Delphi SS12198 Engine Crankshaft Position Sensor
Engine Crankshaft Position Sensor for Chrysler, Dodge, Jeep, and Ram
Delphi SS12198 is an engine crankshaft position sensor built for direct replacement on a wide range of Chrysler, Dodge, Jeep, and Ram applications. It uses a black housing, a 3-terminal blade connection, and a single oval male connector for a clean OE-style electrical interface.
Compatible With 2013-2023 Dodge Challenger, 2014-2023 Dodge Charger, and 2013-2023 Ram 1500 applications, this sensor is also used across multiple Jeep and Chrysler platforms. Delphi SS12198 is calibrated to OE standards to support accurate crankshaft signal readings and reduce repeat repairs.
Key Features
- Engine crankshaft position sensor for ignition and engine management systems
- Black sensor body with 1 oval male connector
- 3 blade terminals with male terminal gender
- No wiring harness included
- No mounting bracket included
- Package contents: engine crankshaft position sensor and instruction sheet
Detailed Product Overview
Delphi SS12198 is engineered for vehicles that rely on precise crankshaft position input for ignition timing and engine control. Delphi validates its sensor lineup using OE development methods and product testing, then calibrates each unit to OE standards for consistent signal output. This helps maintain accurate engine data for Chrysler 300, Dodge Durango, Jeep Grand Cherokee, and Ram 2500 and 3500 applications, among others.
This part cross-references Standard Ignition PC987 for the same application. Delphi SS12198 is also listed with interchange references including 5S13522 and CSS1478.
Common Issues This Sensor May Address
- Crankshaft position signal loss
- Hard starting or extended crank time
- Intermittent stalling
- Rough engine operation related to crank signal errors
- Check engine light concerns tied to crankshaft sensor faults
Installation Notes and Tips
Verify connector shape, terminal count, and sensor location before installation. This sensor uses a single oval male connector with three blade terminals, and it does not include a wiring harness or mounting bracket. Confirm vehicle application by year, make, and model before replacing the original unit.
Fits 2014-2023 Chrysler 300, N/A. Fits 2013-2023 Dodge Challenger, N/A. Fits 2014-2023 Dodge Charger, N/A. Fits 2013-2023 Dodge Durango, N/A. Fits 2013-2023 Jeep Grand Cherokee, N/A. Fits 2021-2023 Jeep Grand Cherokee L, N/A. Fits 2022-2023 Jeep Grand Wagoneer, N/A. Fits 2021-2023 Jeep Wrangler, N/A. Fits 2013-2023 Ram 1500, N/A. Fits 2019-2023 Ram 1500 Classic, N/A. Fits 2013-2023 Ram 2500, N/A. Fits 2013-2023 Ram 3500, N/A. Fits 2022 Jeep Wagoneer, N/A.
Quality Assurance
Delphi backs this sensor with OE-focused development and product validation methods. Each unit is tested and calibrated to OE standards to support accurate readings and dependable operation across the listed vehicle applications.
Engine Crankshaft Position Sensor for Chrysler, Dodge, Jeep, and Ram
Delphi SS12198 is an engine crankshaft position sensor built for direct replacement on a wide range of Chrysler, Dodge, Jeep, and Ram applications. It uses a black housing, a 3-terminal blade connection, and a single oval male connector for a clean OE-style electrical interface.
Compatible With 2013-2023 Dodge Challenger, 2014-2023 Dodge Charger, and 2013-2023 Ram 1500 applications, this sensor is also used across multiple Jeep and Chrysler platforms. Delphi SS12198 is calibrated to OE standards to support accurate crankshaft signal readings and reduce repeat repairs.
Key Features
- Engine crankshaft position sensor for ignition and engine management systems
- Black sensor body with 1 oval male connector
- 3 blade terminals with male terminal gender
- No wiring harness included
- No mounting bracket included
- Package contents: engine crankshaft position sensor and instruction sheet
Detailed Product Overview
Delphi SS12198 is engineered for vehicles that rely on precise crankshaft position input for ignition timing and engine control. Delphi validates its sensor lineup using OE development methods and product testing, then calibrates each unit to OE standards for consistent signal output. This helps maintain accurate engine data for Chrysler 300, Dodge Durango, Jeep Grand Cherokee, and Ram 2500 and 3500 applications, among others.
This part cross-references Standard Ignition PC987 for the same application. Delphi SS12198 is also listed with interchange references including 5S13522 and CSS1478.
Common Issues This Sensor May Address
- Crankshaft position signal loss
- Hard starting or extended crank time
- Intermittent stalling
- Rough engine operation related to crank signal errors
- Check engine light concerns tied to crankshaft sensor faults
Installation Notes and Tips
Verify connector shape, terminal count, and sensor location before installation. This sensor uses a single oval male connector with three blade terminals, and it does not include a wiring harness or mounting bracket. Confirm vehicle application by year, make, and model before replacing the original unit.
Fits 2014-2023 Chrysler 300, N/A. Fits 2013-2023 Dodge Challenger, N/A. Fits 2014-2023 Dodge Charger, N/A. Fits 2013-2023 Dodge Durango, N/A. Fits 2013-2023 Jeep Grand Cherokee, N/A. Fits 2021-2023 Jeep Grand Cherokee L, N/A. Fits 2022-2023 Jeep Grand Wagoneer, N/A. Fits 2021-2023 Jeep Wrangler, N/A. Fits 2013-2023 Ram 1500, N/A. Fits 2019-2023 Ram 1500 Classic, N/A. Fits 2013-2023 Ram 2500, N/A. Fits 2013-2023 Ram 3500, N/A. Fits 2022 Jeep Wagoneer, N/A.
Quality Assurance
Delphi backs this sensor with OE-focused development and product validation methods. Each unit is tested and calibrated to OE standards to support accurate readings and dependable operation across the listed vehicle applications.
Description
Engine Crankshaft Position Sensor for Chrysler, Dodge, Jeep, and Ram
Delphi SS12198 is an engine crankshaft position sensor built for direct replacement on a wide range of Chrysler, Dodge, Jeep, and Ram applications. It uses a black housing, a 3-terminal blade connection, and a single oval male connector for a clean OE-style electrical interface.
Compatible With 2013-2023 Dodge Challenger, 2014-2023 Dodge Charger, and 2013-2023 Ram 1500 applications, this sensor is also used across multiple Jeep and Chrysler platforms. Delphi SS12198 is calibrated to OE standards to support accurate crankshaft signal readings and reduce repeat repairs.
Key Features
- Engine crankshaft position sensor for ignition and engine management systems
- Black sensor body with 1 oval male connector
- 3 blade terminals with male terminal gender
- No wiring harness included
- No mounting bracket included
- Package contents: engine crankshaft position sensor and instruction sheet
Detailed Product Overview
Delphi SS12198 is engineered for vehicles that rely on precise crankshaft position input for ignition timing and engine control. Delphi validates its sensor lineup using OE development methods and product testing, then calibrates each unit to OE standards for consistent signal output. This helps maintain accurate engine data for Chrysler 300, Dodge Durango, Jeep Grand Cherokee, and Ram 2500 and 3500 applications, among others.
This part cross-references Standard Ignition PC987 for the same application. Delphi SS12198 is also listed with interchange references including 5S13522 and CSS1478.
Common Issues This Sensor May Address
- Crankshaft position signal loss
- Hard starting or extended crank time
- Intermittent stalling
- Rough engine operation related to crank signal errors
- Check engine light concerns tied to crankshaft sensor faults
Installation Notes and Tips
Verify connector shape, terminal count, and sensor location before installation. This sensor uses a single oval male connector with three blade terminals, and it does not include a wiring harness or mounting bracket. Confirm vehicle application by year, make, and model before replacing the original unit.
Fits 2014-2023 Chrysler 300, N/A. Fits 2013-2023 Dodge Challenger, N/A. Fits 2014-2023 Dodge Charger, N/A. Fits 2013-2023 Dodge Durango, N/A. Fits 2013-2023 Jeep Grand Cherokee, N/A. Fits 2021-2023 Jeep Grand Cherokee L, N/A. Fits 2022-2023 Jeep Grand Wagoneer, N/A. Fits 2021-2023 Jeep Wrangler, N/A. Fits 2013-2023 Ram 1500, N/A. Fits 2019-2023 Ram 1500 Classic, N/A. Fits 2013-2023 Ram 2500, N/A. Fits 2013-2023 Ram 3500, N/A. Fits 2022 Jeep Wagoneer, N/A.
Quality Assurance
Delphi backs this sensor with OE-focused development and product validation methods. Each unit is tested and calibrated to OE standards to support accurate readings and dependable operation across the listed vehicle applications.
