Dynamite Friction 1552-1809-00 Disc Brake Pad Set - Rear
Dynamite Friction DFC 5000 Brake Pads
The Dynamite Friction DFC 5000 Advanced Brake Pads - Low Metallic set is a 4-pad disc brake pad kit built with ceramic friction material and integrally molded attachment. Part number 1552-1809-00 is prepared for a mechanical pad wear sensor and is supplied without a wear sensor or mounting hardware.
For drivers searching for low metallic brake pads for Honda Civic or Toyota Corolla brake pad replacement applications, this DFC 5000 set provides a direct-fit pad configuration with matched inner and outer pad dimensions. The 1552-1809-00 brake pad set is sized for consistent caliper contact and straightforward service replacement.
Key Features
- Disc brake pad set with 4 pads
- Ceramic friction material composition
- Integrally molded friction material attachment
- Prepared for mechanical pad wear sensor use
- Outer and inner pad height: 49.5 mm (1.949 in)
- Outer and inner pad width: 115.6 mm (4.551 in)
- Outer and inner pad thickness: 16.5 mm (0.65 in)
- Part number: 1552-1809-00
Product Line Details
Dynamite Friction’s DFC 5000 Advanced Brake Pads - Low Metallic line focuses on brake pad service parts with ceramic friction material and application-specific sizing. This product line is suited for buyers comparing low metallic brake pads by pad shape, sensor preparation, and caliper fitment details rather than generic pad listings.
Detailed Description
The 1552-1809-00 brake pad set is a ceramic disc brake pad replacement designed around the listed pad dimensions and sensor preparation. With equal inner and outer pad measurements, this set supports balanced pad replacement on the axle it was engineered for. If you are sourcing brake pads for Honda Civic or Toyota Corolla maintenance, verify the pad shape, sensor style, and caliper dimensions against your original parts before installation.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pad wear from normal disc brake service intervals
- Squeal or noise caused by worn friction material
- Reduced braking response from thin or glazed pads
- Sensor-related service needs on vehicles using a mechanical wear indicator
- Uneven pad replacement when the inner and outer pads no longer match original thickness
Installation Notes
Confirm caliper fitment, pad shape, and wear sensor preparation before installation. This set does not include mounting hardware, and it is not supplied with a pad wear sensor. Clean the caliper bracket, inspect the rotor surface, and follow the vehicle service procedure for pad bedding after installation. For Honda Civic brake pad replacement or Toyota Corolla brake service, compare the removed pads to the listed dimensions: 115.6 mm width, 49.5 mm height, and 16.5 mm overall thickness.
Quality Assurance
Dynamite Friction identifies this as a DFC 5000 Advanced Brake Pads - Low Metallic product with ceramic friction material and integrally molded construction. Part number 1552-1809-00 is built to the published pad dimensions and sensor-prepared configuration for accurate service matching.
Dynamite Friction DFC 5000 Brake Pads
The Dynamite Friction DFC 5000 Advanced Brake Pads - Low Metallic set is a 4-pad disc brake pad kit built with ceramic friction material and integrally molded attachment. Part number 1552-1809-00 is prepared for a mechanical pad wear sensor and is supplied without a wear sensor or mounting hardware.
For drivers searching for low metallic brake pads for Honda Civic or Toyota Corolla brake pad replacement applications, this DFC 5000 set provides a direct-fit pad configuration with matched inner and outer pad dimensions. The 1552-1809-00 brake pad set is sized for consistent caliper contact and straightforward service replacement.
Key Features
- Disc brake pad set with 4 pads
- Ceramic friction material composition
- Integrally molded friction material attachment
- Prepared for mechanical pad wear sensor use
- Outer and inner pad height: 49.5 mm (1.949 in)
- Outer and inner pad width: 115.6 mm (4.551 in)
- Outer and inner pad thickness: 16.5 mm (0.65 in)
- Part number: 1552-1809-00
Product Line Details
Dynamite Friction’s DFC 5000 Advanced Brake Pads - Low Metallic line focuses on brake pad service parts with ceramic friction material and application-specific sizing. This product line is suited for buyers comparing low metallic brake pads by pad shape, sensor preparation, and caliper fitment details rather than generic pad listings.
Detailed Description
The 1552-1809-00 brake pad set is a ceramic disc brake pad replacement designed around the listed pad dimensions and sensor preparation. With equal inner and outer pad measurements, this set supports balanced pad replacement on the axle it was engineered for. If you are sourcing brake pads for Honda Civic or Toyota Corolla maintenance, verify the pad shape, sensor style, and caliper dimensions against your original parts before installation.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pad wear from normal disc brake service intervals
- Squeal or noise caused by worn friction material
- Reduced braking response from thin or glazed pads
- Sensor-related service needs on vehicles using a mechanical wear indicator
- Uneven pad replacement when the inner and outer pads no longer match original thickness
Installation Notes
Confirm caliper fitment, pad shape, and wear sensor preparation before installation. This set does not include mounting hardware, and it is not supplied with a pad wear sensor. Clean the caliper bracket, inspect the rotor surface, and follow the vehicle service procedure for pad bedding after installation. For Honda Civic brake pad replacement or Toyota Corolla brake service, compare the removed pads to the listed dimensions: 115.6 mm width, 49.5 mm height, and 16.5 mm overall thickness.
Quality Assurance
Dynamite Friction identifies this as a DFC 5000 Advanced Brake Pads - Low Metallic product with ceramic friction material and integrally molded construction. Part number 1552-1809-00 is built to the published pad dimensions and sensor-prepared configuration for accurate service matching.
Original: $47.93
-65%$47.93
$16.78Description
Dynamite Friction DFC 5000 Brake Pads
The Dynamite Friction DFC 5000 Advanced Brake Pads - Low Metallic set is a 4-pad disc brake pad kit built with ceramic friction material and integrally molded attachment. Part number 1552-1809-00 is prepared for a mechanical pad wear sensor and is supplied without a wear sensor or mounting hardware.
For drivers searching for low metallic brake pads for Honda Civic or Toyota Corolla brake pad replacement applications, this DFC 5000 set provides a direct-fit pad configuration with matched inner and outer pad dimensions. The 1552-1809-00 brake pad set is sized for consistent caliper contact and straightforward service replacement.
Key Features
- Disc brake pad set with 4 pads
- Ceramic friction material composition
- Integrally molded friction material attachment
- Prepared for mechanical pad wear sensor use
- Outer and inner pad height: 49.5 mm (1.949 in)
- Outer and inner pad width: 115.6 mm (4.551 in)
- Outer and inner pad thickness: 16.5 mm (0.65 in)
- Part number: 1552-1809-00
Product Line Details
Dynamite Friction’s DFC 5000 Advanced Brake Pads - Low Metallic line focuses on brake pad service parts with ceramic friction material and application-specific sizing. This product line is suited for buyers comparing low metallic brake pads by pad shape, sensor preparation, and caliper fitment details rather than generic pad listings.
Detailed Description
The 1552-1809-00 brake pad set is a ceramic disc brake pad replacement designed around the listed pad dimensions and sensor preparation. With equal inner and outer pad measurements, this set supports balanced pad replacement on the axle it was engineered for. If you are sourcing brake pads for Honda Civic or Toyota Corolla maintenance, verify the pad shape, sensor style, and caliper dimensions against your original parts before installation.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pad wear from normal disc brake service intervals
- Squeal or noise caused by worn friction material
- Reduced braking response from thin or glazed pads
- Sensor-related service needs on vehicles using a mechanical wear indicator
- Uneven pad replacement when the inner and outer pads no longer match original thickness
Installation Notes
Confirm caliper fitment, pad shape, and wear sensor preparation before installation. This set does not include mounting hardware, and it is not supplied with a pad wear sensor. Clean the caliper bracket, inspect the rotor surface, and follow the vehicle service procedure for pad bedding after installation. For Honda Civic brake pad replacement or Toyota Corolla brake service, compare the removed pads to the listed dimensions: 115.6 mm width, 49.5 mm height, and 16.5 mm overall thickness.
Quality Assurance
Dynamite Friction identifies this as a DFC 5000 Advanced Brake Pads - Low Metallic product with ceramic friction material and integrally molded construction. Part number 1552-1809-00 is built to the published pad dimensions and sensor-prepared configuration for accurate service matching.
