Delphi FE0816 Electric Fuel Pump
Delphi FE0816 Electric Fuel Pump
The Delphi FE0816 is a premium in-tank electric fuel pump for gasoline applications, built for specific-fit replacement on select Hyundai and Kia vehicles. It delivers 43 to 87 psi pressure range, 47.0 average flow rating, and 12-volt operation for dependable fuel delivery in the applications listed below.
Fits 2018-2023 Hyundai Kona, N/A. Fits 2015-2021 Kia Sedona, N/A. Fits 2021 Kia Seltos, N/A. Fits 2017-2020 Hyundai Elantra, N/A.
Key Features
- Delphi FE0816 electric fuel pump for gasoline fuel systems
- Internal turbine pump design for specific-fit applications
- 12.0V operation with 11.0 amp average current draw
- 43 to 87 psi operating pressure range
- 47.0 average flow rating
- Blade terminals, 2 terminals, female connector, rectangle connector shape
- Outlet type: hose; outlet outside diameter: 0.375 in.
- Package contents: electric fuel pump, bracket and hardware, (4) hose clamps, (2) hose pieces, instruction sheet
Detailed Description
Delphi FE0816 is an internal electric fuel pump engineered for specific gasoline applications in the Hyundai Kona, Kia Sedona, Kia Seltos, and Hyundai Elantra. It uses a turbine pump design and is specified with an 11 mm inlet outside diameter, 0.375 in. outlet outside diameter, and a hose-style outlet connection. The unit is rated for 12 volts, has a maximum pressure of 87 psi, and draws 11.0 amps on average.
Delphi has supplied fuel system components to global vehicle manufacturers for decades and brings OE-focused fuel delivery experience to this replacement pump. Part number FE0816 is also referenced by interchange number 31119-A9000 for the same application. Use FE0816 when replacing a worn or failing pump on compatible Hyundai Kona, Kia Sedona, Kia Seltos, or Hyundai Elantra fuel systems.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine hesitation or stumble under load
- Loss of fuel delivery from a failing in-tank pump
- Low-pressure fuel system performance issues
- Intermittent drivability problems tied to pump wear
Installation Notes and Tips
Confirm the vehicle application, connector style, terminal count, and pressure requirements before installation. This is a specific-fit internal pump for gasoline systems, so verify the tank module layout and hose connection details on the vehicle before service. The package includes the pump, bracket and hardware, hose clamps, hose pieces, and an instruction sheet; no fuel sending unit, regulator, gasket, seal, lock ring, strainer, or wiring harness is included.
Quality Assurance
Delphi is a Tier 1 supplier with long-standing fuel system engineering experience and extensive OE-proprietary fuel technology development. FE0816 is built to meet the demands of the listed Hyundai and Kia applications, including Kona, Sedona, Seltos, and Elantra fitments.
Delphi FE0816 Electric Fuel Pump
The Delphi FE0816 is a premium in-tank electric fuel pump for gasoline applications, built for specific-fit replacement on select Hyundai and Kia vehicles. It delivers 43 to 87 psi pressure range, 47.0 average flow rating, and 12-volt operation for dependable fuel delivery in the applications listed below.
Fits 2018-2023 Hyundai Kona, N/A. Fits 2015-2021 Kia Sedona, N/A. Fits 2021 Kia Seltos, N/A. Fits 2017-2020 Hyundai Elantra, N/A.
Key Features
- Delphi FE0816 electric fuel pump for gasoline fuel systems
- Internal turbine pump design for specific-fit applications
- 12.0V operation with 11.0 amp average current draw
- 43 to 87 psi operating pressure range
- 47.0 average flow rating
- Blade terminals, 2 terminals, female connector, rectangle connector shape
- Outlet type: hose; outlet outside diameter: 0.375 in.
- Package contents: electric fuel pump, bracket and hardware, (4) hose clamps, (2) hose pieces, instruction sheet
Detailed Description
Delphi FE0816 is an internal electric fuel pump engineered for specific gasoline applications in the Hyundai Kona, Kia Sedona, Kia Seltos, and Hyundai Elantra. It uses a turbine pump design and is specified with an 11 mm inlet outside diameter, 0.375 in. outlet outside diameter, and a hose-style outlet connection. The unit is rated for 12 volts, has a maximum pressure of 87 psi, and draws 11.0 amps on average.
Delphi has supplied fuel system components to global vehicle manufacturers for decades and brings OE-focused fuel delivery experience to this replacement pump. Part number FE0816 is also referenced by interchange number 31119-A9000 for the same application. Use FE0816 when replacing a worn or failing pump on compatible Hyundai Kona, Kia Sedona, Kia Seltos, or Hyundai Elantra fuel systems.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine hesitation or stumble under load
- Loss of fuel delivery from a failing in-tank pump
- Low-pressure fuel system performance issues
- Intermittent drivability problems tied to pump wear
Installation Notes and Tips
Confirm the vehicle application, connector style, terminal count, and pressure requirements before installation. This is a specific-fit internal pump for gasoline systems, so verify the tank module layout and hose connection details on the vehicle before service. The package includes the pump, bracket and hardware, hose clamps, hose pieces, and an instruction sheet; no fuel sending unit, regulator, gasket, seal, lock ring, strainer, or wiring harness is included.
Quality Assurance
Delphi is a Tier 1 supplier with long-standing fuel system engineering experience and extensive OE-proprietary fuel technology development. FE0816 is built to meet the demands of the listed Hyundai and Kia applications, including Kona, Sedona, Seltos, and Elantra fitments.
Original: $98.95
-65%$98.95
$34.63Description
Delphi FE0816 Electric Fuel Pump
The Delphi FE0816 is a premium in-tank electric fuel pump for gasoline applications, built for specific-fit replacement on select Hyundai and Kia vehicles. It delivers 43 to 87 psi pressure range, 47.0 average flow rating, and 12-volt operation for dependable fuel delivery in the applications listed below.
Fits 2018-2023 Hyundai Kona, N/A. Fits 2015-2021 Kia Sedona, N/A. Fits 2021 Kia Seltos, N/A. Fits 2017-2020 Hyundai Elantra, N/A.
Key Features
- Delphi FE0816 electric fuel pump for gasoline fuel systems
- Internal turbine pump design for specific-fit applications
- 12.0V operation with 11.0 amp average current draw
- 43 to 87 psi operating pressure range
- 47.0 average flow rating
- Blade terminals, 2 terminals, female connector, rectangle connector shape
- Outlet type: hose; outlet outside diameter: 0.375 in.
- Package contents: electric fuel pump, bracket and hardware, (4) hose clamps, (2) hose pieces, instruction sheet
Detailed Description
Delphi FE0816 is an internal electric fuel pump engineered for specific gasoline applications in the Hyundai Kona, Kia Sedona, Kia Seltos, and Hyundai Elantra. It uses a turbine pump design and is specified with an 11 mm inlet outside diameter, 0.375 in. outlet outside diameter, and a hose-style outlet connection. The unit is rated for 12 volts, has a maximum pressure of 87 psi, and draws 11.0 amps on average.
Delphi has supplied fuel system components to global vehicle manufacturers for decades and brings OE-focused fuel delivery experience to this replacement pump. Part number FE0816 is also referenced by interchange number 31119-A9000 for the same application. Use FE0816 when replacing a worn or failing pump on compatible Hyundai Kona, Kia Sedona, Kia Seltos, or Hyundai Elantra fuel systems.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine hesitation or stumble under load
- Loss of fuel delivery from a failing in-tank pump
- Low-pressure fuel system performance issues
- Intermittent drivability problems tied to pump wear
Installation Notes and Tips
Confirm the vehicle application, connector style, terminal count, and pressure requirements before installation. This is a specific-fit internal pump for gasoline systems, so verify the tank module layout and hose connection details on the vehicle before service. The package includes the pump, bracket and hardware, hose clamps, hose pieces, and an instruction sheet; no fuel sending unit, regulator, gasket, seal, lock ring, strainer, or wiring harness is included.
Quality Assurance
Delphi is a Tier 1 supplier with long-standing fuel system engineering experience and extensive OE-proprietary fuel technology development. FE0816 is built to meet the demands of the listed Hyundai and Kia applications, including Kona, Sedona, Seltos, and Elantra fitments.
