
- Fits 2026 Land Rover Defender 130, front; 4 piston front calipers, 363 mm front disc.
- Fits 2026 Land Rover Discovery, front.
- Fits 2020-2025 Land Rover Defender 110, front; requires sensor 341-11019 (1).
- Fits 2023-2025 Land Rover Defender 130, front; requires sensor 341-11019 (1).
- Fits 2021-2025 Land Rover Defender 90, front; requires sensor 341-11019 (1).
- Fits 2024-2025 Land Rover Discovery, front; requires sensor 341-11019 (1).
- Fits 2018-2022 Land Rover Discovery, front; requires sensor 341-11019 (1).
- Fits 2023 Land Rover Discovery, front; requires sensors 341-11019 (2).
- Fits 2021-2022 Land Rover Range Rover Sport, front; requires sensors 341-11019 (2).
- Fits 2021 Land Rover Range Rover, front; requires sensors 341-11019 (2).
- Fits 2018-2019 Land Rover Range Rover, front; requires sensor 341-11019 (1).
What This Brake Pad Set Helps Address
- Front brake pad wear on Land Rover Defender, Discovery, and Range Rover models
- Squeal or noise from worn front pads
- Reduced braking response from thin friction material
- Brake service needs when hardware replacement is required
- Front pad replacement on vehicles equipped for electronic wear sensors
Installation Notes
Verify rotor size, caliper type, and sensor requirements before installation. Some listed Land Rover applications require one or two electronic wear sensors, while this kit is prepared for sensor use but does not include a pad wear sensor. Confirm the front axle configuration and match the pad dimensions to the original equipment setup before assembly. Part number 1600-2184-01 is intended for front disc brake service only.
Quality Assurance
Dynamite Friction catalogs this DFC EURO 5000 ceramic brake pad set for specific Land Rover front brake applications with defined fitment and hardware coverage. The part number 1600-2184-01 is listed with exact dimensional data and application notes to support accurate brake service selection.
DFC EURO 5000 Ceramic Front Brake Pads
The Dynamite Friction DFC EURO 5000 Ceramic Brake Pads and Hardware Kit, part number 1600-2184-01, is a front disc brake pad set built for select Land Rover applications. It uses ceramic friction material with integrally molded attachment and includes mounting hardware for a complete front brake service.
Compatible with Land Rover Defender 110, Defender 130, Defender 90, Discovery, Range Rover Sport, and Range Rover front brake applications listed below, this pad set is prepared for electronic pad wear sensor use where equipped. The 1600-2184-01 pad set is sized at 96 mm height, 152.8 mm width, and 16 mm overall thickness for both inner and outer pads.
Key Features
- Ceramic friction material for front disc brake service
- Mounting hardware included
- Prepared for electronic pad wear sensor use
- 4-pad set for one front axle service
- Inner and outer pads measure 96 mm high, 152.8 mm wide, and 16 mm thick
- Integrally molded friction material attachment
Product Line Details
The DFC EURO 5000 line is focused on European vehicle brake applications and uses ceramic pad construction for consistent front braking performance. This part number, 1600-2184-01, is cataloged for Land Rover models with specific front caliper and rotor configurations, including 4-piston front calipers and 363 mm front discs on certain 2026 Defender applications.
Vehicle Fitment
- Fits 2026 Land Rover Defender 110, front; 4 piston front calipers, 363 mm front disc.
- Fits 2026 Land Rover Defender 130, front; 4 piston front calipers, 363 mm front disc.
- Fits 2026 Land Rover Discovery, front.
- Fits 2020-2025 Land Rover Defender 110, front; requires sensor 341-11019 (1).
- Fits 2023-2025 Land Rover Defender 130, front; requires sensor 341-11019 (1).
- Fits 2021-2025 Land Rover Defender 90, front; requires sensor 341-11019 (1).
- Fits 2024-2025 Land Rover Discovery, front; requires sensor 341-11019 (1).
- Fits 2018-2022 Land Rover Discovery, front; requires sensor 341-11019 (1).
- Fits 2023 Land Rover Discovery, front; requires sensors 341-11019 (2).
- Fits 2021-2022 Land Rover Range Rover Sport, front; requires sensors 341-11019 (2).
- Fits 2021 Land Rover Range Rover, front; requires sensors 341-11019 (2).
- Fits 2018-2019 Land Rover Range Rover, front; requires sensor 341-11019 (1).
What This Brake Pad Set Helps Address
- Front brake pad wear on Land Rover Defender, Discovery, and Range Rover models
- Squeal or noise from worn front pads
- Reduced braking response from thin friction material
- Brake service needs when hardware replacement is required
- Front pad replacement on vehicles equipped for electronic wear sensors
Installation Notes
Verify rotor size, caliper type, and sensor requirements before installation. Some listed Land Rover applications require one or two electronic wear sensors, while this kit is prepared for sensor use but does not include a pad wear sensor. Confirm the front axle configuration and match the pad dimensions to the original equipment setup before assembly. Part number 1600-2184-01 is intended for front disc brake service only.
Quality Assurance
Dynamite Friction catalogs this DFC EURO 5000 ceramic brake pad set for specific Land Rover front brake applications with defined fitment and hardware coverage. The part number 1600-2184-01 is listed with exact dimensional data and application notes to support accurate brake service selection.
Description
DFC EURO 5000 Ceramic Front Brake Pads
The Dynamite Friction DFC EURO 5000 Ceramic Brake Pads and Hardware Kit, part number 1600-2184-01, is a front disc brake pad set built for select Land Rover applications. It uses ceramic friction material with integrally molded attachment and includes mounting hardware for a complete front brake service.
Compatible with Land Rover Defender 110, Defender 130, Defender 90, Discovery, Range Rover Sport, and Range Rover front brake applications listed below, this pad set is prepared for electronic pad wear sensor use where equipped. The 1600-2184-01 pad set is sized at 96 mm height, 152.8 mm width, and 16 mm overall thickness for both inner and outer pads.
Key Features
- Ceramic friction material for front disc brake service
- Mounting hardware included
- Prepared for electronic pad wear sensor use
- 4-pad set for one front axle service
- Inner and outer pads measure 96 mm high, 152.8 mm wide, and 16 mm thick
- Integrally molded friction material attachment
Product Line Details
The DFC EURO 5000 line is focused on European vehicle brake applications and uses ceramic pad construction for consistent front braking performance. This part number, 1600-2184-01, is cataloged for Land Rover models with specific front caliper and rotor configurations, including 4-piston front calipers and 363 mm front discs on certain 2026 Defender applications.
Vehicle Fitment
- Fits 2026 Land Rover Defender 110, front; 4 piston front calipers, 363 mm front disc.
- Fits 2026 Land Rover Defender 130, front; 4 piston front calipers, 363 mm front disc.
- Fits 2026 Land Rover Discovery, front.
- Fits 2020-2025 Land Rover Defender 110, front; requires sensor 341-11019 (1).
- Fits 2023-2025 Land Rover Defender 130, front; requires sensor 341-11019 (1).
- Fits 2021-2025 Land Rover Defender 90, front; requires sensor 341-11019 (1).
- Fits 2024-2025 Land Rover Discovery, front; requires sensor 341-11019 (1).
- Fits 2018-2022 Land Rover Discovery, front; requires sensor 341-11019 (1).
- Fits 2023 Land Rover Discovery, front; requires sensors 341-11019 (2).
- Fits 2021-2022 Land Rover Range Rover Sport, front; requires sensors 341-11019 (2).
- Fits 2021 Land Rover Range Rover, front; requires sensors 341-11019 (2).
- Fits 2018-2019 Land Rover Range Rover, front; requires sensor 341-11019 (1).
What This Brake Pad Set Helps Address
- Front brake pad wear on Land Rover Defender, Discovery, and Range Rover models
- Squeal or noise from worn front pads
- Reduced braking response from thin friction material
- Brake service needs when hardware replacement is required
- Front pad replacement on vehicles equipped for electronic wear sensors
Installation Notes
Verify rotor size, caliper type, and sensor requirements before installation. Some listed Land Rover applications require one or two electronic wear sensors, while this kit is prepared for sensor use but does not include a pad wear sensor. Confirm the front axle configuration and match the pad dimensions to the original equipment setup before assembly. Part number 1600-2184-01 is intended for front disc brake service only.
Quality Assurance
Dynamite Friction catalogs this DFC EURO 5000 ceramic brake pad set for specific Land Rover front brake applications with defined fitment and hardware coverage. The part number 1600-2184-01 is listed with exact dimensional data and application notes to support accurate brake service selection.
