Delphi TA3576 Steering Tie Rod End - Front Left Outer
Delphi TA3576 Front Left Outer Tie Rod End
Delphi TA3576 is a steering tie rod end built for front left outer applications on select Nissan Frontier, Xterra, and Pathfinder models. It combines OE-based dimensional analysis with materials chosen for consistent steering response and proper fitment.
Key Features
- Front left outer steering tie rod end for select Nissan vehicles
- Pre-greased design with dust boot included
- Steel housing and steel tie rod construction
- Painted black finish
- Standard replacement grade
- Mounting hardware included
- Male to female end configuration with threaded stud
- Clockwise thread direction on both ends
- Delphi TA3576 is tested for temperature extremes and salt spray exposure
Detailed Description
Delphi TA3576 is engineered as a direct steering tie rod end replacement for the front left outer position. It is compatible with 2005-2019 Nissan Frontier, 2005-2015 Nissan Xterra, and 2005-2012 Nissan Pathfinder, making it a focused solution for drivers searching for a front left outer tie rod end for Nissan Frontier, Xterra, or Pathfinder steering repair. Delphi applies OE-style dimensional and material analysis to help ensure proper match-up between the original part and the aftermarket replacement. This part number, TA3576, is built with a steel housing, rubber dust boot, and POM bearing material for standard replacement service.
Delphi tests steering components under severe conditions, including temperatures below -40 degrees C and above 120 degrees C, plus 720 hours of salt spray exposure. This validation supports consistent performance in demanding road and weather conditions. If you are replacing a worn outer tie rod on a Nissan Frontier, Xterra, or Pathfinder, Delphi TA3576 provides a direct-fit option for the front left outer steering position.
This part cross-references MOOG Chassis Products ES800048 for the same application.
What It Helps Fix
- Loose or vague steering feel
- Clunking or knocking from the front suspension/steering area
- Uneven tire wear caused by worn steering linkage
- Excess play at the front left outer tie rod end
- Steering pull or poor alignment retention after component wear
Installation Notes and Tips
Install TA3576 at the front left outer steering position only. Verify thread direction, stud style, and overall length before installation, and perform a wheel alignment after replacement. Because this is a standard replacement tie rod end, inspect the adjacent steering and suspension components for wear at the same time.
Quality Assurance
Delphi uses OE-focused engineering, dimensional checks, and material analysis to support fit and function across its steering portfolio. TA3576 is validated through temperature cycling and salt spray testing to help confirm durability in real-world service.
Delphi TA3576 Front Left Outer Tie Rod End
Delphi TA3576 is a steering tie rod end built for front left outer applications on select Nissan Frontier, Xterra, and Pathfinder models. It combines OE-based dimensional analysis with materials chosen for consistent steering response and proper fitment.
Key Features
- Front left outer steering tie rod end for select Nissan vehicles
- Pre-greased design with dust boot included
- Steel housing and steel tie rod construction
- Painted black finish
- Standard replacement grade
- Mounting hardware included
- Male to female end configuration with threaded stud
- Clockwise thread direction on both ends
- Delphi TA3576 is tested for temperature extremes and salt spray exposure
Detailed Description
Delphi TA3576 is engineered as a direct steering tie rod end replacement for the front left outer position. It is compatible with 2005-2019 Nissan Frontier, 2005-2015 Nissan Xterra, and 2005-2012 Nissan Pathfinder, making it a focused solution for drivers searching for a front left outer tie rod end for Nissan Frontier, Xterra, or Pathfinder steering repair. Delphi applies OE-style dimensional and material analysis to help ensure proper match-up between the original part and the aftermarket replacement. This part number, TA3576, is built with a steel housing, rubber dust boot, and POM bearing material for standard replacement service.
Delphi tests steering components under severe conditions, including temperatures below -40 degrees C and above 120 degrees C, plus 720 hours of salt spray exposure. This validation supports consistent performance in demanding road and weather conditions. If you are replacing a worn outer tie rod on a Nissan Frontier, Xterra, or Pathfinder, Delphi TA3576 provides a direct-fit option for the front left outer steering position.
This part cross-references MOOG Chassis Products ES800048 for the same application.
What It Helps Fix
- Loose or vague steering feel
- Clunking or knocking from the front suspension/steering area
- Uneven tire wear caused by worn steering linkage
- Excess play at the front left outer tie rod end
- Steering pull or poor alignment retention after component wear
Installation Notes and Tips
Install TA3576 at the front left outer steering position only. Verify thread direction, stud style, and overall length before installation, and perform a wheel alignment after replacement. Because this is a standard replacement tie rod end, inspect the adjacent steering and suspension components for wear at the same time.
Quality Assurance
Delphi uses OE-focused engineering, dimensional checks, and material analysis to support fit and function across its steering portfolio. TA3576 is validated through temperature cycling and salt spray testing to help confirm durability in real-world service.
Original: $30.92
-65%$30.92
$10.82Description
Delphi TA3576 Front Left Outer Tie Rod End
Delphi TA3576 is a steering tie rod end built for front left outer applications on select Nissan Frontier, Xterra, and Pathfinder models. It combines OE-based dimensional analysis with materials chosen for consistent steering response and proper fitment.
Key Features
- Front left outer steering tie rod end for select Nissan vehicles
- Pre-greased design with dust boot included
- Steel housing and steel tie rod construction
- Painted black finish
- Standard replacement grade
- Mounting hardware included
- Male to female end configuration with threaded stud
- Clockwise thread direction on both ends
- Delphi TA3576 is tested for temperature extremes and salt spray exposure
Detailed Description
Delphi TA3576 is engineered as a direct steering tie rod end replacement for the front left outer position. It is compatible with 2005-2019 Nissan Frontier, 2005-2015 Nissan Xterra, and 2005-2012 Nissan Pathfinder, making it a focused solution for drivers searching for a front left outer tie rod end for Nissan Frontier, Xterra, or Pathfinder steering repair. Delphi applies OE-style dimensional and material analysis to help ensure proper match-up between the original part and the aftermarket replacement. This part number, TA3576, is built with a steel housing, rubber dust boot, and POM bearing material for standard replacement service.
Delphi tests steering components under severe conditions, including temperatures below -40 degrees C and above 120 degrees C, plus 720 hours of salt spray exposure. This validation supports consistent performance in demanding road and weather conditions. If you are replacing a worn outer tie rod on a Nissan Frontier, Xterra, or Pathfinder, Delphi TA3576 provides a direct-fit option for the front left outer steering position.
This part cross-references MOOG Chassis Products ES800048 for the same application.
What It Helps Fix
- Loose or vague steering feel
- Clunking or knocking from the front suspension/steering area
- Uneven tire wear caused by worn steering linkage
- Excess play at the front left outer tie rod end
- Steering pull or poor alignment retention after component wear
Installation Notes and Tips
Install TA3576 at the front left outer steering position only. Verify thread direction, stud style, and overall length before installation, and perform a wheel alignment after replacement. Because this is a standard replacement tie rod end, inspect the adjacent steering and suspension components for wear at the same time.
Quality Assurance
Delphi uses OE-focused engineering, dimensional checks, and material analysis to support fit and function across its steering portfolio. TA3576 is validated through temperature cycling and salt spray testing to help confirm durability in real-world service.
