Delphi SS12385 Engine Crankshaft Position Sensor
Delphi SS12385 Crankshaft Position Sensor
The Delphi SS12385 engine crankshaft position sensor provides OE-calibrated signal accuracy for engine management systems that rely on precise crankshaft data. It is a direct-fit sensor for select Nissan applications, including 2019-2023 Nissan Altima and 2021 Nissan Rogue.
Built with a black housing, 3-pin male terminals, and a single rectangular female connector, this crankshaft position sensor is supplied as the sensor assembly with an instruction sheet. Delphi validates and calibrates its sensors to OE standards to help maintain accurate readings and reduce repeat repairs.
Key Features
- Part number: SS12385
- Engine crankshaft position sensor for ignition and engine management systems
- OE-standard testing and calibration for accurate signal output
- Black sensor body with 1 rectangular connector
- 3 terminal pins, female connector, male terminals
- Package contents: engine crankshaft position sensor and instruction sheet
- No wiring harness included
- No mounting bracket included
Detailed Description
Delphi SS12385 is an engine crankshaft position sensor built for vehicles that depend on consistent crankshaft position feedback for ignition timing and fuel control. This sensor is listed for 2019-2023 Nissan Altima and 2021 Nissan Rogue, making it a focused replacement for those applications. If you are searching for a 2021 Nissan Rogue crankshaft position sensor or a 2019-2023 Nissan Altima crankshaft position sensor, SS12385 is the matching part number to reference.
Delphi’s sensor portfolio is developed and validated using OE-style methods, and each unit is tested and calibrated to OE standards. That level of calibration helps the engine control system receive accurate position data, which supports stable operation and reduces the chance of repeat comebacks. This part cross-references Standard Ignition PC1216 for the same application.
Common Issues This Sensor May Address
- Crankshaft position signal loss
- Hard starting or no-start conditions related to crank signal failure
- Intermittent stalling caused by incorrect engine speed input
- Check engine light concerns tied to crankshaft sensor faults
- Rough running from inconsistent crankshaft position readings
Installation Notes and Tips
Verify connector style, terminal count, and mounting location before installation. This Delphi SS12385 sensor uses a 1-connector, 3-terminal configuration with a rectangular female connector and does not include a wiring harness or mounting bracket. Compare the old sensor to the replacement part and inspect the connector and harness for corrosion, bent pins, or damaged locking tabs before final assembly.
For fitment confirmation, use the vehicle application data exactly as listed: Fits 2019-2023 Nissan Altima, N/A; Fits 2021 Nissan Rogue, N/A.
Quality Assurance
Delphi sensors are tested and calibrated to OE standards and validated through stringent product development methods. That process supports accurate readings and consistent performance in the vehicles listed above.
Delphi SS12385 Crankshaft Position Sensor
The Delphi SS12385 engine crankshaft position sensor provides OE-calibrated signal accuracy for engine management systems that rely on precise crankshaft data. It is a direct-fit sensor for select Nissan applications, including 2019-2023 Nissan Altima and 2021 Nissan Rogue.
Built with a black housing, 3-pin male terminals, and a single rectangular female connector, this crankshaft position sensor is supplied as the sensor assembly with an instruction sheet. Delphi validates and calibrates its sensors to OE standards to help maintain accurate readings and reduce repeat repairs.
Key Features
- Part number: SS12385
- Engine crankshaft position sensor for ignition and engine management systems
- OE-standard testing and calibration for accurate signal output
- Black sensor body with 1 rectangular connector
- 3 terminal pins, female connector, male terminals
- Package contents: engine crankshaft position sensor and instruction sheet
- No wiring harness included
- No mounting bracket included
Detailed Description
Delphi SS12385 is an engine crankshaft position sensor built for vehicles that depend on consistent crankshaft position feedback for ignition timing and fuel control. This sensor is listed for 2019-2023 Nissan Altima and 2021 Nissan Rogue, making it a focused replacement for those applications. If you are searching for a 2021 Nissan Rogue crankshaft position sensor or a 2019-2023 Nissan Altima crankshaft position sensor, SS12385 is the matching part number to reference.
Delphi’s sensor portfolio is developed and validated using OE-style methods, and each unit is tested and calibrated to OE standards. That level of calibration helps the engine control system receive accurate position data, which supports stable operation and reduces the chance of repeat comebacks. This part cross-references Standard Ignition PC1216 for the same application.
Common Issues This Sensor May Address
- Crankshaft position signal loss
- Hard starting or no-start conditions related to crank signal failure
- Intermittent stalling caused by incorrect engine speed input
- Check engine light concerns tied to crankshaft sensor faults
- Rough running from inconsistent crankshaft position readings
Installation Notes and Tips
Verify connector style, terminal count, and mounting location before installation. This Delphi SS12385 sensor uses a 1-connector, 3-terminal configuration with a rectangular female connector and does not include a wiring harness or mounting bracket. Compare the old sensor to the replacement part and inspect the connector and harness for corrosion, bent pins, or damaged locking tabs before final assembly.
For fitment confirmation, use the vehicle application data exactly as listed: Fits 2019-2023 Nissan Altima, N/A; Fits 2021 Nissan Rogue, N/A.
Quality Assurance
Delphi sensors are tested and calibrated to OE standards and validated through stringent product development methods. That process supports accurate readings and consistent performance in the vehicles listed above.
Original: $73.97
-65%$73.97
$25.89Description
Delphi SS12385 Crankshaft Position Sensor
The Delphi SS12385 engine crankshaft position sensor provides OE-calibrated signal accuracy for engine management systems that rely on precise crankshaft data. It is a direct-fit sensor for select Nissan applications, including 2019-2023 Nissan Altima and 2021 Nissan Rogue.
Built with a black housing, 3-pin male terminals, and a single rectangular female connector, this crankshaft position sensor is supplied as the sensor assembly with an instruction sheet. Delphi validates and calibrates its sensors to OE standards to help maintain accurate readings and reduce repeat repairs.
Key Features
- Part number: SS12385
- Engine crankshaft position sensor for ignition and engine management systems
- OE-standard testing and calibration for accurate signal output
- Black sensor body with 1 rectangular connector
- 3 terminal pins, female connector, male terminals
- Package contents: engine crankshaft position sensor and instruction sheet
- No wiring harness included
- No mounting bracket included
Detailed Description
Delphi SS12385 is an engine crankshaft position sensor built for vehicles that depend on consistent crankshaft position feedback for ignition timing and fuel control. This sensor is listed for 2019-2023 Nissan Altima and 2021 Nissan Rogue, making it a focused replacement for those applications. If you are searching for a 2021 Nissan Rogue crankshaft position sensor or a 2019-2023 Nissan Altima crankshaft position sensor, SS12385 is the matching part number to reference.
Delphi’s sensor portfolio is developed and validated using OE-style methods, and each unit is tested and calibrated to OE standards. That level of calibration helps the engine control system receive accurate position data, which supports stable operation and reduces the chance of repeat comebacks. This part cross-references Standard Ignition PC1216 for the same application.
Common Issues This Sensor May Address
- Crankshaft position signal loss
- Hard starting or no-start conditions related to crank signal failure
- Intermittent stalling caused by incorrect engine speed input
- Check engine light concerns tied to crankshaft sensor faults
- Rough running from inconsistent crankshaft position readings
Installation Notes and Tips
Verify connector style, terminal count, and mounting location before installation. This Delphi SS12385 sensor uses a 1-connector, 3-terminal configuration with a rectangular female connector and does not include a wiring harness or mounting bracket. Compare the old sensor to the replacement part and inspect the connector and harness for corrosion, bent pins, or damaged locking tabs before final assembly.
For fitment confirmation, use the vehicle application data exactly as listed: Fits 2019-2023 Nissan Altima, N/A; Fits 2021 Nissan Rogue, N/A.
Quality Assurance
Delphi sensors are tested and calibrated to OE standards and validated through stringent product development methods. That process supports accurate readings and consistent performance in the vehicles listed above.
